Your voice is so sexy. I wish I knew you in real life
@RG-wy1ol
Жыл бұрын
Thanks for making this video 1st time I’ve ever seen a cheater pvc pipe but it works
@ajnunez117
4 жыл бұрын
Great video, I was almost done when until the torque wrench slipped and I ended up cracking my transmission housing 😰
@kkjjffss
4 жыл бұрын
Fuck bro, I hope things turned out ok.
@devilzwanganmidnight5951
4 жыл бұрын
I enjoy full explanation videos most people would cut the DIY and just explained “well I did this” and not specifically tell what they did.
@lancehunt2699
4 жыл бұрын
That was genius.... "you can find it at, your moms house"
@NeVeRkAuGhTsObEr
4 жыл бұрын
Straight forward just did mine used gm synchromesh didn't have grinds or pop outs just wanted to try it and see if it's smoother when shifting. Good video
@mchevownr
4 жыл бұрын
Great video! How does the transmission like the redline fluid? I called redline and have them my 03 RSX types information, their tech support told me to use redline MTL.
@LegendaryValky
4 жыл бұрын
Thanks for the compliment. It loves it. I tried royal purple after the redline and it wasn't as good. Let me know how the MTL is. From what I understand the MT-90 is their more general application stuff so you'll probably have success if they recommended it
@chadwickwicky67
10 ай бұрын
MTL is the way to go 👍 MT-90 is probably fine and still better than oem but MTL is definitely what you want in this transmission. As noticeable of a difference it makes , it makes noticeable difference on the second change too (as you get out more of the previous fluid)
@glasshalfempty1984
2 жыл бұрын
PVC pipe as a breaker bar? What?
@LegendaryValky
2 жыл бұрын
Worked didn't it?
@isaac1233410
6 жыл бұрын
Does changing the fluid help get rid of the 3rd gear pop out? I occasionally have the pop out.
@LegendaryValky
6 жыл бұрын
Yep, solved mine. Haven't had issues since.
@1188clean
6 жыл бұрын
that fluid helped me with 3rd gear grind and 2nd gear pop out.
@xxfilthydxx1273
3 жыл бұрын
You can fill it through the speed sensor instead of the fill hole
@YizTheGOAT
4 жыл бұрын
My 3rd gear just started popping out randomly, not many times but rather change the fluid now then later. Thanks! This video is a perfect step by step. Did you shift through the gears using clutch without the engine on right after?
@clayton_4897
2 жыл бұрын
I have a 3rd gear grind like slightest grind, goes in fine I can rev it to 8k fine no pop outs nothing (k24a) and when the trans warms up it grinds 3rd gear, when cold it doesn’t grind! Would changing the fluid help me in any way? Or is it a synchro? Thank!
@LegendaryValky
2 жыл бұрын
I'd definitely try some new fluid before replacing a synchro.
@clayton_4897
2 жыл бұрын
@@LegendaryValky thank you for fast response!
@jeremyhogue780
2 жыл бұрын
Very helpful thanks
@amine787
5 жыл бұрын
Is it the same thing for the 5 speed base model ?
@LegendaryValky
5 жыл бұрын
Yes
@migzk693
3 жыл бұрын
I got 300k miles on my RSX transmission and it feels Pretty solid, would it make it worse if I change the fluid ?
@LegendaryValky
3 жыл бұрын
No, you definitely should change it lol
@migzk693
3 жыл бұрын
@@LegendaryValky got it
@tylerweatherford1262
6 жыл бұрын
Would this help a problem with my clutch not engaging (won't go into any gears) in running down a list before I go ahead and get new clutch
@LegendaryValky
6 жыл бұрын
Not by itself. But you'll have to empty fluid anyway when you change the clutch
@rishi5803
2 жыл бұрын
what size is that washer? does anyone know? thankyou, and great video
@anthonyhernandez1953
6 жыл бұрын
Hey bro I have the same car same problem did your 3rd gear stop popping out after you did that transmission oil change ?
@LegendaryValky
6 жыл бұрын
Yes, it did. Since I've uploaded this it's only popped out once. Which I can probably blame myself for.
@anthonyhernandez1953
6 жыл бұрын
Legendary Valky right on thank you ! The dealer I got it from offered me a tranny rebuild for 800$ but after than now I know thanks to you
@LegendaryValky
6 жыл бұрын
No problem man. Definitely worth trying first since the low cost and it's maintenance anyway
@anthonyhernandez1953
6 жыл бұрын
Legendary Valky agreed ! Thanks for the reply
@GUTSNglore296
5 жыл бұрын
Did you order your redline MT-90 online or did you buy it from a store? If you bought it from a store, may i know which?
@LegendaryValky
5 жыл бұрын
I ordered from Amazon.
