the way the white posca cap landed when u flicked it off ❤
@Start-up56
10 ай бұрын
I just noticed 😮
@feralfox5137
8 ай бұрын
Certified dude perfect moment right there
@WhitneyDiamondPaints
5 ай бұрын
Perfection
@roi_zeta
3 ай бұрын
I noticed too😂
@ABC-tt7qe
11 ай бұрын
Woahhhhh! I’m about to order everything, I’m so excited to start making these 🤩❤️❤️❤️
@TheGamingInkling
9 ай бұрын
I had a science teacher in elementary school that showed us and let us use this material to make a tiny animal cell. I complete forgot this existed until now
@randomuse-yv4vd
Ай бұрын
what kind of plastic is she using for making the keychain?
@TheGamingInkling
Ай бұрын
@@randomuse-yv4vd I got no clue, but the brand is Shrinky Dinks
@hasiakter6421
Ай бұрын
@@randomuse-yv4vdI think u can also use vegetable boxes(plastic one)
@YoungDymisty
9 күн бұрын
@@randomuse-yv4vd not sure of the type of plastic but there called shrink plastic too. So just looked it up and it's apparently polystyrene. hmm 🤔 who knew lol.
@samtajangid2697
2 ай бұрын
Which paper are you using?? Can we use any other paper to make this??
@YoungDymisty
9 күн бұрын
If you mean the paper under the plastic then yes, as it's just for tracing your drawings so it doesn't matter. Or you can draw freehand if you're capable.😊 To add if you meant the actual plastic, it's shrink wrap plastic so you don't have to get it from this specific brand or person.
@Aquiq0
Жыл бұрын
LOVE IT!
@LAC02_
Жыл бұрын
this is so cool im subbing!!
@Oceanzzbeads
7 ай бұрын
You're my inspirator to also make keychains:)
@StampinWithLaDiva
7 ай бұрын
Omg! That’s awesome! ❤
@Kolet-mi7vh
29 күн бұрын
Good job!Well done!Perfect!😊😊😊😊
@w_b_mplease9715
4 ай бұрын
I've never seen this before and now I wanna try it out!
@MsMtwardy
Ай бұрын
Need to try this❤❤❤
@user-iq8eq8cr3n
8 ай бұрын
LOVE THIS
@neihsungch2112
Жыл бұрын
I’ve done this before.It was fun!
@chikowacloudbun
6 ай бұрын
Omg so cute❤❤
@ghaniahamdun5322
4 ай бұрын
Wow😊
@ElMegazt
8 ай бұрын
Nekobox, can u explain in a full video this?
@marbles2468
9 ай бұрын
Question, what did you apply before coating the thing in acrylic?
@meet-me-at-blue-diner
3 ай бұрын
Mod podge I think? If that's what you were talking about
@YoungDymisty
9 күн бұрын
I also thought it was Mod Podge although if it's B4 the resin and not on the back I'm not sure why as poscas seem to have worked with resin for other people doing this so maybe theirs aren't compatible. Or it's just a safety measure.
@TheUSA100PERCENTREAL
7 күн бұрын
What material is this?
@SOCATSOFTPAWS
7 ай бұрын
So cute😸😸👍
@juitfruce
3 ай бұрын
Its really so cute!! I love it so much!!!❤❤❤❤ I want to make something like this myself, and i want to know, is the modge podge necassary?
@Pollywoods3
Ай бұрын
:3
@this.is.carson
7 ай бұрын
I could never lol 😂 you hands are so steady
@kindiocensanchez193
4 ай бұрын
What did you use ?
@_Da1zy
6 ай бұрын
The pastel posca marker were mwahh
@danieltrezub8130
Ай бұрын
What kind of resin is that?
@headphone943
28 күн бұрын
What kind of resin ?
@regiiiii-i
8 ай бұрын
Wow! How long did you put it in the oven?😊
@_sasaaaa
3 ай бұрын
The temperature and how long do I have to bake it in oven??
