Voltage Devider:
1 - Mosfet transistor
1 - 10kOhm resistor
2 - 1 diod
3 - 1 potensiometer 0-5kOhm only to find out if you need to change the value on the first resistor. This adjustment is necessary to find out when the transistor will give enough power so the relay will be activated.
All components comes from the arduio starter kit.
Heat exchanger from a Vw e-up 2014- 5kW at 350V
Circulation pump from an fossil Auxiliary heater.
1 - High voltage DC relay.
Why a relay?? At the time when i was building this i did not know how to separate the low and high voltage system. When using a transistor you need to have a common ground. And thats something that i definitely not want.
So therefore it is a relay based control system.
Volkswagen golf, citystromer was originally fitted with an electric motor together with a five-speed gear box. Sadly the original motor was gone for many years ago and that’s why I will try to restore the old feeling of the car, but with a new motor and a modern charging system instead, so it will be much more usable with today’s standard. I really hope that you like this video and please subscribe if you want to see more of them.
Thank you so much for watching!☺️
Here is some links to the other videos on this project:
I bought a VW golf citystromer
• I bought a VW Golf MK2...
Part 1: VW Mk2 Citystromer, All Electric, Lithium Conversion, Audi e tron 55 Battery Modules
• VW Mk2 Citystromer, Al...
Part 2: • VW Golf Mk2 Citystrome...
Lead acid to lithium: • VW Golf Mk2 Citystrome...
Range test: • Range test, Electric V...
• All electric Vw golf M...
More info here: www.topgear.co...
Негізгі бет Diy electric car heating system with some simple components from my arduino starter kit.
Пікірлер: 31