DIY / How To:
Replace Rear Shock Absorbers
Toyota Land Cruiser 120 / PRADO 120
Bildilla Magasin
Land Cruiser 120 series play list ( 67+ videos ): • Toyota Land Cruiser 12...
The shock temperatures at the back of my Toyota Land Cruiser 120 (3.0 D4D), have started to leak some oil. This is not so strange as they have a lot of rust damage, and I had ordered new dampers in anticipation of when I discovered the leak.
This is an easy job, provided you have the necessary equipment:
17 mm cup
19 mm wrench
Bayonet saw with metal blade!
Then I have to cut the top with the fastening nut due to rust. It was impossible to unscrew them!
------------------------------------------------
Land Cruiser 120 serie spilleliste ( 67+ videoer ): • Toyota Land Cruiser 12...
Støtemperene bak på min Toyota Land Cruiser 120 ( 3.0 D4D ), har startet å lekke litt olje. Det er ikke så rart da de har mye rust skader, og jeg hadde bestilt nye dempere i påvente av når jeg oppdaget lekasje.
Dette er en enkel jobb, viss man har det nødvendige utstyret:
17 mm kopp
19 mm fastnøkkel
Bajonettsag med mettalblad!
Så må jeg kutte toppen med festemuteren på grunn av rust. Det var umulig å få skrudd de løs!
----------------------------------- Disclaimer! -----------------------------------------------
The videos are made by an untrained mechanic! All the videos are therefore to be regarded as my own experiences, and no conclusion. The videos show what I have done, and the result does not always have to be as desired. Sometimes things go directly wrong, and then I try to find out what went wrong, and try to set a better example so that others will not have to make the same mistake as me.
The videos were filmed by myself, and it may have been unknowingly missing to include ALL the details. I try my best to find out what I do and what I find out. But getting cameras in the right places is not always easy!
Very important!!! Do not take any chances with safety, neither your own nor anyone else's! Never work under a car, without and double security. Things can happen, so you must always have extra safety in case something should break or overturn, etc.
Working on cars poses a danger no matter what. So be aware, and if you do not feel 100% sure of the result, rather ask others to help you or double check what you have done, before you expose yourself and others to danger!
---------------------------- Social -------------------------------
Home page: www.bildillamag...
Facebook: / bildilla-magasin-21561...
Instagram: / lermax_cars
Негізгі бет DIY / How To: Replace Rear Shock Absorbers - Toyota Land Cruiser 120 / PRADO 120 - Bildilla Magasin
Пікірлер: 17