@blackb.3184
3 ай бұрын
What is that material u paint on
@user-ot9qh4cg9w
5 ай бұрын
How much time do you leave it in for
@HappyAnglerfish-dg8qe
2 ай бұрын
What the name of this products?
@goober5656
3 ай бұрын
can you name the type of plastic you used?
@YoungDymisty
9 күн бұрын
Apparently it's polystyrene.
@smallworldswedishdoll1687
8 ай бұрын
What did you use to draw over it
@SimpyStarr
7 ай бұрын
What did you draw that on?
@aniiii_wxs
16 күн бұрын
i heard the music and immediately thought DASHIE!?!?!?!?
@YounisAhmed-fb4nb
Ай бұрын
Sml fans will instantly remember this beat
@jamescaro186
22 күн бұрын
Con que plástico lo hiciste y con que lo secare
@Bengali_girl_aishu
3 ай бұрын
The black sharpie's cap be like: wieeeeee,I knew I could flyyyyyyy😂😂😂
@11.11_edits___
7 ай бұрын
What's that liquid?
@asriadi3807
8 ай бұрын
Cute. Can I get it ?
@justwatch302
3 ай бұрын
What are all that material you used for making this
@YoungDymisty
9 күн бұрын
Shrink plastic, paper, posca markers, heat tool and oven.
@koziefox
8 ай бұрын
How long did you wait to apply resin after using mod podge?
@AlexAkaCheese
7 ай бұрын
I assume you just wait till after the mod podge dries completly
@dtonyechannel1980
7 ай бұрын
Gloss or matte in mod podge of which one ?
@MeowChumpswinnsie
8 ай бұрын
What kind of material are you using??? The final touch of those 2 liquids you applied
@nekoboxus
8 ай бұрын
Those are mod podge and uv resin.
@ReetalAbuanza
4 ай бұрын
I tried it but my keychains just kept popping up and it didn't work out 😢
@kindiocensanchez193
4 ай бұрын
Oh i got it
@sarahaes
2 ай бұрын
What is the transparent liquid you used at the end? Is it necessary? Please tell me anybody
@headphone943
28 күн бұрын
It’s called resin and in my opinion not really but it gives the keychain more of a shine so it looks like you bought it at the store 😂
@lonnibaird8018
8 ай бұрын
Did you use both Mod Podge and UV resin? Please tell me what that does, as opposed to just using one? Thanks for sharing!
@nekoboxus
8 ай бұрын
Mod podge is for sealing the drawing with permanent ink, and uv resin is for the final touch to make the charm shiny. Without Mod podge the permanent ink bleeds into the resin.
@lonnibaird8018
8 ай бұрын
OK.. thank you 😊
@1ElleElle
6 ай бұрын
@@nekoboxusalso fun fact: UV resin does not stick to polystyrene (what shrink paper is made of). The layer would peel off if you didn’t seal first. ALSO I’ve been pretty obsessed with this song since I watched this video. Too bad the artist doesn’t seem to have many more… 🎶
@roshelhass7559
3 ай бұрын
@@1ElleEllecan you pleaaase tell me what kind of paer that she put in oven? And what temperature and how much time? And can we do it with no resin?? Sorry too many questions
@YoungDymisty
9 күн бұрын
@@roshelhass7559 it's not paper it's shrink plastic and I can't recommend a specific temperature or time as each brand may be different. But Google should give you a round about figure. And no you don't have to use resin if you don't want to It just makes it stand out more and gives it a dome. And it can protect it longer. But it's not necessary. Hopefully that answers some Hun.
@Lootmoongirl212
5 ай бұрын
For example, if the paper has been printed, is it colored again or Directly in the paper oven
@YoungDymisty
9 күн бұрын
Not sure how to answer 100% as your comment isn't clear but as the paper doesn't go in the oven you just use it to trace your picture onto the plastic, then colour it in, then it goes into the oven.
