Follow me to see how easy it is to replace the clockspring on your 2015 or newer F150 or F250 and get the steering wheel buttons working again.
On my 2015 F150 the buttons were intermittently working. Most of the time pressing a button would do something else entirely.
The tools you will need are a 10mm socket to disconnect the battery, a 24mm or 15/16 socket to remove the steering wheel, a 7mm socket for the steering column cover, a flathead screwdriver for prying, and a thin rod to remove the airbag. Small hex wrenches or a meat thermometer would also work for that.
The entire process should only take 30 minutes or so if you take your time. The steering wheel bolt is only tightened to 40lb ft, or "extra snug" if you're not using a torque wrench.
My clockspring was Ford Part# HL3Z-14A664-B. You may have a different part number depending on option of your pickup.
If you just need the left side button switch you can get one here:
- amzn.to/3LnB6YK
The jump pack I use:
- amzn.to/3Pebcrv
My spray in bedliner kit:
- amzn.to/3rEUFVS
or if you want a tintable kit to make it your own color:
- amzn.to/3RMC6K4
If you want to add extra antitheft security to the tailgate from being stolen get one of these locks:
- amzn.to/3PFECyZ
Fabric harness tape:
- amzn.to/3tlu40x
I also do a lot of my modifications with Forscan. You can get a Forscan cable here:
- amzn.to/3PrG1dr
As an Amazon Associate I earn from qualifying purchases. I earn a small commission if you click my link and make a purchase at no additional cost to you.
#Clockspring #F150Repair #HeartlandRebuilds
Негізгі бет Автокөліктер мен көлік құралдары DIY: How To Replace F150 Clockspring To Fix Steering Wheel Buttons 2015+
Пікірлер: 151