00:35 Type 1 Simple version production
01:51 Type 2 Production of magnetic force adjustment function
08:28 Type 2 demonstration (how to use)
09:50 Tips for setting magnetic force
10:12 Demonstration of Type 1 (how to use)
10:50 Additional matters (additional information)
We will introduce two jigs for accurately cutting materials using hand saws, which are indispensable for woodworking.
The best woodworking tools.
type 1
This is a model that prioritizes simplicity.
It only takes about 5 minutes, so even beginners can easily make it.
type 2
This model allows you to adjust the magnetic force in the simplest way possible.
Since the magnetic force can be adjusted independently for each magnet, you can achieve the ideal settings that suit your preferences at a high level.
Wouldn't this solve all the problems of magnets being too strong and tiring or too weak to use?
Although the main body shape is simple, it is a good idea to customize it to suit your intended use. In the future, we plan to develop even more advanced models. Please look forward to it.
I have never seen a saw guide with this adjustment function on the internet, including KZitem. This is the best feature, so please use it as a reference.
others
● How to re-upholster an antibacterial cutting board
Cut the new plate a little larger, peel off the plate you want to replace, and copy the hole positions to the new plate. I think it would be a good idea to stack two sheets and pre-drill the holes.
Align the holes with the holes on the base and paste, then cut off the excess. I think there will be fewer mistakes because there is enough room even if the holes are slightly misaligned.
● About painting the wood
The two types of paint used are both water-based varnishes. The first color I painted was Daiso's "Keyaki Color", and I first applied a light color undercoat. This prevents the color from reversing due to differences in suction, which occurs when adding dark colors, and the light and shade at this time serves as the basic wood grain standard.
The next thing I painted was Celia's Maple Color, which is a paint with a unique viscosity. Water-based varnish tends to make paint uneven, so I use a bamboo brush to spread it efficiently. This is one of the good techniques for quick application.
● Setting method
When cutting with a saw, the part that vibrates the most is the grip.
This is where it is most likely to separate, so by setting the magnetic force of the nearest magnet to its maximum value, you can suppress vibration to the maximum extent possible. In addition, all magnets can be adjusted instantly even during cutting, allowing flexible and advanced settings to suit the situation. This is highly functional and comparable to professional equipment.
I think it would be better for you to choose the size etc. according to your own needs, but if you have a request for drawings etc., I will be able to provide them.
Please rate highly and subscribe to the channel.
Thank you for watching.
Language translation uses Google's automatic translation service. I apologize if it is difficult to read.
Негізгі бет Ғылым және технология (DIY) Hand saw guide with magnetic adjustment. Two useful guides. The pinnacle of magnetic methods.
Пікірлер: 12