@Boloroo-kb5bu
3 ай бұрын
His look like a Suga ❤😅😅😅
@shinybloxxx
3 ай бұрын
Song name?❤
@myekilz
3 ай бұрын
Also for those who dknt have keychain you can use paper clips! (Also creator can you pin this so other's know)
@user-my1iw4pw5e
29 күн бұрын
what were u drawing on? Butter paper?
@YoungDymisty
9 күн бұрын
The clean thing is shrink plastic.
@cinnabar646
9 ай бұрын
Wait what did u do to have clear edges ??
@adaperez4770
8 ай бұрын
When the item was trimmed, they left a little edge
@marvelousmedesigns6806
6 ай бұрын
Im sooooo frustrated 😢I have White Shrink Plastic...I also have a white background on my images. When I put the resin on the printed/frosted side, the white becomes TRANSPARENT 😢😢😢
@sylviaskitchen7213
9 ай бұрын
Hi, May I know what is the white liquid you use and what is it for?
@GreenEyeCatto
9 ай бұрын
Mod podge - it's a multipurpose glue and sealer, they're using it to seal the acrylic paint before they put the UV resin down. :)
@kubrag2246
7 ай бұрын
@@GreenEyeCatto in my country mod podge is really expensive. Can ı use varnish instead of mod podge ?
@surbhiverma17
2 ай бұрын
What have u applied as a color protection
@YoungDymisty
9 күн бұрын
I think they used a glue like Mod Podge then resin.
@urfavxMaisy
6 ай бұрын
No one is gonna talk about the posca cap landing💀
@queencyvirador8214
8 ай бұрын
What's the name of the Shiner on the keychain?
@nekoboxus
8 ай бұрын
That’s uv resin.
@adeenakbar9728
8 ай бұрын
Will it work with color pencils
@klarag7059
6 ай бұрын
Yes. Practice on scraps first though.
@skinnysince96
7 ай бұрын
Have ýou ever tried to draw 2 side of it?
@namswsan5350
5 ай бұрын
Is it suitable for any type of color?
@YoungDymisty
9 күн бұрын
I haven't seen it used with oil or watercolour I believe. I think I saw it tried with paint and it cracked. So using colour pencils or any type marker.
@Amayaactive
5 ай бұрын
Where can i get this from? I want to make a danganronpa one
@ahmadchairil8329
9 ай бұрын
Are there any alternative of Posca
@nekoboxus
9 ай бұрын
Sure, most acrylic markers. There are also off brands which are a lot cheaper. It all depends on quality of the product you are trying to make.
@user-st8nv4wr4t
9 ай бұрын
What is the material you used that melted in the oven
@GreenEyeCatto
9 ай бұрын
Shrink plastic (looks like shrinky dinks brand)
@daphnie.arguelles
Ай бұрын
What did you apply after mod podge?the transparent one);?😅9
@headphone943
28 күн бұрын
It’s resin I’m just not sure what kind
@itzymidzy3044
11 ай бұрын
What kind of plastic do you use-?
@literally.gemmaa
9 ай бұрын
They used a shrinky dink kit
@kd4472
8 ай бұрын
You use "shrink plastic" sheets, "Frosted" type (or DIY, regular clear, sanded on 1 side; sanded side provides a "tooth" and allows you ta add color with colored pencils, chalks, Posca markers as used in this video, and more... ).
@roshelhass7559
3 ай бұрын
@@kd4472please explain everything she used in the video.. 😢 i want to make some but scared to try
@azuritegenshin
15 күн бұрын
Does any plastic sheet work?
@YoungDymisty
9 күн бұрын
I've seen some people use the think plastic from packaging but you do have to be careful as some plastics leach harmful gases when heated.
@NajmaRashid-bc8vngghjh
6 ай бұрын
Ap nae is ko simple oven mae heat kiya hai
@khushiaggarwal5314
12 күн бұрын
What kind of paper sheet it is
@YoungDymisty
9 күн бұрын
The plastic is shrink plastic.
@YoungDymisty
9 күн бұрын
The paper is just any standard paper to trace.
