車中泊用のスピーカーを作った経験を生かして 家用のスピーカーを作ってみました。 木材の厚みを増やして、スピーカーユニットをよくしてみたところ、最高の音質になりました。 コメントや評価を頂けると励みになります。 不明点などあればお気軽にコメント頂ければと思います。 DIYの再生リスト kzitem.info/door/PLyte-Jr54hh--nTg8ou9qZ1PQJyW2KyxX With the experience of making speakers for overnight stays in the car I made speakers for home use. I increased the thickness of the wood and made the speaker units better and they have the best sound quality. I would be encouraged if you could give me your comments and evaluations. Please feel free to comment if you have any unclear points. DIY playlist kzitem.info/door/PLyte-Jr54hh--nTg8ou9qZ1PQJyW2KyxX
@RIPTECmedia
5 ай бұрын
Saya menonton video ini sampai selesai dan saya terkesan dengan hasilnya yang luar biasa..👍
@go_dvij
Жыл бұрын
Прекрасная работа. Небольшое замечание: 10:37 при сверлении отверстий деревянная стружка может попасть в промежуток между конусом и диффузором. Предлагаю сначала наметить отверстия карандашом, затем достать динамик, просверлить отверстия, установить динамик, закрутить болты.
@gontadiy
Жыл бұрын
Большое спасибо! Вы правы. Я сделал это после, во время использования пылесборника. Большое спасибо за совет.
@ronaldoalexandre4803
6 ай бұрын
👍🏾👍🏾👍🏾show ,muito bonito seu trabalho com madeira. Continue assim .🇧🇷
@gontadiy
6 ай бұрын
Obrigado! Espero que isto seja útil.
@colinyoung5690
10 ай бұрын
Thanks so much for sharing this. I love music, all types. I have bought a great many items over the years, and during Covid I bought a Naim Nova for convenience and then started to look at speakers. I was horrified by the lack of build quality of so called quality speakers. I sent 3 pairs of Focal’s back (shockingly bad) B&Ws felt a little flimsy and dull, Paradigm sounded good and was better built but was damaged on receipt and the dealer irritated me so I ended up with Sonus Faber. These are the ones built in Italy (not China) the build is better but not perfect but I do love the warm (a little coloured) sound. To be honest my favourite piece of equipment is a 33 year old Pioneer A400 amp. At the time I narrowed the amps down to the A400 and a Nakamichi (can’t remember the model) however the Nak was 3 times the price (which I couldn’t afford) for perhaps marginally better sound. I never have regretted buying the A400. What you’ve created looks wonderful, I’d love to hear them. What drivers did you use?
@gontadiy
10 ай бұрын
Thank you for sharing this valuable information! I will refer to it. What do you mean by "driver"? I have not particularly tinkered with the software side.
@colinyoung5690
10 ай бұрын
@gontadiy The driver is the device that converts power from the amp into mechanical sound - The diaphragm, cone, voice coil etc.
@djmaster502
Жыл бұрын
excelente video puedes indicarme el grososr d la madera y como poder fabricar los colgantes de las bocinas por favor , de antemano muchas gracias saludos desde Guatemala.
@江田島平八-w2j
21 сағат бұрын
自作?!インチキハイエンドミニミニスピーカーの工場みたい。ゴンータムンド。
@ErCanEverything
Жыл бұрын
Good work my Friend🙂🤝🤝🤝
@gontadiy
Жыл бұрын
Thank you very much! I hope this is helpful.
@alfoet5596
Жыл бұрын
Fiquei encantado com seu trabalho. Sou louco por caixas de som e seu trabalho é muito profissional. Parabéns!
@gontadiy
Жыл бұрын
Obrigado! Fico muito feliz por ouvi-lo dizer isso. Espero que ache o vídeo útil.
@Doogle136
Жыл бұрын
Thank you so much for the informative and well crafted video. I am going to follow your example and use all the same ‘ingredients’. It will be my second DIY speaker build- back then I was 16. Many, many decades have passed since but the urge remains. Arigatō from Canada🙏
@gontadiy
Жыл бұрын
Thank you for your comment from Canada. I can very much relate to being very shocked when you make a speaker. Please try again a second time!
@LPGM007
Жыл бұрын
The frequency response is from the middle of the last century, but the sound is AMAZING. This is clickbait.
