Dude! This is awesome. I have been in the industry for 20+ years, and I have built most of all my gear. EXCELLENT JOB! At first I was wondering why you hung the rails on the bottom of the spreaders, and then you flipped the whole thing to lay it on the floor.... pure genius. It is little things like that that will revolutionize the industry. I once made a "dolly" of sorts back in the 90's out of a circle of plywood and some swivel rollerblade wheels, they can be found on most sets now. Keep building your own stuff and show the world my man!!
@jaismith06
Жыл бұрын
Thank you so much mate. As a independent filmaker we allways have the challenge achive great quality camera movements in our constraint budget.. Still findings new ways and new ideas to make good movies at low budget.. Really happy to here you like my video and thankyou you somuch for the inspiring comments... 🙏🙏🙏
@OrenArieli
Жыл бұрын
Kudos to you on a great looking build. Happy filming.
@jaismith06
8 ай бұрын
Thankyou 🙏
@obr-fotograf
Жыл бұрын
Thank you for an inspiration! You gave me an idea how to do it!
@jaismith06
Жыл бұрын
You are welcome mate.. ❤️🙏
@davidhefner5668
5 ай бұрын
Why so many wheels? You only need eight. Otherwise your your hitting the same chuck hole twice as much. Make sense?
@jaismith06
5 ай бұрын
Thanks for the information
@ItsChrisAngeles
2 жыл бұрын
That’s awesome. good job
@jaismith06
8 ай бұрын
Thankyou
@adonispuscas
2 ай бұрын
Can you tell me what size of the wheels or better yet do you have a link of what you purchased?
@jaismith06
2 ай бұрын
I couldn't find the same item which i bought from amazon, but i can send u a link of similar one if u want
@PeacefulMoments1844
2 ай бұрын
Share it here if possible. Thanks
@jaismith06
2 ай бұрын
PATIKIL Longboard Wheels with Bearings ABEC-11, Street Wheels for Skateboards Cruiser Wheel Replacement amzn.eu/d/2sOJ886
@sterlingadgate9551
2 жыл бұрын
Well done! Where are you based?
@jaismith06
8 ай бұрын
I am based in cardiff,uk
@SoloTraceur
2 жыл бұрын
If you could weld me the steel wheel trucks, I would buy them....I've made everything else myself
@jaismith06
8 ай бұрын
😄😄
@PoojaSharma-gy3yj
7 ай бұрын
Please share camera holder link
@jaismith06
7 ай бұрын
It is actually the part of my manfrotto tripod
@thaddeuscorea
Жыл бұрын
brilliant
@jaismith06
8 ай бұрын
Thankyou
@thaddeuscorea
8 ай бұрын
@@jaismith06 a small tip from a fellow builder of things :) in the video you fully tightened the wheel assemblies to the base board before putting it on the rails, and when you did put it on the rails, one of the wheels was not turning. You probably fixed this later, but you should have put the base + wheels onto the rails and then done the final tightening of the wheel assemblies so they would be square to the rails with all wheels engaging the rails equally.
@INSEONGJOE
Жыл бұрын
주문제작 부탁하고 싶군요~
@jaismith06
8 ай бұрын
Sorry i dont sell this just made because cant afford to buy new rigs
@jimmyzjam
Жыл бұрын
Where can I find the piece of metal at 2:23. What is that called? And the piece at 3:15 also?
@jaismith06
8 ай бұрын
2:23 That is just a bracket which i got from car boot sale. U can get a u channel instead
@jaismith06
8 ай бұрын
Rapid Adapter Convert with 1/4" Screw 2-Pack, Multi-Functional Light Stand Tip Adapte
@jimmyzjam
8 ай бұрын
@@jaismith06 Thanks so much for the response. All help is appreciated. Where did you buy the black truss holders, I Can't seem to find the right size.
@jaismith06
8 ай бұрын
LOYEA Stage Light Clamp for DJ Lighting Truss,DJ Light Aluminium Material Stage Light 100kg 48-51mm Hook Light Clamp Holder amzn.eu/d/foeG96l
@SoloTraceur
2 жыл бұрын
Hi, do you sell these? Thanks.
@jaismith06
8 ай бұрын
Sorry i dont sell.just made these for my own use . cant afford to buy all tese rigs 😄
@SoloTraceur
8 ай бұрын
@@jaismith06 ah thanks for replying. I ended up making my own anyway.
@jaismith06
8 ай бұрын
Sorry for delyed replay i was not much active in youtube
@davidhefner5668
5 ай бұрын
I do.
@user-xg7cm8ol5u
7 ай бұрын
Please share link for wheel buy
@jaismith06
7 ай бұрын
PATIKIL Skate Wheels with Durable Bearings Skate Brakes Wear-Resistant PU Wheels Replacements for Quad Skates and Skateboard amzn.eu/d/1eGKdRg
@user-xg7cm8ol5u
7 ай бұрын
@@jaismith06 thanks for sharing ❤️
@user-xg7cm8ol5u
7 ай бұрын
This video has proved very beneficial for me. Can you tell me which tripod you have used according to the weight of this camera and dolly. Please tell me this also. Please share link
Пікірлер: 50