the cheapest i could find for the tune up was 460.00 and i would have to rent a car for the day at 30.00. 750 at the dealership. I did it myself 80.00 after a 20.00 coupon thank you for this great video.!!!!!
@Simmonsracing187
5 жыл бұрын
You're very welcome, I'm so happy to help out,more videos coming👍🏽👍🏽
@fabricebouillaud
5 жыл бұрын
Simmons racing187 😀
@mycofairbanks3321
Жыл бұрын
Love seeing a dad and son working together. Not to mention that you helped me figure this stuff out. Great job
@Simmonsracing187
Жыл бұрын
Thanks for viewing 👍🏽
@TheDutyPaid
2 ай бұрын
I like that you covered over the intake as soon as it was open
@ramonbranchcomb9528
2 жыл бұрын
I'm a retired disabled veteran who use to work on cars and trucks but I've taken a beating over the years and I usually take my vehicles to the dealership but now I'm unable to afford it so I'm planning on doing the exact same tune-up to my 2006 hyundai tucson gls 2.7ltr. Your video is very helpful and I'm blessed to have come across it. I will view it again before I start on my tucson tomorrowmorning. Thanks so much sir.
@Simmonsracing187
2 жыл бұрын
I'm so glad i can help out, Don't hesitate to ask anything questions, thanks again for viewing...comment,like subscribe 👍🏽👍🏽 and thank you for your service 👨✈️
@darrelsmith4549
Жыл бұрын
You're by far the most easy to understand and well explained video out, great job 💪💪❤️
@Simmonsracing187
Жыл бұрын
Hey really appreciate that, thanks si much for viewing 👍🏽
@mhatfield1
2 жыл бұрын
This video has helped me out a lot! My 2005 started sputtering, to the point of stalling at stop signs. That was not a happy thing. Thank you for your explanation video!
@Simmonsracing187
2 жыл бұрын
Hey you're very welcome, thanks for viewing and subscribe for more tuscon videos
@byteman21
Жыл бұрын
Thank you 🙏. Your video was very helpful with my 2007 Tucson 2.7. I ended up replacing all the spark plugs, valve cover gaskets, spark plug wires and I found a small leak just starting on the back of the valve cover gasket in cylinder 3 do to old gasket getting brittle. You make it look easy my man! Thank you again!
@Simmonsracing187
Жыл бұрын
Thanks so much for viewing, glad i could be a help
@byteman21
Жыл бұрын
@@Simmonsracing187 I wish I could post a pic. The engine is so clean for a 2007! I need to flex properly, 😂 😂
@dukedavis8950
4 жыл бұрын
My daughter has same vehicle I watched your video how to change plugs 06 Tucson it really helped me out you explained how it's done well . Thanks for the help
@Simmonsracing187
4 жыл бұрын
Your very welcome, thank alot for viewing, glad i could help
@Oscar-t21
11 ай бұрын
Great job doing the spark plugs! And thanks so much for showing us the job. I am about to do the same job tomorrow. Be safe up there 🙏🏾
@Simmonsracing187
11 ай бұрын
Thanks for viewing 👍🏽
@duck42069
2 жыл бұрын
Gotta love these new vehicles where they try to force you to take a vehicle to the garage over some spark plugs, but awesome video, I am going to be doing the same thing tomorrow.
@Simmonsracing187
2 жыл бұрын
So true, hopefully i could be some help, thanks for viewing
@wolfgangzeisig6313
Жыл бұрын
the best video yet on a 2.7 thanks
@Simmonsracing187
Жыл бұрын
Appreciate that!! Thanks for viewing
@bigtop5316
2 жыл бұрын
FYI: Recommend replacing the 2 gaskets while the manifold is off, Couple more dollars avoid misfires from air leaks later on- Check the bolt torques too / Cheers!
@Simmonsracing187
2 жыл бұрын
Absolutely, i forgot to mention that i used new gaskets as well as adding antiseeze on thread of plugs.. thanks for viewing
@orionbound1
4 жыл бұрын
Thank you for posting this. It was just what I needed to get to the rear spark plugs!
@Simmonsracing187
4 жыл бұрын
I'm glad i could help you out, thanks again for viewing
@astaticfanatic2410
3 жыл бұрын
You don’t need to touch anything to throttle body or air box. Also don’t pull out the metal clip on wiring harness, just push it in and pull on connector.
@Simmonsracing187
3 жыл бұрын
Thanks good tip, i realized after the fact...this was my first attempt at the job, recorded on the fly
@poppagrouch4781
Жыл бұрын
I'll be doing valve cover gaskets this weekend on an 06....
