◀ Kim Ji-woon’s site Wikipedia ▶
Are you searching for a sink manufacturing company? Sink lower cabinet DIY Sink upper cabinet DIY is possible.
Sink DIY World Construction Materials can replace the sink at an affordable price by using a simple cutting program.
The price of replacing the lower cabinet of the sink is about 10,000 won per door.
Organize lower cabinets the way you want through your own DIY.
The best way to replace the countertop with artificial marble is by considering the manufacturing cost.
Even if dust flies, if you sand it with a sanding machine and reuse it as if it were new, it will be like a new product.
When making a wooden sink top, you can also replace it with laminated wood in addition to high-gloss products.
Moisture-resistant coated plywood cutting for formwork can also be cut using the cutting program.
High gloss literally means high gloss.
LPM products are high-gloss plywood.
For high-gloss plywood prices, please check the cutting program for the desired size.
Cutting plywood for various furniture is also possible.
We provide cutting services through CNC machine cutting.
The sink remodeling company is World Building Materials DIY Company.
For sink remodeling costs, please check through our foundation program.
The cost of remodeling the sink top can be paid directly through sanding.
The downside to painting a sink is that if done correctly, the color may look neat right away.
If the existing sink PB particle board product is damaged,
It is corroded and cannot function again.
You don't have to bear the entire cost of sink remodeling; you can replace only the parts you want at low cost.
Furniture manufacturing companies are important, but in this era of high prices, self-DIY
We recommend creating a cost-effective product with your own specifications at an affordable price.
Join World Building Materials, the leader in sink door replacement.
◀ World Construction Materials Site Manager Shin Woo-ram ▶
Hello, I am Shin Woo-ram, a field manager at World Building Materials.
We would like to introduce you to a new product this time.
If you look at the sink, it is very old.
So, if you look at it with a lot of hand stains, the film has also peeled off.
We are trying to cleanly replace it with a new product.
If you look at it, there is a skirting board underneath, but since it is an old product, it has consumed a lot of water and is corroded.
We will replace everything, even the skirting boards, with new ones.
If you look at it now, the old film-processed products are made by rolling the film on a curved surface and attaching it.
Can fall off easily
If you look at it like this, in the case of our product, the film is produced on the door.
It is shipped separately with the edges strongly attached. The edges are also neatly finished.
Usually, in the case of old sinks, they are shipped with a thickness of 18T. Particle Board
Because of this, it is a heavy product, but if you look, it is installed at a thickness of 18T.
In the case of the World Building Materials product released this time, it is made of high-density MDF (Medium-density fiberboard).
18T thickness is available, and it is safe to install with 15T thickness, so if you want something more sturdy, we recommend 18T thickness.
I think you can check the foundation program.
Before cutting, I will show you how to measure the size of the sink to fill in the dimensions.
In the case of older products, there are curved parts on the outside.
Rather than measuring from the front of this part, it is more accurate to open it at the back and measure at a right angle.
The size is 395mm wide and 795mm tall. If you look here, in the case of a sink cabinet, a sink hinge is included, so a separate hole hole is required.
If you do not enter the hole location separately, the holes will be 100 mm from the top to the middle and 100 mm from the bottom to the middle.
One thing to keep in mind is that old sinks are made of particle board, but they are made of wood.
Processed material made by crushing the remaining waste into small pieces, mixing it with adhesive, and pressing it at high temperature and pressure.
There is a hole in it, so there is a risk that the piece will fall out if it goes in over time.
If you fix it in the same position as the existing piece, there is a risk of it falling off.
We will ship the sink hinge with a separate hole of 5mm above or 5mm below.
Just keep this in mind and place an order.
Next, the door to be replaced is a shoe cabinet. You can fill in the size you want and enter it into the cutting program.
In the case of sink hinges, there are two parts of three, but if three parts are inserted, the sink hole hole location in the center is
#diy #sink #making
Негізгі бет DIY DIY sink making reform LPM film plywood high gloss price only 10,000 won?
Пікірлер: 16