That metal on metal seems like a good way to dull your bit.
@HacksbyDad
3 жыл бұрын
I guess so if you press the bit hard against the metal corner brace and angle the bit too much. I just use the jig occasionally so I'm not worried about dulling my bits. Thanks for the feedback! 😎
@hickscorp
2 ай бұрын
I don't think wood drill bits work this way. The swirls are to extract sawdust. From their side, drill bits are more or less flat. Only the tip sharpness matters.
@mtlicq
2 ай бұрын
without the metal bracket, the bit may abrade the inside corner of the wood and your bit may not actually be going straight in
@satchm05
2 жыл бұрын
This could actually be handy. One thing to help might be to add some sort of nonstick surface to the bottom to keep it from walking.
@HacksbyDad
2 жыл бұрын
Hey… that’s a great idea! I’ll stick on a few self adhesive anti-skid pads. Thanks! 😎
@jeffard4590
Жыл бұрын
For everyone that is asleep! It is impossible to drill a hole at a perfect 90 degree angle without some sort of jig!!! I think it was a great idea and you can’t beat the price! Thanks for the tip!
@HacksbyDad
Жыл бұрын
Thanks! Much appreciated!
@mtlicq
2 ай бұрын
Thanks for the advice. When I build an outerspace rocket I'll use a jig.
@NeanderthalDogma
Ай бұрын
I just built mine have you statted@@mtlicq
@arkhamsfinest80
2 ай бұрын
We really gonna act like that jig didn't move while drilling?
@katingaman
Ай бұрын
Just glue 80 grit sandpaper underneath the jig or clamp it. This just a demo
@DessieTots
11 ай бұрын
I can still see daylight in the first butting up to the drill bit?
@HacksbyDad
11 ай бұрын
Yup! Not perfect, but good enough for most of my needs. I can’t drill anywhere near perpendicular without the jig. 😎
@milk_chemistry
11 ай бұрын
Bro you could have just made a drill guide with 1 piece of wood You over complicated this
@HacksbyDad
11 ай бұрын
Thanks! You’re right, but the other hole is too close to the corner and would interfere with larger drill bits. Also, adding the other pieces of wood made the rig more stable.
@jodyann77
3 жыл бұрын
I might be having a blond moment here LOL but what is the sense of this video? What is it used for? Thank you
@IMDunn-oy9cd
3 жыл бұрын
He’s made a guide so that he can ensure that he is drilling a straight hole.
@hmpp7013
9 ай бұрын
Too complicated for a simple job and the result is not that accurate.
@janverhave
3 жыл бұрын
It looks like a solution for a problem that doesn’t exist.
@HacksbyDad
3 жыл бұрын
I guess I might be one of the few who can’t drill a near perpendicular hole without a drill press. My attempts by eyeballing it with cordless drills are always way off the mark. 😎
@janverhave
3 жыл бұрын
@@HacksbyDad I’m not drilling perpendicular either which I notice when using a hammer drill in concrete. I have learned not to push to hard and let the drill do most of the work.
@HacksbyDad
3 жыл бұрын
@@janverhave Thanks! I'll keep that in mind the next time I'm working on something. 😎
@hickscorp
2 ай бұрын
When you're working with a piece through which you need a bolt to enter and exit perpendicalirily, this matters a lot. That's why press / column drills exist.
@jarjarium2539
3 жыл бұрын
Maybe just hold the drill perpendicular to your work 🤔
@HacksbyDad
3 жыл бұрын
LOL Believe me... I've tried so many times and failed miserably. I just don't have the eye to drill a hole close to perpendicular and need a jig. 😎
@Leblueskee
Жыл бұрын
@@HacksbyDad I don’t think anyone can do it by hand and make it perfect. Thanks for the idea
@filiux2486
3 жыл бұрын
Q tonteria
@junkie842
3 жыл бұрын
Joe Biden buys first one
@teeanahera8949
2 жыл бұрын
Trump invented it.
@mtlicq
2 ай бұрын
F J B ! & F J T
@golddivertycoon8973
3 жыл бұрын
Guess this why I am not a carpenter.....because this was a waste of time 😂😂😂
@HacksbyDad
3 жыл бұрын
LOL 👍
@DavidSaintBump
10 ай бұрын
Sounds like a you problem.
@cantstopme7607
3 жыл бұрын
Makes no sense
@HacksbyDad
3 жыл бұрын
It's a guide to drill holes perpendicular to the piece of wood. Without it... my holes are way off angle when I try to eyeball it. LOL 😎
Пікірлер: 36