I like that you take the time to explain the exact quantity and numbers and not eye ball the process. It must have taken a lot of experimenting on your side to get the exact measurements. We really appreciate that. Thank you!
@upvibecandle
2 жыл бұрын
Thanks. Truly appreciate it. 🙏
@Stormy510
9 ай бұрын
Your video are so educational. I’m a newbie and I just couldn’t get the measurements right thank you for all you do
@scotty4899
2 жыл бұрын
Appreciate seeing the marble effect without using acrylic paints. Thanks!! Do you have a video for how you clean up and clean all your tools/supplies?
@upvibecandle
2 жыл бұрын
I do not. Sorry.
@adriannalawrence5076
2 жыл бұрын
Ouuuuuu !!!! That’s a perfect marble !!!!I LOVE IT!!!!
@upvibecandle
2 жыл бұрын
Thanks 🙏
@tradergirl7067
Жыл бұрын
great video I've made probably thousands of these over the last couple years and I've never used the electric vibrater thingy. i see some people using it .. i want one now.. . I also never use paint. I was using actual white concrete mix and add charcoal pigment. no need for titanium when you have white concrete mix.. right?.. but...then realized the white mix took way too long to dry like 20 hrs... whoa.. so the cement all and titanium while not as white as the actual white concrete mix, it dries so fast. it's awesome.. what was funny tho is your respiratory mask that you don't use. 😄 good stuff.
@upvibecandle
Жыл бұрын
Can’t tell if this is a compliment or a dis. 😂. By the way I always wear my respirator. However I quickly realized that I sounded too much like Darth Vader while filming.
@nataliabenassi6576
Жыл бұрын
Gracias muchas gracias por compartir son excelentes todos tus vídeos desde argentina
@upvibecandle
Жыл бұрын
Gracias por tu comentario y gracias por ver mis videos.
@barbr316
2 жыл бұрын
Teacher that came out super beautiful marbling. Thanks 🙏🏻 for your videos
@upvibecandle
2 жыл бұрын
Glad it worked beautifully for you.
@caitlynelle1287
2 жыл бұрын
Just found your channel today, have been enjoying your videos so much! Can't wait to make my own marble testers.
@upvibecandle
2 жыл бұрын
Glad you found the channel and thanks for watching. I truly appreciate it. 🙏
@Maganmagia
Жыл бұрын
Thak u so much from mexico
@upvibecandle
Жыл бұрын
Por nada. Ojala q regreses.
@miss_k3602
2 жыл бұрын
Now you need to get the Direct Colors pigments and marble them👍
@upvibecandle
2 жыл бұрын
Great idea but I can’t deny I love Globmarble. It lasts a long time.
@upvibecandle
Жыл бұрын
❤ My Concrete Candle Jar Course - theupvibe.com/the-winning-formula/ ❤ My Etsy Shop for Labels, Thank You & Candle Care Cards - upvibecreations.etsy.com ❤ Subscribe Now - tinyurl.com/2p9e5aph
@nit22999
Жыл бұрын
Thanks a tonne jai for another informative vedio .I in the process of starting my concrete vessel journey..ur vedios are like holy bible of concrete vessels. Love your vibe .u explain everything to the very detail it so easy for a beginner to understand.thankyou for wat u do. I have a small question. Can u do relif work on concrete vessel ?? Like say using plaster+pva glue..is it possible...or what method is possible? I want to develop some 3d texture to my vessel . wat are the possibilities.thanks for ur time.best regards
@upvibecandle
Жыл бұрын
Thanks for your lovely comment. I have never tried it but you should try it out and test a few of them to see how they perform. That is really the only way. Thanks again for your comment.
@JunIFaith
Жыл бұрын
A video about how do you clean up your mixing bowls
@upvibecandle
Жыл бұрын
Great idea!
@user-mu1xj4sj9p
Жыл бұрын
Hi! Thanks for sharing those videos 😍! Can you please tell me how and where do you clean up after? I mean the vessels where you mix concrete, the molds, the spatulas, etc.. Thank you! 🙏
@upvibecandle
Жыл бұрын
I use a bucket of water to clean my tools then wipe it off and throw away. The excess concrete gathers on the bottom. Every so often I dump the water in a hidden large concrete area on my property. As for my mixing bowl I let the concrete harden and crack it off and toss that in the garbage. Hope that helps.
@user-mu1xj4sj9p
Жыл бұрын
@@upvibecandle thank you so much!! 🙏
@Wondrouslybotanic
Жыл бұрын
How do you get rid of the extra cement that you used to mix in?
@upvibecandle
Жыл бұрын
I dump it in the garbage.
@stuartdavies9693
Жыл бұрын
Thanks that was interesting and you shared the measurements ! im in the uk we don't seem to have cementall, can you recommend an alternative thanks Stuart
@upvibecandle
Жыл бұрын
Absolutely. Try jesmonite like I show in this video here. kzitem.info/news/bejne/2pmwwIxsjayAZqA
@stuartdavies9693
Жыл бұрын
@@upvibecandle Thank you !
@pamorericsims3264
2 жыл бұрын
Thank you for this, awesome job and informative as always!!! What do you do if you have pitting in the lid?
@upvibecandle
2 жыл бұрын
Thank you. I haven’t experienced that. I’m sorry I couldn’t be more help.
@scottgray4008
2 жыл бұрын
May I ask how big is the candle mold..thank you for all the great video's
@upvibecandle
2 жыл бұрын
It’s the Amazon mold. The information is in the description.
@julieham2462
Жыл бұрын
What if You need to lighten the cement by adding white, and then want add, pink, yellow, orange etc. into the white to make a light mold? What kind of formula would You use? Using Cement-All?
