✩✩Links to the items I use in this video along with more info located below - check it! Purchasing your items from my links helps me do what I do and create more content - Your help is appreciated!✩✩
STOCK JET ON THE 2ND GEN PREDATOR 3500 (OIL DOOR ON THE OPPOSITE SIDE) IS A #82. IN THE 2ND GEN, UNLESS YOU ARE HAVING FOULING PROBLEMS OR, IF AT ALTITUDE - BUY A #78 AND SEE HOW THAT GOES. OTHERWISE, DO NOT CHANGE THE JET ON THE 2ND GEN.
BUY DIFFERENT JETS FOR THE PREDATOR 3500 OR VARIANTS HERE:
ebay.us/GzV3Mk
STA-BIL FUEL STABILIZER! IF YOU STORE YOUR GEN WITH GAS IN IT, THIS IS A MUST! (not really needed with ethanol free fuel)
amzn.to/3cGW4TZ
In this video, I resolve a super common issue with the predator 3500 inverter generator... a very rich running condition which clogs the spark arrestor and fouls plugs rather easily. Not to mention, uses more fuel than it needs.
For my application, it seems a #68 jet did the trick. Plug looked perfect, very slightly on the lean side under a nearly 100% load / 24.5A out of the continuous rated 25A output. This was at 1100ft altitude in Arizona / around 60F. I feel a 72 would be better if the gen was always run at lower altitude.
Most of the time, my gen is at 5-7K feet. While it ran at higher altitudes, it would only start on the run setting and really struggled on the start setting which is technically choke. So I would just start it in the run position but ran super rich. Luckily - it never skipped a beat and kept us powered when we needed it for going on 2 years now! And here in Phoenix at 1100ft, it still ran rich! You could smell it anytime it was running and plug was always black. The case is so well sealed on these... the stock jet just provides too much fuel and my small case mod (holes drilled) did not correct this.
Looking forward to camping season and seeing how the gen runs in the mountains now!
I will also continue to monitor this setup and note any corrections here. If you are at lower altitude / higher temps and such I would recommend a #72 jet. But for now... for me... the #68 was the ticket.
I wanted to make one more note... 2 years of running this gen and letting it sit for weeks to months at a time and the bowl on the carb was spotless! Sta-bil fuel stabilizer for the win! USE IT.
This covers any generator running a honda or honda clone hemi motor such as..
- Echo Bear Cat IG3500
- Powerhorse LC3500i
- BE i3500L
- Loncin LC3500i
- Atlas Copco P3500i
- JET JIN3500E
- DR PRO 3500i
- And of course the much loved Predator 3500
(Probably 10 other private labels too..)
✩ All Mr. Garage videos are for educational, inspirational and DIY purposes.
All items featured in my videos are purchased at normal prices and not provided to me or discounted in exchange for any services or features. I do all I can to give my experience and opinions to you to help you learn, form ideas or generate your own opinions.
✩ The legal:
Mr. Garage is a participant in the Amazon Services LLC Associates Program, an affiliate-advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon.com.
Mr. Garage is a participant in the EBay Affiliates Program, an affiliate-advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Ebay.com
FTC Disclosure Statement: Some links on this KZitem channel may be affiliate links. We may get paid if you buy something or take an action after clicking one of these. As an Amazon Associate, I earn from qualifying purchases. As an EBay Affiliate, I earn from qualifying purchases.
PLEASE - DO YOUR RESEARCH before making a decision based on information you find on KZitem, or anywhere else when it comes to anything you do, the environment, or your safety and sanity. Due to factors beyond the control of Mr. Garage, Mr. Garage assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this video or any of the other Mr. Garage videos. Mr. Garage recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and respiratory protective devices when working on anything using tools or devices
Негізгі бет DIY GUIDE - REJETTING THE PREDATOR 3500 INVERTER GENERATOR! RESOLVES A COMMON SUPER RICH CONDITION
No video
Пікірлер: 260