Good setup, Andy, looking forward to seeing some run-time on the creek, minor advisory warning it's a potential cheesegrater for your fingertips. Effective and efficient!
@andypandyAU.6669
3 ай бұрын
Good call!, I usually wear gloves. It should do the job. Thanks for dropping by , regards Andy
@AMProspecting
3 ай бұрын
Great looking unit my friend...looking forward to seeing the test run!
@andypandyAU.6669
3 ай бұрын
Me too Mark. We have had a dry summer and autumn. Now mid winter and still a dry one, not enough flow. I will have to build a dam! It will happen. Thanks for watching my friend
@dataglasses
3 ай бұрын
I agree .......... who needs a safety guard! I found a wire screen security door yesterday, might be able to use it? All the cool kids have a forward classifier!
@andypandyAU.6669
3 ай бұрын
Well I thought I would have a go at making it. Cheers buddy
@theGoldWolf
3 ай бұрын
@@andypandyAU.6669 I got an old vid with basically the same design, it works, my punch plate was actually from electrical cable tray ....... from a dumpster! Cheers
@andypandyAU.6669
3 ай бұрын
@@theGoldWolf what ever you can use is my philosophy, if you don't have to by it, you're ahead straight away! Thanks for watching and especially commenting. Regards Andy
@dataglasses
3 ай бұрын
@@andypandyAU.6669 Well now you're one of the cool kids!
@andypandyAU.6669
3 ай бұрын
@@dataglasses never been a cool kid!
@GSProspecting
3 ай бұрын
That's going to work out great indeed fam 💪🤠. Great job all around. Keep on having fun getting that Au and living the dream. Gold Squad Out 🤠
@andypandyAU.6669
3 ай бұрын
Thanks 👍
@piratescrew1869
3 ай бұрын
I’m doing the same thing with a spray bar attachment. Love ya work Andy!!
@andypandyAU.6669
3 ай бұрын
Gotta have a go. Big thing is need enough flow, and at the moment not a lot around. Need some rain! Thanks for watching and especially commenting James
@ShannonChambers-mj7nw
3 ай бұрын
Well done Andy looks like it will work a treat 👍
@andypandyAU.6669
3 ай бұрын
Hope so, cheap enough too. Thanks Shannon
@anothergoldprospector
3 ай бұрын
Nice work mate just like a bought one
@andypandyAU.6669
3 ай бұрын
@@anothergoldprospector can only try it out, if it works it works! Cheer Andrew
@frenchys_prospecting
3 ай бұрын
This is the good stuff we're here for. Nice work, Andy.
@andypandyAU.6669
3 ай бұрын
Thanks mate, when are you back in the frozen part of the country? I have a jar of dirt for ya (& a sluice)
@frenchys_prospecting
3 ай бұрын
@@andypandyAU.6669 9 days. I'm looking forward to panning that muck out
@josephknowlton7246
3 ай бұрын
Liked, shared and commented 🍻🤴🏻🗽 5:36
@andypandyAU.6669
3 ай бұрын
No expenses spared here, cheers Joseph 👍
@josephknowlton7246
3 ай бұрын
@@andypandyAU.6669 lol. I like the way u work. U use the free discarded stuff. And top prop’s! I’ve never yet seen u duct tape something. I hate duct tape. There’s a edict of building stuff. There’s a time and a place for every fastener out there 🧷. But not duct tape. 🍻🤴🏻🗽
@dylanjames4537
Ай бұрын
Mad idea mate and hands on stuff is what im about, subbed.
@andypandyAU.6669
Ай бұрын
Welcome aboard , it has been a game changer! Really fast processing. I love it, cheers Dylan
@MurrayRiversGoldAdventures
3 ай бұрын
You could even add some 90°angle line to the top & set it into a V that way the rock fall to the side of the Sluice
@andypandyAU.6669
3 ай бұрын
A project in testing, progress. See how it goes and it can always inproved. Cheers Victor
@cliffw6031
3 ай бұрын
That will do the job fine. Hope to get out and have a go during my next R&R. Maybe Tibooburra or Dunolly area, weather depending.
@andypandyAU.6669
3 ай бұрын
Good luck mate
@mohammednovalija
3 ай бұрын
I myself would have had a go at getting the compressor going using the scrap sluice for parts
@andypandyAU.6669
3 ай бұрын
Compressor is dead, plus I want to make a bigger trommel out of the dead Compressors for a friend to use on his private property with a gold bearing creek. A flow through design. Cheers
@mohammednovalija
3 ай бұрын
@@andypandyAU.6669 That what you making for your mate , would an LPG Tank from a vehicle work , or is there something special about the parts from an air compressor ?
@andypandyAU.6669
3 ай бұрын
@@mohammednovalija nothing special, just free and I can do the welding and fabrication required
@cardmansales9376
2 ай бұрын
nice sluce :)
@andypandyAU.6669
2 ай бұрын
If it works, its good 👍 If it doesn't, a redesign will happen. But after testing its okay for the meantime
@cardmansales9376
2 ай бұрын
@@andypandyAU.6669 looks like it should be great
@cardmansales9376
2 ай бұрын
@@andypandyAU.6669 might wanna put a bar at an angle on top to sluff off the junk rock
@andypandyAU.6669
2 ай бұрын
@@cardmansales9376 it is a work in progress, always evolving, refining the process. Thanks for your thoughts and com
Пікірлер: 43