Really love the channel. It gets the juices flowing like no other channel.
@Silverbackra
3 жыл бұрын
such a simple and genius idea. excellent I will be making this today
@robertstephens6884
6 жыл бұрын
Coors Light as a "material" is what put me over the edge to give a thumbs up. Nice work.
@Aro800
6 жыл бұрын
Great idea. Now I just need a garage.
@beecherocus8166
7 жыл бұрын
Quick update or Upgrade........ For the holders holding my larger rods/reels I did decide to cut a 3/4" slot in the PVC couplings on the rod tip end. This slot was cut at around the 11 o'clock position and allows a much easier way to put the larger rods into place without risking guide damage. Now its just slip the butt of the rod into one of the PVC couplings and drop the rod tip end in the other.. Oh yeah, if you decide to do this cut the slots while the PVC is mounted to the pine boards, cutting those suckers on a work bench without a vise is next to impossible..
@andrewmolina1617
6 жыл бұрын
Thanks for video update!
@njtech2005
4 жыл бұрын
Thank you for posting this. Very helpful and some great ideas!
@ronbailey2486
4 жыл бұрын
Yep great idea I'm definitely doing it thanks for the video
@petenunnery2292
5 жыл бұрын
Man, this is really awesome sir. Great video.
@roldanh9
4 жыл бұрын
How did you secure the couplings to the board?
@johnnyrotten200
5 жыл бұрын
Good work, friend. Thanks for posting.
@olhesty2196
4 жыл бұрын
Right on brother you did a good job!
@chuckcrabbe3253
5 жыл бұрын
Awesome idea man. Looks good
@Fed-Up_Hallelujah
4 жыл бұрын
Very Cool, I will be doing this!
@bobt471
5 жыл бұрын
Nice job for first video . Also creative content ! Cheers
@timk9700
6 жыл бұрын
OUTSTANDING........... Thanks Tim
@andrewmolina1617
6 жыл бұрын
Great video!
@toddocus308
3 жыл бұрын
31 THOUSAND views!?!???!??! I never thought this would garner that much attention...... Thanks for the views, maybe I will post a few more videos of things I've come up with around the house.
@shepardfamily8278
3 жыл бұрын
Have the rods started to show wear at the spot that they rotate in the pipes?
@jamesnavarro5294
5 жыл бұрын
Brilliant!
@vincesato7144
5 жыл бұрын
Great idea!!! Thanks
@radareddy123
4 жыл бұрын
Very Nice!
@lynnallison9885
5 жыл бұрын
Thanks josh
@jw5969
4 жыл бұрын
Hey love this idea . All the way from Dublin Ireland 🇮🇪.. only 1 question is wit it work with GUINNESS 🍺🍺😂
@manuelmiranda3422
6 жыл бұрын
Excellent idea, thanks.
@companthrax
5 жыл бұрын
Nice man thanks ...
@aanadv
3 жыл бұрын
Good👍...come here mr
@epicgalaxydrif1897
6 жыл бұрын
Would added weight messes the motor up?
@JeannyCollazo
3 жыл бұрын
Was wondering the same thing
@johnjmaio
6 жыл бұрын
genius
@chrisrasmussen5018
4 жыл бұрын
Something that stupidly simple would have saved my 2 best rods.
@GWBarker
5 жыл бұрын
Doing this.
@andymeresse6930
5 жыл бұрын
Really stupid question, but how did you get the wood into those channels? I've cut my boards down, but they are too long to rotate into place.
@toddocus308
5 жыл бұрын
I just cut them down so they would slide in at an angle. It took a few times to get it just right, once I got it to fit I just replicated the measurement.
@vincesato7144
5 жыл бұрын
How did u attach the wood to the door?
@pappaclutch3266
5 жыл бұрын
Lots of wood glue
@codyarnold1411
4 жыл бұрын
Watch the video he shows how he screwed it in.
@vincesato7144
5 жыл бұрын
Ok sorry I rewatched and saw how to do it
@chadjones2968
6 жыл бұрын
How did you attach the PVC couplings to the 1x4’s?
@toddocus308
6 жыл бұрын
Chad Jones 3/8 drywall screws. I predrilled the first couple and used pan head screws but that was a pain. I found that the dry wall screws were pointed and sharp enough to work without needing to predrilled.
@chadjones2968
6 жыл бұрын
Todd Ocus Todd Ocus Thanks for the quick response. I guess my question was a little vague. What I meant was... what method did you use to actually screw the drywall screws into the couplings?. Did you install them from the back? I just don’t see any good angle to get to the screw head with your driver.
@toddocus308
6 жыл бұрын
Chad Jones I screwed them at an angle. The rods are either laying in the bottom of the coupling when the door is closed or the outward portion of the coupling when the the door is open and overhead. Considering this the screw heads never come in contact with the rods.
@chadjones2968
6 жыл бұрын
Todd Ocus Ok great. Your idea is an awesome one that I would’ve never thought of. Thanks for sharing your knowledge. 👍
@venetogardens
5 жыл бұрын
@@toddocus308Your build is nice. I would drill a 1/2 or so hole in the center of the plastic coupling and then use it to put the screw straight through into the wood.
Пікірлер: 45