@upvibecandle
Жыл бұрын
You only have a 5% addition to your mixture to add colors you want so you have to do so strategically.
@julieham2462
Жыл бұрын
@@upvibecandle Thank You!
@lanaya.h
Жыл бұрын
Hi Jai! I love this method of creating marble concrete jars! I have a question, though. I live in Dubai and Cement All isn't available anywhere here. I've got ACE Hardware nearby and they sell Quikrete 'Ready-to-use' concrete mix and Quikrete 'Fast-setting' concrete mix. Can I substitute Cement All with one of that? If so, which of the two options do you think is best? Once again, thank you so much for creating such amazing videos. You're a heaven-sent!!
@upvibecandle
Жыл бұрын
Hi Lanaya. Yes you can use Quikrete fast setting. There is an approximately 24 hour waiting time to demold so if you can get your hands on Cement All or other alternatives like this video here... kzitem.info/news/bejne/2pmwwIxsjayAZqA you will do much better. I hope that helps.
@lanaya.h
Жыл бұрын
@@upvibecandle omg yes thank you so much!! And upon doing additional research, I found that Earth Safe Finishes preserver/sealer isn’t available here either. What alternative should I use for that?
@upvibecandle
Жыл бұрын
@@lanaya.h Try Rutland or Eco Advance
@kamikadze1300
Жыл бұрын
Hello! I really like your videos! I have a question about making marbled vessels with acrylic paint - I noticed that after unmolding a ready vessel my hands are dirty and the vessel is like "chalk". I'm using white mix + black paint. What might be an issue for the vessel leaving chalk-like dust on my hands (both white and black), I'm not sure what I'm doing wrong?
@upvibecandle
Жыл бұрын
When cement dries, it loses water and becomes hard. The chalky feeling on your hand is because of the chemicals in cement reacting with water and forming solid substances. Some of these substances can stay on the surface and feel powdery or dry when you touch them. Once it cures and you seal it you should be good to go.
@kamikadze1300
Жыл бұрын
@@upvibecandle thank you for the reply! I'll try to apply more coats of sealer then! It still leaves dust on my hands after 1 coat
@upvibecandle
Жыл бұрын
@@kamikadze1300 I am confused. What cement mix are you using? How long has your creation cured? It might be something else but I need to know the answers to the questions first.
@kamikadze1300
Жыл бұрын
@@upvibecandle I'm not from the US.. I'm using a mix based on portland cement, it's been curing for a week or so.
@upvibecandle
Жыл бұрын
@@kamikadze1300 It's hard to tell what's going on as I can't see your work but it is very possible it's efflorescence. Try washing as much off as possible and then seal. Efflorescence is when white powder forms on surfaces like concrete due to water carrying salts and leaving them behind as it dries. It's usually harmless but can indicate too much moisture and requires cleaning and fixing any water issues.
@sandramanning1424
10 ай бұрын
Where did you get the mold and lid at
@upvibecandle
10 ай бұрын
collabs.shop/c4gajm
@onyaeonyae7
2 жыл бұрын
Jai, do you ever use metal spoons? I sometimes use plastic spoons, but wasn't sure if cement had issue with metal properties
@upvibecandle
2 жыл бұрын
Hi Jasmine. I do use metal spoons sometimes but I am very partial to my spatula. Not sure what my fascination is with it but metal should work just as fine.
@onyaeonyae7
2 жыл бұрын
@@upvibecandle thank you tons!
@phillipremondini5617
Жыл бұрын
Is it me or did I think Jai sniffed a little too much Cement where he edited this video. Thumbnail says Mable Effect. 😂
@upvibecandle
Жыл бұрын
Not sure I understand. It says marble on my end. Maybe you've been smoking a bit too much Cement All while trying to look for ways to diss. 😂😂😂
@phillipremondini5617
Жыл бұрын
@@upvibecandle that's so messed up! I swear it said Mable!!! I think I did one too many shots of cement😅
@hilaryquinn8673
2 жыл бұрын
Hey! Great stuff! Check the title of your video. There’s a typo in the title!!
@upvibecandle
2 жыл бұрын
OMG thank you so much. It wasn't in the title... It was even worse. It was in the thumbnail. Wow great catch... Thanks again.
@hilaryquinn8673
2 жыл бұрын
@@upvibecandle Ha! I’ve never done a video, so I was calling the thumb nail, the title. 😀Your content is great!
@upvibecandle
2 жыл бұрын
@@hilaryquinn8673 thanks but a special THANKS to you for catching it for me.
@karimarbouche9764
2 жыл бұрын
Can you teach usado how can wé make marble by other poudres?
@upvibecandle
2 жыл бұрын
I will add that to the list. Thanks
@Onemoretime.b
2 жыл бұрын
Hello Can you please tell me what the name of your vibration machine? Thank you isabelle from Belgium
@upvibecandle
2 жыл бұрын
Hi. The link is in the description.
@sarahtalbert1485
Жыл бұрын
How do you know what percent you can add for each pigment?
@upvibecandle
Жыл бұрын
The pigment directions usually say. 5% is maximum for most.
@david-di3hx
Жыл бұрын
is that earth safe sealer importnant?
@upvibecandle
Жыл бұрын
A sealant is important not necessarily ESF.
@david-di3hx
Жыл бұрын
@@upvibecandle thanks, and what his exact function?
@upvibecandle
Жыл бұрын
@@david-di3hx Concrete is porous. It blocks things from exiting and penetrating back in. Watch this video. kzitem.info/news/bejne/1Gljsox9hJiIY2k
@david-di3hx
Жыл бұрын
@@upvibecandle allright thanks a lot. My last question is, why that molds are so expensive? I saw them for a few dollars only
Пікірлер: 74