How I Made my Wooden Boat.
This is a detailed process building a Wooden Dinghy using the "Stitch and Glue" method, and "Roll and Tip" paint process.
It takes you through the layout, cutting of parts, Stitch and Glue assembly, fiber-glassing, fairing, priming, painting, installing rudder hardware and finally the launch.
The Boat: SD-11 Semi Dory.
LOA: 11'-4" (3.45m)
Beam: 4'-2" (1.27m)
Draft: 4" (10cm)
Weight: 90 lbs. (40.82kg+-)
Plans and Supplies: www.boatbuildercentral.com/pr...
Look for more videos: How I made the Mast for SD-11 Semi Dory
How I made the Sail (Sprit Rig) for SD-11 Semi Dory
How I made the Tiller for SD-11 Semi Dory
Please remember to Subscribe!
www.holtanlive.com/
Негізгі бет DIY How I built my Sailing Dinghy
Пікірлер: 51