@funtimewithdevashree5794
5 ай бұрын
Pls tell me which kind of paper did u use to put in oven
@YoungDymisty
9 күн бұрын
It's not paper it's shrink plastic.
@mizuki5081
8 ай бұрын
What is it call the thing that you paint on
@klarag7059
6 ай бұрын
Shrink plastic
@Bakanyanchii
4 күн бұрын
Shrink paper and uv resin and that.s that white goo you spread on it before the resin? Then after resin hot air right? To get bubbles out and then uv light
@Sonah889_
2 сағат бұрын
I invite you to Islam
@Bakanyanchii
40 минут бұрын
@@Sonah889_ huh?
@Sonah889_
6 минут бұрын
I invite you to enter Paradise and stay away from Hell
@Annanasso
2 ай бұрын
What did u draw on
@headphone943
28 күн бұрын
It’s shrinky dink plastic they sell it on Amazon
@ridasarwar6569
Ай бұрын
Can anyone plzzzzz help me with the name of the material😩✨
@nekoboxus
Ай бұрын
It’s shrink plastic/paper.
@ridasarwar6569
Ай бұрын
@@nekoboxus thnx dude✨
@hereandthere5929
10 ай бұрын
Was that resin after mod podge?
@warlorty
9 ай бұрын
Yeah, it was. It's UV resin.
@NanaLoca1975
2 ай бұрын
Which Mod Podge?
@headphone943
28 күн бұрын
Gloss mod podge the orange label
@user-dg9kg2hs9d
Ай бұрын
Catnap please 😢
@escapedgoat5865
6 ай бұрын
Wait is there a reason why u put modge podge before u out resin
@klarag7059
6 ай бұрын
Seals the ink to prevent bleeding into the resin.
@escapedgoat5865
6 ай бұрын
@klarag7059 thank you. Now I know what to expect. Didn't think about the ink bleeding
@tutun6132
5 ай бұрын
What's this plastic called?
@kmacconk2803
4 ай бұрын
The paper she starts with is shrinky dink paper, then seals the drawing with Mod podge then a layer of uv resin that is cured with a ultra violet light to harden it
@roshelhass7559
3 ай бұрын
@@kmacconk2803can this be done without resin??
@jasminkauai
7 ай бұрын
Why mog pog and resin?
@kmacconk2803
4 ай бұрын
So the drawing doesn't bleed into the resin
@jasminkauai
4 ай бұрын
Thank you @@kmacconk2803
@SeniorVortex
5 ай бұрын
Which type of plastic is this plz inform me
@effiewang5631
5 ай бұрын
shrink plastic
@jaxspacks
5 ай бұрын
Shrink a dink
@FhM-iw7rr
3 ай бұрын
can I get one
@azumichii831
Жыл бұрын
I don't have an oven, how can I replace it?
@nekoboxus
Жыл бұрын
If you don’t have a toaster oven, you can use a conventional oven or a heat gun.
@Berri_Bunn
Жыл бұрын
I’ve seen people blow dry it
@azumichii831
Жыл бұрын
@@Berri_Bunn Thanks, I'll try and let you know if it works.
@Berri_Bunn
Жыл бұрын
@@azumichii831 np :)
@kd4472
8 ай бұрын
@@Berri_BunnBlow dryers do NOT produce enough heat to shrink the plastic. 😢 (If they did, they would be a safety hazard and you'd only use them ONCE on your head/hair and you'd be lucky not to end up in an ER.) A toaster oven or a heat gun (some of which LOOK somewhat like blow dryers) works as they get hot enough to shrink the plastic. I rarely use the oven; I've been using a heat gun with great success for 20+ years. I've been working with shrink materials since they first hit the market in the 70s.
@navaneethac6946
5 ай бұрын
How many of you herd "bye maaa" in the back
@dogesmipasion
3 ай бұрын
make me a kuromi one and send it bc I follow you and like every video, by the way, can you pin me?
Пікірлер: 162