Love this video. I’ve been making wooden speaker cabinets for over 15 years. I use cellulose based drivers and tonewood. Have you tried coating the wood with dissolved minerals such as sugar, salt, Epsom salts and other water soluble minerals? This coating allows the wood to resonate evenly across frequencies and minimises the need for sound absorbing materials. You can also add a layer of colophony dissolved in turpentine substitute which has acoustic properties and aesthetic ones too.
@gontadiy
Жыл бұрын
Thank you very much. I am very glad to hear a veteran of homebrew speakers say that. Thanks also for the advice. After creation, I applied poaching wax. I think it has increased the strength and improved the sound. I have never heard of water soluble mineral coating before. It sounds like a very good thing to do. Thank you for sharing the information. I will refer to it.
@jimwilliams8229
9 сағат бұрын
Ditch that sander. Invest in some card scrapers. Check the phase of your speakers ( if you made a pair) a double A or triple A battery will show you the proper * & - of each speaker. 👍
@mehmetcemalcepeloglu1219
Жыл бұрын
A minor question and a candid opinion: Why did you use only 2 screws on the rear panel instead of 4? You may consider a gentle flax oil polishing on the surface for an even better finishing appearance. However though, a fairly practical and a good job, worth to be an instructive applied course work you put out there. I like to own a pair. Enjoy it. 👍👏🙂
@gontadiy
Жыл бұрын
We used only two because the fixing strength was sufficient. We also wanted to make adjustments, so we focused on ease of opening and closing. As you said, oiling it makes it look better. I applied beeswax wax later. I would like to continue to enjoy making things. Thank you very much.
@Catawallupin
5 ай бұрын
I was also curious about only using two screws on the back and what kind of wood protective finish was used. It would be better to have an airtight seal around the edges of the back panel and connection terminal hole so that the port tube is the only escape for air. I love how the corner joints continue the grain on all sides. I could never have made my cabinets look that good. The right tools for the job do help improve the finished work. I enjoyed the video and thank you for posting it @gontadiy!
@Voltechs-Tv
4 сағат бұрын
a nice video, keep it up! continue the good work with faith.
@Нашажизнь-т1о
Жыл бұрын
Сзади крышку уплотняют надо, иначе будет всё свистеть
@gontadiy
Жыл бұрын
Спасибо за ваш совет. Мы постараемся сделать его более герметичным.
@cvee2614
Жыл бұрын
Very good peaceful video to watch. Thank you!
@gontadiy
Жыл бұрын
Thank you very much. I hope this will be helpful.
@Unker_Spunkanathan
Жыл бұрын
The wood has such nice grains. ❤
@gontadiy
Жыл бұрын
Thank you very much! I love the grain of real wood.
@tiaggovox
Жыл бұрын
Que vídeo incrível,Parabéns! poderia fazer outro vídeo ensinando a fazer pares de monitores de áudio para home studio?
@gontadiy
Жыл бұрын
Obrigado. Estes altifalantes são ligados por cabo, pelo que dependeria da ligação do amplificador. Desculpe, é difícil fazer um vídeo mostrando como emparelhá-los. Desculpe 🙇.
@jorgealvarez1050
Жыл бұрын
Muy bonito y prolijo quedo, Felicitaciones!!! Te animo a hacer uno de tres vias (woofer, medios y twetter) con divisor pasivo y potenciometro en twitter y wofer, asi tenes mayor control, saludos desde Buenos Aires!!!
@gontadiy
Жыл бұрын
Gracias por los consejos. El woofer tiene un subwoofer separado. Todo el mundo comenta donde está el tweeter, así que voy a instalar un tweeter y probaré.
@jorgealvarez1050
Жыл бұрын
@@gontadiy bueno, entiendo que es un parlante "rango extendido" por lo tanto no necesita twetter, y el sub cubre las frecuencias que no llega un parlante pequeño, Pero mi experiencia es que dividiendo el rango dinamico en tres drives con divisor pasivo, lograras una mejor experiencia auditiva de "audiofilo" hago bafles hace 30 años, un abrazo y exitos!!!
@gontadiy
Жыл бұрын
@@jorgealvarez1050 Gracias por la información. Es muy útil ya que todavía soy muy nuevo en los altavoces. Estaré encantado de utilizarlo como referencia.
