Welcome back to the Gator Overland channel. It's time to get your recreational or household equipment stored up and out of the way. In today's episode I explain how to create your own hoist storage system. I designed my system for 200 lbs, but can be capable of nearly 400 lbs by upgrading a single pulley (as explained in the video). Feel free to contact me via social media or email should you have any questions about your build.
**DISCLAIMER : PLEASE WORK SAFE AND AT YOUR OWN RISK**
Video Timeline
Intro- 0:00
Opening- 1:03
Tools- 2:07
Materials- 4:09
Locating the Hoist System- 6:33
Threshold Height Confirmation- 7:07
Stud Finding 101- 8:14
Hoist Terminology- 9:39
Ceiling Brace- 10:09
Pulley Junction Block- 11:16
Load Bridle- 11:51
Load Boards- 12:45
Direction Pulley & Winch- 14:27
Explaining Mechanical Advantage- 15:53
Load Board Disassembly- 21:23
Rooftop Tent Prep- 22:49
Fastening Load Boards- 25:33
Connect Hoist- 26:12
Raise The "ROOF"Nest- 26:38
Connect Safety Chain- 27:20
Closing- 27:53
Dropbox link for construction info and reference photos:
www.dropbox.com/sh/vz6r165mo8...
DIY hoist consolidated materials list (including amazon affiliated links)
(2-3ea.) 36”x1 1/2” perforated square tubing amzn.to/3yoPDv7
(3) 2x6x8ft boards (hardware store or lumber yard)
(12) 3/8”x3” long lag bolts (to ceiling joists) amzn.to/3fzoixs
(2-3) 3/8”x2” long lag bolts (winch to wall stud) amzn.to/3fuGNU3
(9) 3/8”x4” long eye bolts and nut amzn.to/34bWwlL
(33) 3/8” washers get 10 extra just in case amzn.to/3eZqBLd
(8) 1/4”x 1 1/2” long lag bolts (pulleys to load boards) amzn.to/3f33Lm2
(12) 1/4 x 1” long lag bolts (pulleys to junction block) amzn.to/3wgFb6Y
(1) 5/16” 2-3” lag eye bolt (mounted to wall stud near ceiling for winch hook) amzn.to/3v6WLdE
(5) 420# cap. swivel 3/8” rope pulleys amzn.to/3v2lmAb
(8-9*) 100# cap. Stationary 3/8” rope pulleys *you may increase the capacity of the direction pulley to winch for 200lbs+ loads (400lb max load, unless you increase pulley capacity on load boards, be safe) amzn.to/2QySbWv
(1) 5/16” quick link amzn.to/3ow6Wpk
(4) 160# spring clips amzn.to/2Scjo1p
(8) 130# spring clips amzn.to/3whngx0
(50ft+) 3/8” diamond braid poly rope 100lbs+ cap. amzn.to/3hAwtfT
(8ft+) 200lb+ cap. Safety chain (swing set chain) (check hardware stores)
(4) ubolt 5/16” wire rope clips (use at bridle for adjusting load board levelness) amzn.to/3tZlyPf
(4) 1/4”-3/8” rope clamps (use for loop end attached to ceiling brace 160# spring clips) amzn.to/3wdjpku
(1) winch (worm gear, trailer, electric, etc.) (check harbor freight)
(1) *optional* winch offset bracket for using trailer winch on the wall. amzn.to/3f6Sgdz
Contact Info:
Facebook- / jkhartel3
Instagram- @gator_overland
Email- JKHartel3@gmail.com
For other great Jeep, Overlanding, and Off-Road content, see the channels I follow below.
@TrailRecon
@TheStradman
@JKGearandGadgets
@venture4wd
@DirtLifestyle
@Ronny_Dahl
@TFLoffroad
@TFLtruck
@LawrenceTolman
@BuiltForDirt
@c130aviator
@LiteBrite
@LifestyleOverland
@JLLIFEOFFROAD
@wayalife
@OverlandishAdventures
@bayoudragons
Негізгі бет Тәжірибелік нұсқаулар және стиль DIY Hoist System (Rooftop Tents, Kayaks, Jeep Tops, Ladders, etc.)
Пікірлер: 362