Video tutorial on how to replace the battery and complete disassembly of a Dodge/Chrysler/Plymouth/Mopar keyless remote. The disassembly includes how to open the case, remove the battery, circuit board, and buttons. This keyless remote is found in the years of 1999 to 2006 and the models include Neon, Intrepid, Sebring, Stratus, PT Cruiser, Avenger, Dakota, Durango, Ram, 1500, 2500, 3500, Voyager, Caravan, Grand Caravan, Viper, Sprinter, and Town and Country. Part number GQ43VT17T. This particular tutorial was done on a 2003 Dodge Dakota.
Website: 4diyers.com
Facebook: / 4diyers
Google Plus: plus.google.co...
Twitter: / 4diyers
Instagram: / 4diyers
Tumblr: / 4diyers
Pintrest: / 4diyers
Tools/Supplies Needed:
-two lithium batteries model number CR2016
-coin or standard/flat screwdriver
Procedure:
-work in an area where you don't risk losing any small parts
-find a slot on the side of the case and use a coin or standard screwdriver to pry the case apart
-once apart, the battery will be exposed on the backside of the case
-the battery simply snaps into place and can be removed using your fingers
-a replacement battery is two lithium batteries model number CR2016
-to remove the circuit board and button assembly, slowly pull the rubber push pad from the case, assisting by pushing the buttons on the opposite side
-then to remove the circuit board, unwrap the push pad from around the circuit board
-reassembly in reverse of disassembly
Thank you to all those who watch my videos and support my content. Don't forget to subscribe to my channel for future tutorial videos and like my video if you found it helpful. New videos are always being uploaded every week!
© 4DIYers 2013
All Rights Reserved
No part of this video or any of its contents may be reproduced, copied, modified or adapted, without the prior written consent of the author.
Негізгі бет DIY: Dodge Keyless Remote Battery Replacement & Disassembly
Пікірлер: 91