@OffGridInvestor
4 жыл бұрын
This surprisingly is the exact same as the older (early 2000s) 2.7 litre delta hyundais like the sonata, santa fe, tiburon, and rarely seen trajet minivan (I got one), and in the USA the grandeur (we got the 3.0 theta engine). In the USA you got the kia sedona with the 3.8 litre from 06 to 10 but in 08 over here we changed to like a modified 2.7 that was the same as this except somehow VTEC was added to it. Basically an update of the old early 2000s delta. The 3.8 is actually renowned for its chain guide plastic just crumbling and dropping into the sump. Some people have a phenomenal 400k miles run, others are replacing stuff before 90k miles.
@Simmonsracing187
4 жыл бұрын
Thanks good information
@brettnicholas3190
2 жыл бұрын
Thank you! Yours is the video that got me through this. What a pain in the ass this job is!
@Simmonsracing187
2 жыл бұрын
Thanks for viewing... please subscribe for more tuscon video
@oatnoid
4 жыл бұрын
Excellent video Thanks. I see why you recommended taking pictures Remember when changing spark plugs involved 1 socket wrench and a socket? Now this simple job would cost you 400 bucks at the dealer.
@Simmonsracing187
4 жыл бұрын
Glad I could help, thanks again for viewing my video
@anotherzollingerbrother7879
3 жыл бұрын
Thanx guys. You are appreciated
@Simmonsracing187
3 жыл бұрын
Thanks for viewing 😀
@Simmonsracing187
3 жыл бұрын
Glad to be able to help out and i appreciate your sub to channel
@danielchurchill2438
11 ай бұрын
Helped a bunch, thanks for the post
@Simmonsracing187
11 ай бұрын
Thanks for viewing 👍🏽
@sanjake51
6 ай бұрын
Love the video helped me change sparkplugs. Does that tucsan have a red amp wire coming from the battery? Looks like i saw one, but I've heard you cant put one on a tucsan ?
@Simmonsracing187
5 ай бұрын
Thanks for viewing, I'm pretty sure that wire was for a sub woofer my daughter had in the car
@sanjake51
5 ай бұрын
@Simmonsracing187 been trying to figure out how she had one mine won't let me install a aftermarket stereo cause it has a factory amp and factory subwoofer I want to put a aftermarket amp and subwoofer and was wondering how she was able to have one hooked up
@Simmonsracing187
5 ай бұрын
@sanjake51 she had a after market stereo, sub and speakers
@matthewford5946
4 жыл бұрын
Great video big help and straight to the point.
@Simmonsracing187
4 жыл бұрын
Thanks for viewing, hopefully it helped, any question just hit me up
@cochroach10
2 жыл бұрын
Seriously great video! Thanks so much for taking the time to make it!
@Simmonsracing187
2 жыл бұрын
Thank you for viewing, hopefully i could help you out
@cochroach10
2 жыл бұрын
I'm in the process of this right now and I can't get the vacuum hoses off how did you do that?
@Simmonsracing187
2 жыл бұрын
@@cochroach10 which hoses are you referring to? Any without hose clamps i pulled while twisting
@cochroach10
2 жыл бұрын
@@Simmonsracing187 thanks! Yeah I ended up getting them off by twisting just like you said. It felt like I was going to rip them. Used a small flat head to gently push while I twisted and it worked like a charm.
@Simmonsracing187
2 жыл бұрын
@@cochroach10 awesome glad it worked out for you
@junkyardsearcher6407
Жыл бұрын
Thank you for this video!
@Simmonsracing187
Жыл бұрын
Hopefully I helped you out, thanks for viewing 👍🏽
@RenelaranaRodriguez
2 жыл бұрын
Hi, looking for how to do the tune-up to the 2006 Tucson, some appear earlier but nothing like this is the precise model for my wife's car that she bought in 2012 in Colorado and the truth is that she has not given me any problems and Since it was bought, it had not been tuned up at this level and I am going today with your very well-precise video, thanks in advance... Simmons Racing team 187
@Simmonsracing187
2 жыл бұрын
I'm thinking it should be the aame as this video
@dukedavis8950
3 жыл бұрын
Hi just wondering if you ever had to change the valve cover gaskets my daughter's Tucson leaks in to where the spark plugs are fouled the plugs so I have to do it all again.
@Simmonsracing187
3 жыл бұрын
Unfortunately I've never done the valve cover gasket
@yazou2004
Жыл бұрын
Good video, thank-you
@dondagy9109
2 жыл бұрын
Great video!
