Good video buddy, I am mostly 99% confident in rebuilding these motors ,but you sometimes forget the small steps which is why this particular video definitely deserves some credit!
@mikehike6894
3 жыл бұрын
This is the best instructional video ive ever seen on motor rebuilds. Well done sir
@crazychad2720
2 жыл бұрын
Awesome video. Thanks to this and my service manual i was able to confirm hot rods sent me a crank bearing kit with 2 right side crank bearings with the blue seal on one side when only ONE is suppose to have it. Luckily i caught that, removed the blue seal from the stator side crank bearing and dont have to find out what would have happened!!!!!
@kunalkhanna985
3 жыл бұрын
Nifty tool for DIY fork seal replacement. Great idea, thanks for sharing it !!!
@stevescheuerman
Жыл бұрын
outstanding.... building a 2007 KX450 motor and will refer to this video often
@MrJmattr3
Top shelf video! Great work!
@chasechevy8933
Looks like if you aren't replacing the crank, you don't even have to remove it from the left case/bearing and it will slide right out and back into the right crank bearing.
@stringbender247
2 жыл бұрын
You make the absolute best videos for everything KX 450 related and seeing as my son and i have 2016 and 2017 KX450s like you, you have been an absolute blessing sir. Thank you so much! Can i ask what VP you recommend or run? We dont race motocross only offroad races(amateur and recreational) Thanks in advance
@alexarks517
2 жыл бұрын
If you put the crank in the freezer for 30 mins it slides right into the main bearing.
@ignaciotorres9056
Que tipos de rodamientos lleva el cigüeñal ? Sirven unos c4 ?
@ronmower3694
nice
@sheldoncooper4281
Does anything hold the oil pump gear on? Or does it just sit in place
@cory8832
2 жыл бұрын
My engine cracked on my 2017, I have bought engine case set off ebay 2nd hand but its 2016, is anything different as I thought the 2017 had more power than the 2016, the top end I have is 2017 but bottom end is 2016
@Zayas0ne
🔥🔥🔥
@Killer.customz
Жыл бұрын
My 17 starting making a noise like somethin was loose inside so I took the side covers off and notice my kick start assembly has a lot of play is that normal?
@samirghis5644
Жыл бұрын
parfait
@bubbas66
2 жыл бұрын
Quick question so I keep seeing the torque specs for the head bolts are 44 ft lbs and other videos they are saying 14 which doesn’t sound right lol
@mrmotocross6819
3 жыл бұрын
Im rebuilding my water pump on my 2018 kx450. Wich is the same as your bike. You might know the answer to this question. What is the part # for the o-ring [B] in the inner clutch case removal section of the service manual? I have looked on the parts diagram onine but i cant find it. The service manual says i should replace the o-ring when i reinstall the inner clutch cover, wich ill have to take off to replace the water pump seals,bearings and shaft. But i cant find the part # anywhere. I have almost everything to do the job but a new o-ring. And im the type of guy i dont want to use the old one.
@bubbas66
2 жыл бұрын
I have a 2018
@koach4208
3 жыл бұрын
Hey hi u doin my name is keko an I like what u doin an teaching an can u teach me more please
Пікірлер: 36