@khankorea3938
Жыл бұрын
안녕하세요 참역사 운영자입니다. 덕분에 좋은 영상 잘봤습니다. 우리역사에서 가장 건강한 장군을 살펴본다면 최영장군으로 볼수있겠습니다. 타고난 건강도 있으시겠지만 특징은 조석으로 삼구를 했다는 기록이있죠 고려장군들은 사병이나 장교나 규칙적으로 무예 무술을 훈련했지만 이와는 별도로 최영장군은 "삼구"를 했다는 기록은 따로 의미가 있다고 보여지며, 삼구란 "조금빠른 걷기"입니다. 유념하실것은 삼구의 요령으로써 "몸전체게 힘을 주고 짧게,세바퀴를 돈다"는 점 참고하시면 적지않은 도움이 되리라 믿어집니다. 감사합니다.
Conclusion : If you have tools , you can do everything!! Nice wood and perfect work also i like more a speaker with two separated modules one for the highs and one for the lows using a crossover in 2 way build with so nice wood sound will be more bautifull and presice!! Thanks for sharing!!
@gontadiy
Жыл бұрын
Thank you. You are right, anything can be done when you have the right tools. Please try to make it. I hope it will be helpful.
@Drumsholic
Жыл бұрын
@@gontadiy I have allready make two tower speakers with 2way system and they can drive any content amazingly good without subwoofer needed also i have not so good wood with so nice thickness and straints but they sound amazing.
Good hands and skillfull great job bro listen with pleasure...
@gontadiy
6 ай бұрын
Thank you very much! I hope this is helpful.
@yesimsaygin6415
6 ай бұрын
MDF malzemenin ses ile uyumu sert ağaçlara göre daha makul, sadece ön paneli ağaç diğer bölümleri MDF yaparsanız ses daha iyi olacaktır ...
@gontadiy
6 ай бұрын
Tavsiyeniz için teşekkür ederim! Buna başvuracağım.
@田中徹-o5m
9 ай бұрын
シングルレンジでもボックスに入れると音が激変します
@VHNFCRISTO
Жыл бұрын
si claro es echo en casa pero tiene mas herramienta que un mismo taller cuando se habla de casa es con lo poco recursos que tenga hay demuestra un trabajo mas que profeccional
@gokhanketenci71
5 ай бұрын
çok guzel ellerinize sağlık,kullandığınız ahşap çam mı? ve tam ölçülerini yazarsanız mükemmel olur..
@gontadiy
5 ай бұрын
Sedir ağacı. Boyutlar burada gösterilmiştir. m.media-amazon.com/images/I/61saqLSQWlL._AC_SL1095_.jpg
@hermilex1589
5 ай бұрын
Наглядный пример, как не нужно делать колонки. Но из них можно сделать неплохие скворечники и пойти учить электроакустику.
@denisdenis5904
6 ай бұрын
Колонки должны быть из фанеры, а не дерева. Глупо делать из чистого дерева.
@amwartwork
9 ай бұрын
Using a different driver it will sound different anyway
@spiloFTW
Ай бұрын
this guy knows very little about speakers
@新月2024
16 күн бұрын
自分も下手ですが、安い中古スピーカー分解してユニットだけ使って、たまに作ります。
@dennyho5840
9 ай бұрын
In last part, it’s not a fair comparison since speaker unit seems not the same.
@hishnik528
6 ай бұрын
универсальный шпатель (ПАЛЕЦ)
@victormanuelperez6100
Жыл бұрын
WOW buenísimo yo también hago hacer mis cajas en cedro y aparte les hago la aislación acústica y la parte fonoabsorbente!!!
@gontadiy
Жыл бұрын
Gracias. Es la misma madera de cedro. No le puse aislamiento acústico, así que se ve mejor que el mío.
@victormanuelperez6100
Жыл бұрын
@@gontadiy te felicito por tu trabajo impecable, muchísimos aún no entienden que la madera también tiene mucho que ver a la hora de un buen sonido no sólo por sus subwoofers profundos y demás con fibro fácil y hasta aglomerado pero el tema para mí es la calidad del subwoofer definido y claro!!!
@hirokisaito6032
Жыл бұрын
杉板で高品質の音のスピーカーが出来ればすごいけどな。。
@dimonovichdima
6 ай бұрын
Маленькая звучит лучше а большая глухо.
@alexfridi8663
5 ай бұрын
good job but unfortunately the person has NO IDEA about Hi-Fi. Otherwise he wouldnt construct speaker out of the wood. every DYS speaker community will explain this as the first principle.
