Are we just going to ignore how cool that sanding block throw and return was?
@BradyHommel
Жыл бұрын
😂
@jt9498
19 күн бұрын
Well done! Excellent explanation and presentation.
@BradyHommel
18 күн бұрын
Appreciate that. Thank you!
@RusiGeorgiev
8 күн бұрын
Awesome video! Great job! Thanks for making it.
@BradyHommel
7 күн бұрын
Glad you liked it! Thanks for the comment
@danaschulz8441
27 күн бұрын
Good info on the back piece; makes assembly easy and being able to replace the bottom is a plus!
@BradyHommel
27 күн бұрын
For sure! Thank you
@michaelasorg6206
6 ай бұрын
The best tutorial out there. Just made 6 drawers after watching this. Thanks!
@BradyHommel
6 ай бұрын
That's awesome! Great to hear. Thank you
@topafkar
2 жыл бұрын
Good work 👍
@BradyHommel
2 жыл бұрын
Thank you!
@JS-rv3et
Жыл бұрын
@@BradyHommel what if my table saw doesn't have a guide bar/fence
@fredwickwire2502
Жыл бұрын
Love your channel. Glad I stumbled across your channel. Thanx for what u do. Looking forward to Retirement in a few months.
@BradyHommel
Жыл бұрын
Appreciate that! Congrats and Happy retirement
@Myrune1
Жыл бұрын
Excellent and no BS.
@BradyHommel
Жыл бұрын
Thanks!
@johnh4833
6 ай бұрын
Love the simplicity. If done properly, simple can look really good. I'm a notch above beginner and always love a good clear explanation. Great job.
@BradyHommel
6 ай бұрын
Appreciate that! Thanks for the comment
@DanielleRootes
2 жыл бұрын
This will come in handy for my van build! Thanks Brady!
@drive-channel1834
6 ай бұрын
That's a very good design. Seems quite simple and strong. And serviceable/repairable 👍
@BradyHommel
6 ай бұрын
Thanks!
@jonnyconnors2971
3 ай бұрын
you the MAN Brad Hommel
@BradyHommel
3 ай бұрын
Thanks!!
@davidchapamusicofficial
3 ай бұрын
This is the best video I have seen. Just the facts, no BS. Thanks for doing this video.
@BradyHommel
3 ай бұрын
Glad to hear that. Thanks!
@DavidBoston-rx2yi
29 күн бұрын
Brilliant
@BradyHommel
28 күн бұрын
Thanks!
@gwstubbs7046
Жыл бұрын
Good job on the drawer.
@kevinbowker2385
2 жыл бұрын
Great work and well explained. Thanks for sharing.
@BradyHommel
2 жыл бұрын
Appreciate that! Thank you for your comment!
@onehundreddoors5715
3 ай бұрын
Really great video man. Keeping it simple
@BradyHommel
3 ай бұрын
Thank you!
@SVGPRO
Жыл бұрын
This guy is a boss.
@lizmiddleton2382
5 ай бұрын
Great tutorial 👌 thanks 👍
@BradyHommel
5 ай бұрын
Your welcome!
@daleharrison6514
Жыл бұрын
So glad I found your channel! Keep ‘em comin!!
@BradyHommel
Жыл бұрын
Thanks a lot Dale!
@daleharrison6514
Жыл бұрын
Do you think a portable table saw would be big enough for this and the drawer?
@robinson12db
2 жыл бұрын
Great vide
@BradyHommel
2 жыл бұрын
Thanks a lot!
@glory3670
Жыл бұрын
Thanks!
@BradyHommel
Жыл бұрын
You're welcome!
@Someone-tn8ur
8 күн бұрын
Thank you for the video. I'm going to be tackling this project real soon and this looks very helpful. One question though, why do you cut off the back piece rather than cut a groove (you call it dado)? Seems like you could slide the bottom board in for extra support this way. Edit. You'd have to put the back piece on last that way, maybe that'd be a hassle to line up.
@BradyHommel
7 күн бұрын
This way if the bottom panel even gets damaged you can unscrew the panel and slide it out to replace it. But you can absolutely put the same groove in the back piece as well and build it that way. I do that too
@Brian18741
2 жыл бұрын
Great video
@BradyHommel
2 жыл бұрын
Thank you!
@elbanti
2 ай бұрын
“I love this thing, it’s a life saver” * Throws it like he hates it 😂
@BradyHommel
2 ай бұрын
Haha
@robertstewart5685
10 ай бұрын
After 30 years of furniture building I need to start making videos on how I do things,
@MrKYT-gb8gs
3 ай бұрын
What is it that he did wrong?
@robertstewart5685
3 ай бұрын
@@MrKYT-gb8gs no mortises, He’s putting stress on his screws, a couple more set up’s on the table saw and He would have been done
@Kgrhj
2 ай бұрын
I’d be your apprentice. Send me your email so i can ask questions! lol
@jamesondenhartog8109
2 ай бұрын
@@robertstewart5685 what is it they about the ways to skin a cat?
@azul8811
2 ай бұрын
Please do.
@Danthorn76
7 ай бұрын
So question, when you knocked an eighth off the end of the drawer bottom. Was that because you book matched the sides making the sides width a hair shy of an actual 3/4 inch and would leave a small lip on the outside of the box if you didn't take off that extra eighth of an inch?
@hendrikvanleeuwen9110
4 ай бұрын
I think it is to make the bottom of the drawer replacable and easier to fit the first time.
@nonplayablecharacter4815
Жыл бұрын
Nice!!
@BradyHommel
Жыл бұрын
Thank you!
@Blackwido88
5 ай бұрын
The one thing I wanted to see, you skipped 😂. Drawer slides
@BradyHommel
5 ай бұрын
Haha. Do a quick search for them. There should be plenty of tutorials on youtube for those.
@joeltower5964
Жыл бұрын
Ha! 777th like! Great video! Easy to follow
@bleckybob
8 ай бұрын
Why wouldn’t you dado the back piece, insert the bottom, and then glue and screw in the back piece?
@BradyHommel
8 ай бұрын
Because the way I did it the drawer bottom is removable if it ever gets damaged and easily replaced
@-_-John-_-
7 ай бұрын
✅
@9catlover
Жыл бұрын
i need to replace my draw. this is perfect but gonna try and use pallet wood because i got loads free
@BradyHommel
Жыл бұрын
Pallet wood would work great! Free is even better!
@johnstarkie9948
Ай бұрын
Drawer.
@gailjohnson3544
Жыл бұрын
Nice work but too fast for a Beginner
@JS-rv3et
Жыл бұрын
pro tip. watch it again. pro gamer move. pause it
@ZedLeppelin1989
Ай бұрын
Imperial measuring system is so fucking rediculous
Пікірлер: 73