@Hello_its_me_mario
Жыл бұрын
Ouch. That transmission gonna hurt
@madmarlone
6 жыл бұрын
Hope this works for me. I have a occasional minor 2nd gear grind. 3 gear popped out once on me too but it was when i first bought the car and figuring out how to properly shift into 3rd. Its weird. It avoids me from letting anyone drive my car cuz 3rd is weird.
@LegendaryValky
6 жыл бұрын
Yeah it sort of has to be just right, us owners are used to it. Let me know how it goes.
@seanpittacora9668
5 жыл бұрын
So my RSX-S is suffering from the infamous 2nd and 3rd grind and the 3rd gear pop out and I know my fluid is due to be changed. Do you recommend the Redline MT90 transmission fluid?
@LegendaryValky
5 жыл бұрын
Yeah, it's definitely a solid choice. I recently did this job again and I have royal purple synchromax in right now for the last 1k miles and it's good too, but I think I was more blown away by the redline.
@seanpittacora9668
5 жыл бұрын
Legendary Valky Awesome. Thanks for your feedback!
@96Ferno
2 жыл бұрын
How does this fair with the OEM fluid? Have the 3rd. gear grind…. 😕
@SnubBarracuda
4 жыл бұрын
I recommend using gloves. The smell of trans fliud makes me want to puke.
@SuperHector2013
6 жыл бұрын
exelent. thanx 👍
@bakersavage229
4 жыл бұрын
which intake is that btw?
@LegendaryValky
4 жыл бұрын
Injen Cold air
@adrianvega4817
3 жыл бұрын
still recommended?
@LegendaryValky
3 жыл бұрын
Yeah it's great fluid
@dragom5342
6 жыл бұрын
What was the size of the vinyl tube?
@LegendaryValky
6 жыл бұрын
Outer dimension 5/8th inch and inner dimension 1/2 inch
@dragom5342
6 жыл бұрын
Legendary Valky awesome! Thank you!
@wavymacho
4 жыл бұрын
Rsx takes 2 Qts??
@LegendaryValky
4 жыл бұрын
A little less than 2, but you need to fill it completely
@bangbang-ul6wv
6 жыл бұрын
did u just put 90w in ur Honda transmission ?
@LegendaryValky
6 жыл бұрын
bang bang 75w-90 I believe. It's what many newer 6 spds run. It's still running perfectly and many on the Honda forums use it.
@bower95
5 жыл бұрын
Alu expands when warm, you're gonna end up ripping those threads right out at some point... dont warm it up, use good oil and change it at proper intervals
@LegendaryValky
5 жыл бұрын
The expansion of aluminum on the exterior of the trans is negligible because its temperature is nowhere near that of the engine. We're not talking head bolts here. Besides, iirc the composite is stronger on parts like the tranny.
@bower95
5 жыл бұрын
@@LegendaryValky In that case, warming it up it useless? No matter the type, aluminum threads are weak, and drain bolts are removed frequently. Also aluminum has awesome heat conductivity, and the engine and trans are directly connected, promoting heat transfer. The bolts themselves are also not made of aluminium and as such will expand at a different rate than the trans case. It is well known that removing bolts from hot aluminum is dangerous. I am not here to argue that with you... Head bolts are not a good comparison... by the time you get to them, they're probably cool, and they are probably never going to be removed unless doing some work on the engine.
@LegendaryValky
5 жыл бұрын
@@bower95 The point of warming it up is to lower the viscosity of the fluid so that it drains easier. The threads will be fine, very many people warm their car for oil changes.
@bower95
5 жыл бұрын
@@LegendaryValky That was ok to do back in the days when everything iron, and oil was crappy. Nowadays everything is aluminum alloys, and oil technology has vastly improved, sludge formation a lot less prevalent. It is no longer as important as it was and is actually not advised, to avoid stripping aluminum threads. What's worse? Dealing with the headaches of mechanics tapping it crooked and dealing with a leak? Buying a new oil pan altogether? Or just having a bit of sludge... That's an easy one. If you wanna eliminate sludge, go buy some high quality, high detergent synthetic and drive it like you stole it, then dump the oil. Engine will be squeaky clean. Anyways, to each their own.
@LegendaryValky
5 жыл бұрын
@@bower95 I've never seen any examples of someone ripping threads out from removing bolts though, only on tightening them. Not going to say it's impossible but I don't think there's a real danger
@jeshuama8169
5 жыл бұрын
Hi I have an Automatic is it the same process?
@LegendaryValky
5 жыл бұрын
It's different, I'm not familiar with the process though
@Luisinho2
6 жыл бұрын
Do you have a dipstick to check how much oil you have in their? My car dont have it
@LegendaryValky
6 жыл бұрын
Nope, it's supposed to be filled all the way or as much as possible.
Пікірлер: 67