@Simmonsracing187
2 жыл бұрын
Thanks so much for viewing 😀
@BADAZZ93STANG
5 жыл бұрын
Awesome video brotha!
@Simmonsracing187
5 жыл бұрын
Thanks brother
@tomlamiotte308
3 жыл бұрын
Excellent step by step instructions
@Simmonsracing187
3 жыл бұрын
Thanks for viewing, glad to help
@stratsurvivor
2 жыл бұрын
Great walk through. Thank you!😁
@Simmonsracing187
2 жыл бұрын
Thanks for viewing hopefully it helped
@younglava513
5 жыл бұрын
Hey did you have to put new gasket n sealer on after finishing tuneup??
@Simmonsracing187
5 жыл бұрын
Actually i forgot to mention that in video, new plenum gasket, and anti- seeze,on spark plug threads...thanks for viewing,no sealer on gasket though
@TweetyTweets
5 жыл бұрын
Like Father Like Son amazing talent
@Simmonsracing187
5 жыл бұрын
Thank you
@chrisdelgado3530
2 жыл бұрын
Nice video!!! Thanks!!!!
@Simmonsracing187
2 жыл бұрын
Thanks for viewing, subscribe for more tuscon videos
@lesterramdeo1395
5 жыл бұрын
Nice job good information
@jim1941
2 жыл бұрын
Nice job.
@maxen06941
3 жыл бұрын
so the front three are cylinder 4,5,6? and the ones at the back under the intake manifold are 1,2,3?
@Simmonsracing187
3 жыл бұрын
Yes
@stevewinter9978
3 жыл бұрын
Bank 1 is closest to the firewall (rear) and has cylinders 1-3-5 ... Bank 2 is closest to the radiator (front) has cylinders 2-4-6 ... Firing order is 1-2-3-4-5-6 ... Coil Pack groups are 1-4, 2-5, 3-6
@chefchavarre
2 жыл бұрын
Hey boss, question, I have the same car. Where is the ignition coil located? I need to change mine but I don't know if I have to get on the ground for it or if I can just stand up while doing it
@Simmonsracing187
2 жыл бұрын
Standing looking under hood it's on right side of engine, follow the sparkplugs wire and trace from plug to coil pack
@chefchavarre
2 жыл бұрын
@@Simmonsracing187 Okay thank you! Now the only difference is that my Hyundai Tucson 2.7 is a 2005 and not a 2006 like yours. That shouldn't matter right? Under your hood looks pretty much the same on mine
@Simmonsracing187
2 жыл бұрын
@@chefchavarre my daughter car was a 2005 also, any problems don't hesitate to hit me up
@chefchavarre
2 жыл бұрын
@@Simmonsracing187 thank you so much, I will reach out!
@kenstephensvideos
5 жыл бұрын
Tagged this video to help me with a plug/wire change, valve cover gasket swap and plenum gasket on the same 05 Tucson v6 engine here soon!
@Simmonsracing187
5 жыл бұрын
Leave a comment if you have any questions
@kenstephensvideos
4 жыл бұрын
@@Simmonsracing187 It's been almost a year since you posted this video, but do you recall about how long it took to complete this plenum removal, plug/wire change and reinstall? I've been bogged down to get this done on my same car but targeting this month...just wondering how much of weekend to set aside
@Simmonsracing187
4 жыл бұрын
@@kenstephensvideos its a pretty easy job,should not take more than 2 hours total,make sure you replace plenum gasket,and use antiseeze on thread of plugs
@Simmonsracing187
4 жыл бұрын
@@kenstephensvideos if you have any more questions, hit me up
@kenstephensvideos
4 жыл бұрын
@@Simmonsracing187 Thanks much!
@TweetyTweets
5 жыл бұрын
EXCELLENT reviews
@macknumber9
5 ай бұрын
Where you from? Looks like the north east
@Simmonsracing187
5 ай бұрын
Philadelphia
@jeffreyevans6892
2 жыл бұрын
Well done.
@Simmonsracing187
2 жыл бұрын
Thanks for viewing
@rw3al
3 жыл бұрын
Outstanding Video. Many thanks I'm about to have to jump on mine #5 misfire.....Ricky
@Simmonsracing187
3 жыл бұрын
Thanks, and appreciate you viewing 👍🏽
@Simmonsracing187
3 жыл бұрын
Good luck, not to bad of a job to do
@adolphff
3 жыл бұрын
Wrong!¡ 2009 are completely different are not same!¡
@assi70ahmed
2 жыл бұрын
Hi please could you let us know where is the map sensor ?
