DIY Goat Milking Stand for only $30! We purchased a doe in milk and needed a milking stand fast. With just a couple 2x4's and a scrap piece of plywood we built our first milking stand.
Dimensions:
Back legs- 24'' (2)
Front legs- 48'' (24'' from base to ground & 24'' from base up) (2)
Base frame- 24'' (2) by 48'' (2)
Center Base support- 24'' (1)
Neck squeeze- 48'' (2)
Squeeze braces- 24'' (2)
Leg braces- 12''-15'' with 45 degree angle (4)
Supplies:
6 - 2x4's (recommend getting an extra 2x4 incase of mistakes)
1- 24'' x 48'' piece of plywood 1/4in is fine
1- 6'' hex-bolt, nut, & 2 washers
1- hanging feed dish
Aprox- (30) 2.5'' wood screws
Негізгі бет Ойын-сауық DIY Goat Milking Stand
Пікірлер: 19