@gontadiy
5 ай бұрын
Thanks for the advice! I'll refer to it.
@miknord5493
9 ай бұрын
Sehr gut gebaute Box. Ich Bau mir auch selber Lautsprecher!
@gontadiy
9 ай бұрын
Ich danke Ihnen! Ich hoffe, dies ist hilfreich. Bitte versuchen Sie, es zu schaffen!
@desktorp
Жыл бұрын
wow I've never seen a hole cutter like that.. I need one of those!
@gontadiy
Жыл бұрын
Here are the drilling tools. amzn.to/3blJ9CR
@gustavoceballos4235
6 ай бұрын
Con conocimiento,habilidades , dedicación y herramientas como las que tienes, se logran maravillas. Te felicito
@alcadon-j8k
5 ай бұрын
u could put the defective wood on back !!!
@mauaudy
4 ай бұрын
Pero en q lugar se pueden comprar esos colgantes xfa
@amilcarrolandoalvarez2009
Ай бұрын
Eso es calidad, pero donde encuentra un buen carpintero.
@obiwan241
Жыл бұрын
Excelente video, un gran inspiración
@gontadiy
Жыл бұрын
Gracias. Espero que esto sea útil.
@alfonsocampos
Жыл бұрын
Lógicamente la madera gruesa y el tipo de madera es mejor. La tapa trasera es la que da mejor resonancia si es enteriza
@gontadiy
Жыл бұрын
Gracias por los consejos. Lo tendré en cuenta.
@Mario-lt3ne
5 ай бұрын
A escuchar jazz-fusion japones!
@OscarHernandez-ym4hx
4 ай бұрын
Can you post more music with mid and other with low base. It seems that only highs are being produce by this model speaker. Great highs. Thank you friend.
@gontadiy
3 ай бұрын
Thank you for your comment. If I ever make a video next time, I will consider the range of sound and shoot for it.
@thomasschafer7268
11 ай бұрын
😅was ist denn mit der Eigenresonanz des Holzes. 30 Jahre lang verpönt .und nun baut jeder boxen aus massivholz.tetsuo Nagaoka hat das nie getan.
@PAINFOOL13
Жыл бұрын
Can only wonder what they would sound like with a small tube amp ?
@gontadiy
Жыл бұрын
I'm sorry. I don't have a tube amp, so I haven't been able to verify this yet.
@sheep1919
5 ай бұрын
頑張れ!バウワース&ウィルキンスとバング&オルフセンに勝て!
@АндрейГорбатенко-ф9б
Ай бұрын
Красиво, добротно, но овчинка выделки не стоит😊
@julioduarte7021
Жыл бұрын
Hola señor Gonta Dty. Una consulta el instrumento que utilizó con el taladro cual es su nombre y donde lo puedo conseguir. Es una buena herramienta para hacer los huecos para los parlantes.
you should try rock wool rather than synthetic foam, inside. Nice job !!!
@gontadiy
5 ай бұрын
Thank you very much! I will take your advice into consideration.
@MomentosRamirez-Vegas
5 ай бұрын
Demasiado casero, no tiene nada de herramientas.
@sergiistl6034
5 ай бұрын
Блин ...вспомнил как в школе своречники делали
@myturkishlife1777
Жыл бұрын
If you rotate the driver 90° it will match the wood grain 😁 Have a great day everyone 👍
@gontadiy
Жыл бұрын
You mean the grain of the speaker. You are right, thanks for the advice.
@myturkishlife1777
Жыл бұрын
@@gontadiy there is no need too , it looks great 👍
@EduardoMendez-vm3yu
5 ай бұрын
LOS DOS SON BUENOS CON TAL QUE LA MADERA SEA RESISTENTE
@rudolfkrebs2311
Жыл бұрын
Beim alten Lautsprecher sind die Höhen sehr betont! Beim neuen ragen die Mitten mehr hervor! Insgesamt ist es ein markanter Gewinn in der Klangqualität! Super gemacht! 👍😎🇦🇹
@gontadiy
Жыл бұрын
Ich danke Ihnen! Ich wusste, dass sich der Klang im Laufe der Nutzung verändert, aber ich wusste nichts über die Bandbreite des Klangs. Vielen Dank für diese Information.