@Simmonsracing187
2 жыл бұрын
Staring at motor it will be on right side front of intake manifold
@your247support
3 жыл бұрын
Perfect video. Thanks man
@Simmonsracing187
3 жыл бұрын
Thanks for viewing
@leahsimmons9564
5 жыл бұрын
thanks for fixing my car!
@Simmonsracing187
5 жыл бұрын
No problem baby girl
@nathanmccumber2614
4 жыл бұрын
@@Simmonsracing187 this would be left manifold?
@Simmonsracing187
4 жыл бұрын
@@nathanmccumber2614 the intake plenum is 2 part,top comes off to allow access to rear plugs
@john_hanley1458
5 жыл бұрын
Nice entro it was realy cool 😎
@cooksousa8468
4 жыл бұрын
very helpful thanks !
@Simmonsracing187
4 жыл бұрын
I'm glad i could help you out, thanks for viewing
@nickswedlund517
3 жыл бұрын
Great video, very helpful
@Simmonsracing187
3 жыл бұрын
Thanks for viewing
@glitchthecat5011
Жыл бұрын
Same for sportage with 2.7
@Simmonsracing187
Жыл бұрын
What year?
@glitchthecat5011
Жыл бұрын
@@Simmonsracing187 I watched this one other video before yours and the dude was taking off all sorts of shit that didn't seem right..dude even took off throttle body
@Simmonsracing187
Жыл бұрын
@@glitchthecat5011 I've seen that also didn't make any sense to me, but i made this video as i was doing the job for the first time....pretty much straight forward stuff,btw thanks for viewing
@redraven4641
3 жыл бұрын
I removed all of the bolts/nuts, but the manifold will not clear the front studs. It appears to be pivoting on the top stud of the surge tank with not enough clearance to rotate off of the two front studs. Did you have to loosen thr surge tank behind the manifold and slide it to the left in order to free the manifold from the stud and lift it up?
@Simmonsracing187
3 жыл бұрын
There one stud on each side of plenum, they are pretty short,you should be able to pull it off,did you remove the brace that reaches across the top of engine?..2:34 of video
@redraven4641
3 жыл бұрын
@@Simmonsracing187 I removed the brace, but it appears (to me) that the manifold continues to pivot on the horizontal stud on top where the surge tank meets the manifold (5:05 of the video). It seems like since the manifold pivots on this horizontal stud, the manifold lifts up on an arc, which causes the holes in the front of the manifold to bind on the two corner studs (not a straight upward pull off the studs). If the two front studs were shorter or the holes not as deep, then it may lift off the front studs and then slide horizontally (to the right) off the top stud, but this does not appear to be the case. I have tried rocking the manifold every which way but loose and the holes on the front of the manifold continuously make contact with the studs due to not being able to be lifted straight up (not much play between the studs and the holes). The manifold will lift on the front about an 1/8 of an inch before the front holes make contact with the studs. I appreciate your time and response. Thank you.
@Simmonsracing187
3 жыл бұрын
The plenum actually is 2 piece, there is a bolt that goes in from the drivers side going towards passenger side, and 2 or 3 bolts that go from passenger side towards drivers side,there is a plastic guard that will need to be removed to access one of the plenum bolts
@Simmonsracing187
3 жыл бұрын
@@redraven4641 is the plenum seperating from each other near firewall?
@Simmonsracing187
3 жыл бұрын
@@redraven4641 I've been thinking maybe that horizontal bolt on top may have actually been a stud with a nut,sorry I'm not 100% sure since this was my first time doing this job on a hundai
@Ben-Dedia
3 жыл бұрын
What year is this car
@Simmonsracing187
3 жыл бұрын
2005
@rafaelmoreirabratfisch3813
7 ай бұрын
Tenho uma dessa aqui no Brasil. E ela não tem essa barra anti torção como a do video.
@Simmonsracing187
7 ай бұрын
It may have been removed
@jamesfurnish5790
4 жыл бұрын
what is that back gasket close to the engine wall?
@Simmonsracing187
4 жыл бұрын
It's a metal gasket that goes on intake plenum, doesn't need to be replaced unless you damage it,you do want to replace plenum gasket that goes under plenum, it has 6 holes in it ,one per cylinder
@stevewinter9978
3 жыл бұрын
@@Simmonsracing187 For the Manifold-Intake Plenum Gasket, clean any build up around the edges ... I put it back without doing so and the gasket shifted just enough for the raised edge to get between the two mating surfaces. This created a leak that threw a Fuel Trim error ... As you tighten the nut & 2 bolts, jiggle the gasket to ensure the 'circle' seats itself in the round opening of the intake plenum.
Пікірлер: 142