I would like to thank you for posting on your 2010 f150!! You are the only one to do anything on our year of truck. If you have any more it would be greatly appreciated. I was able to shut stuff off and I thank you for that!!
@RandomAutomotive
Жыл бұрын
I no longer have the truck, but I do have more videos of it on the channel! I may even have some in the archive I haven't posted. If I do, I'll post them!
@johngirimonte7818
2 жыл бұрын
Finally found what I needed, thank you very much for executing this video.
@RandomAutomotive
2 жыл бұрын
Yessir! If you enjoyed it and haven't already, consider subscribing 🤘
@mathieuduff
2 ай бұрын
You rock man! It works here in canada with f150 fx4 2013 🤟😈
@maxdatsun
19 күн бұрын
Great video! Got stuck though, GEM/SJB is missing. What could I do now?
@jasonking8671
Ай бұрын
Awesome. I've been looking to do this for years, I have a canadian xlt. Just wondering where the program comes from ? Do you have to download it or does it pop up on the laptop when you plug in the scanner? I'm not good with computers lol. Thanks
@RandomAutomotive
Ай бұрын
All good! You have to download, the link is in the description!
@jonduppong1527
5 ай бұрын
I completed these steps on my 2012 f150. All settings in forscan show that DRL is disabled but they are not. On all the time. Any idea of a work around?
@off-roadprojectsandfun6868
7 ай бұрын
Would this program reset back to normal if you unhook the battery, or is it permanent as long as the computer works?
@RandomAutomotive
7 ай бұрын
I never actually tested the theory. But, it rewrites to the system memory - so my guess would be it stays 👍🏻
@enriqueavendano344
2 жыл бұрын
Is there any way to do this without a scanner or computer? Any fuse that can be taken out?
@RandomAutomotive
2 жыл бұрын
On very few older cars it is a possibility - on anything modern (2007+) No. The DRL is controlled by the ECM, pulling the fuse would kill the headlamps altogether which you do not want to do.
@danielortiz1180
Жыл бұрын
I have a 2014 f150 fx4 3.5 ecoboost i don’t see the gem sjb, what else can I look for to turn off my drl when I shift out of park, Please Help.
@RandomAutomotive
Жыл бұрын
Did you do the 2 month trial subscription?
@tj6576
9 ай бұрын
I had to go under BdyCM in my truck. Disable the DRL, DRL including parking lamps, and for daytime running lights type select none.
@neilmashburn1984
Жыл бұрын
Do you have to have the extended license to do this? I clip on the micro chip and everything pops up but no matter what i click on when i try to run it, it just keeps popping up need extended license to use this function
@RandomAutomotive
Жыл бұрын
This did work with the license shown, that may have changed since then though.
@nizardawood8198
Жыл бұрын
My Ford explorer 2017 Auto lights it's always on and it's doesn't turn off automatically during sunny days this happened when I changed some things with forscan any help please
@RandomAutomotive
Жыл бұрын
If this process doesn't work (meaning DRL isn't the issue). It may be a bad connection to your ambient light sensor, or something is blocking it. The sensor (usually found on the top of the dash) is what tells the truck when it's dark/daylight. That may need to be looked at or replaced.
@firedawg22000
Жыл бұрын
Do you know if this will work on 2021 F350?
@RandomAutomotive
Жыл бұрын
This should, I’ve heard success with 2022’s. Thank you for watching!
@s.u.e.8672
9 ай бұрын
Does this work for a 2009 f150
@tomeeb
Жыл бұрын
How can i do this on a 2013 escape? Tried but can't find drl
@RandomAutomotive
Жыл бұрын
It should be there! Do you have the HS MS CAN switch set correctly?
@tomeeb
Жыл бұрын
@Random Automotive i do, no options for lights. I have a Canadian version so they are always on even in park and e brake up
@tomeeb
Жыл бұрын
Gmshb doesn't come up for me
@RandomAutomotive
Жыл бұрын
@T. C.B I'm wondering if there's a difference on canada built vehicles since it's mandatory there (I think lol).
@timberwolf7341
10 ай бұрын
Hi. Will this definitely work on a Canadian 2011 Ranger? The DRLs come on when you turn the key on, as in, they come on in PARK, not just in D/R. This is very important to me, 'cuz it's the determining factor in whether I buy this truck or not to replace my '05 that an idiot totaled for me! Thanks!
@timberwolf7341
10 ай бұрын
Oh, I HATE DRLs, so if there's even a chance that this won't permanently disable them, I'm going to play it safe and buy a different 2010/2011. Thanks again.
@RandomAutomotive
10 ай бұрын
Rangers are a different animal. I’d be inclined to say it could not work, but I’m not for sure. Here’s why: Most Rangers even from 2010/2011 (last models) use the same PCM that Rangers from 90s and 2000s. I have a 2000, it’s very limited to what you can control/turn off.
@timberwolf7341
10 ай бұрын
@@RandomAutomotive Hi! Thanks for the response. Yeah, I'm all over the Ranger forums and the only posts that are definitive and by highly credible people are the ones that say it can't be done. The few posts that say it can be done don't have any objective evidence of success to back them up. However, the (really cool) sales guy in Portland with the Canuck Truck is 1.5 hrs into the process of using Forscan, etc., to kill those DRLs as I'm typing this. He started at 6pm, so here in, what, as long as it takes to git-'er-done OR finally give up in frustration after exhausting every permutation he can think of, we will know "yea or nay" conclusively. I'll conclude this "real time" report in a few.
@RandomAutomotive
10 ай бұрын
For sure, let me know!
@timberwolf7341
10 ай бұрын
Well, he didn't get any results, so his dealership mechanic is going to help him out tomorrow. The saga continues ... *grins*
@nertobimb3566
2 жыл бұрын
Buenas tardes Seria igual en una escape 2013
@RandomAutomotive
2 жыл бұрын
Buenas noches mi amigo. Perdóname, mi español no es bueno. Sí, esto también debería funcionar en un Ford Escape 2013
@nertobimb3566
2 жыл бұрын
Tu español es muy bueno. Mi escape tiene drl todo el dia prendidas y no se pueden apagar ni con el switch.y quiero apagarlas con forscan
@RandomAutomotive
2 жыл бұрын
@@nertobimb3566 Te entendí. Esto debería funcionar, avísame con seguridad si es así. Además, ¡suscríbete al canal para más!
@jaimelopez5470
Жыл бұрын
How to enable?
@RandomAutomotive
Жыл бұрын
If equipped you can do this exact same process as mentioned in the video, except where we change the setting toward the end from 1- enabled to 0- disabled. You would do the opposite from 0-disabled to 1-enabled
Пікірлер: 41