@rudolfkrebs2311
Жыл бұрын
@@gontadiy Du kannst mit einem Equalizer probieren, wie sich ein Klang verändert, wenn du die Mitten lauter machst! Ich hab mein Hobby mit einigen Synthesizern und es ist immer wieder interessant, mit einem Equalizer oder Mischpult, das einzelne Kanalzüge hat, den Klang so zu verändern, dass er total anders klingt! Mir ist das mit einem Klang einer Flöte gelungen, den ich am Computermischer so verändert habe, dass es wie die Stimme eines singenden Mädchens geklungen hat! Da ist verdammt viel Potenzial drinnen! Ich wünsche dir alles Gute und viel Erfolg! 👍😎🇦🇹
@kgspollux6998
5 ай бұрын
Sorry, but I prefer your first speaker performance. The new one seems to be too aggressive . . .
@gontadiy
5 ай бұрын
Thanks for the feedback.
@Alexey-30
4 ай бұрын
динамик с конусом дал больше высоких.. от дерева не зависит.. дерево влияет на низкие частоты.. чтоб первая колонка заиграла... нужно в первую обклеять поролоном внутри... и добавить высокочастотный динамик
@gontadiy
4 ай бұрын
Спасибо за совет.
@AEROWINS45
2 жыл бұрын
grat job thx for share.
@gontadiy
2 жыл бұрын
Thank you for your comment. I hope it is helpful.
@latarima-decoracion2769
4 ай бұрын
Hola! Saludos desde Argentina! Según mi opinión, el sonido del mas pequeño es mejor, ya que al ser bocinas pequeñas necesitan cajones pequeños. Con el grande consigues mas resonancia, pero no fidelidad.
@gontadiy
4 ай бұрын
Tienes preferencia por el sonido, así que puedes elegir el que prefieras. Esperamos que le resulte útil.
I watched a Company sell cardboard and plastic speakers for $48,000...partical board and such...can you believe that ???
@gontadiy
10 ай бұрын
It's great! If someone thinks the sound quality is good and worth it, it will sell.
@RRan-dk7ct
10 ай бұрын
I quess i was always told "Solid Wood" was true sound.@@gontadiy
@alexkonchik2110
9 ай бұрын
Мне кажется такой способ склейки недостаточно прочным недай бог колонка упадёт и она разлетиться нужны очень точные радиальные пилы для скосов и получаются погрешности нестыковки я согласен чтодерево должно звучать я делаю проще из толстой качественной фанеры 25-35 мм беру все четыре стороны ящика без передней и задней крышки и вырезаю прмоугольный паз с передней стороны во всех четырёх на расстоянии от переда на толщину фанеры или больше если необходимо спереди ставить сеточку или утопить переднюю панель клею из дерев планок или вырезаю лобзиком из фанеры прямоугольные рамки толщинойпаза и и щириной 40-540 мм всё ставлю на эпокс или другой клей стягиваю и получается что тачасть планок которыя выходит из фанеры образуют периметры для крепления задней и передней крышки можно на клей я ставлю резьбовые втулки в периметрыпланок и уменя ас на винтах под пер и зад крышки ставлю самокл резинки для пласт окон получ идеальная герметизация внутрь паралон и синтипонПазы по всему периметру так же вырезаются и ззади по периметру ас получается очень жестрие и звенят как одно целое можно дрова колоть
@gontadiy
9 ай бұрын
Спасибо за подробный совет! Другие люди говорили нам о важности герметичности. Я обращусь к этой информации в следующий раз, когда буду создавать колонку.
very nice build! love the aesthetics! I have 2 questions: does the thickness of the wood influence the sound quality? and also commercial speakers are built with MDF, is it because of sound quality or because of cost?
@gontadiy
4 ай бұрын
I think it is for sound quality, as the higher density is considered better.
@Kai-wu6gu
4 ай бұрын
@@gontadiy if higher density is better wouldn't concrete/CaC03/sand filled case, with density ~ 2.7g/cm3 much much better than wood, with density generally bellow 1g/cm3?
@dssd3824
10 ай бұрын
Работа понравилась. Есть ряд вопросов. Корпус держится только на клее, не расклеился при эксплуатации? Как ведет себя фазоинвертор с таким звукопоглатителем? И не лучше ли было оклеить внутренность колонки ватином и сделать тыльный фазоинвертор?
@gontadiy
10 ай бұрын
Спасибо за Ваш комментарий! Клеевое крепление достаточно прочное, чтобы удерживать их на месте, поэтому они по-прежнему удобны и не разваливаются. Что касается фазы, надеюсь, Вы сможете проверить изображения в видеоролике. Я не очень хорошо разбираюсь в акустических системах, поэтому, к сожалению, не могу ответить подробно. Приношу извинения.
@ВладимирКурбатов-ы2с
Жыл бұрын
Вообще-то не рекомендуется изготавливать корпуса из массива, т.к.трудно заглушить острые резонансные явления, требуется более основательное демпфирование. Из массива можно получить красивый ящик с посредственным звуком. Гораздо более подходят МДФ и ДСП , сверху обклеиваются шпионом. Эта древесина стабилизирована, ее не ведёт в отличие от фанеры и она не даёт паразитных призвуков, особенно когда качественно задемпфирована
как работа ручной работы просто прекрасный пример. ну а для полной эстетики нужна лицевая панель с акустической тканью.
@gontadiy
6 ай бұрын
Спасибо! Надеюсь, это будет полезно.
@rzboril
5 ай бұрын
Pleas what is sound spectrometer? Android app.
@gontadiy
5 ай бұрын
This iPhone application was used for the measurement. apps.apple.com/jp/app/id448155923
@1233jlc
Жыл бұрын
Bonjour, Merci pour votre vidéo. Félicitations pour votre belle réalisation. Cela donne envie de faire de même. 👍
@gontadiy
Жыл бұрын
Nous vous remercions de votre attention. J'espère que cela vous sera utile.
@Boriswell
9 ай бұрын
А почему не было звука?
@RennieAsh
4 ай бұрын
May I suggest chamfering the rear of the cutout for the driver. Best to do before installing the front panel, but you can still do a rough chamfer using a rasp on a completed box. Gives the driver better space inside.
@kapa6776
10 ай бұрын
В целом здорово, но с такой толщиной дерева как динамик так и контактную колодку можно было посадить заподлицо. Я не мастер, но мне кажется, что сучки на древесине, а тем более на цельном элементе, а например не на шпоне или на фанере, будет отрицательно сказываться на звучании. Просто одного клея наверное мало,
@gontadiy
9 ай бұрын
Спасибо за совет! Я обязательно воспользуюсь им.
@valentinmagureanu8039
Жыл бұрын
☺️😊😟😟 Îmi plac oamenii care fac ceva util!☺️🙂🙂🙂☺️☺️😊
@gontadiy
Жыл бұрын
Vă mulțumesc! Sper că acest lucru este util.
@zxcvbnm02021991
10 ай бұрын
старые играют лучше...
@carlosroa6260
Жыл бұрын
No estuvo bueno cometió muchos errores por nombrar solo 2 cuando pegó el tubo de la salida de aire debería haberle dejado el exceso de pegamento para mayor seguridad también en la tapa trasera debe de llevar una junta o empaque antes de atornillar y algunos errores más que cometio
@gontadiy
Жыл бұрын
Gracias por sus consejos. Lo tendré en cuenta.
@msg1044
5 ай бұрын
Prima Video, wenn man den Unterschied hört und man sich entscheiden müsste, dann sind die neuen voller, mehr Tiefen, aber auf Kosten der klaren Höhen... Also, ich würde 2 x 2 bauen und parallel betreiben 😂😂😂 oder, das ist natürlich die sauberere Lösung, Du machst Dich nochmal an die Arbeit, und natürlich mit dem tollen Zedernholz❤❤❤ und baust da aber 2 Wegesystem ein, also schönen Mitte tief Chassis und nen schönen feinen Hochton Treiber, im Gehäuse dann Schallplatte zur räumlichen Trennung des Hochtontreibers vom tiefton Reflexraums... Aber die Aussenhaut ist traumhaft, macht sich sicherlich schön im Raum und Dezent...
@gontadiy
5 ай бұрын
Ich danke Ihnen für Ihren Rat! Ich werde mich darauf beziehen, wenn ich meinen nächsten Lautsprecher baue.
@josealves4278
9 ай бұрын
Qual seria a dimensão da caixa para altifalantes com 165mm de diâmetro?
@gontadiy
9 ай бұрын
É difícil medir corretamente com base apenas no tamanho do altifalante. Recomenda-se que se contacte o fabricante.
@fredericmonnier3438
13 күн бұрын
Belle realisation, idealement il faudrait que le coffret soit « étanche « c’est a dire que la face arriere soit collée sur tout son périmètre comme la face avant
Пікірлер: 566