Hi Claritone your sides rack fill my top table design thanks a lot
@THZORROMUSIC
Жыл бұрын
nice one 🎉 next one please in centimeter 😂
@tracykimball6919
5 ай бұрын
Very nice desk. Love it, excellent job!
@angiesuricata
4 жыл бұрын
i love this video, because it is really fun the process: designing, cuting, painting and setting up all the gear.=).
@twotoned6823
3 жыл бұрын
Thank you. Nice job!
@aeneasremotemixing7381
3 жыл бұрын
Great job
@happyboar1019
Жыл бұрын
Very good job … only with handy tools 👍
@911truthfarmer
4 жыл бұрын
Nice and simple plan, well done!
@tubefixxer
10 ай бұрын
A good build, thanks 👍👍
@DarthMulls
Жыл бұрын
I can dig it!!!! Dope Thanks
@WolfTrap1000
3 жыл бұрын
Good simple design. Looks very good
@Timjvidoes
3 жыл бұрын
NICE man! So, now that you've been at the desk for a bit, are there any things you would change?
@ClaritoneAudio
3 жыл бұрын
Hey, I would maybe have gone with less depth on the front part of the desk surface, it's a bit of a stretch for me to reach anything at the top few rack spaces That's the main one I sometimes think of
@klubstompers
3 жыл бұрын
@@ClaritoneAudio You could cut a section out of the desk top, in the front middle, so that you can scoot in closer, and just re stain/poly the cut. Round the outside corners on the cut, so you don't have sharp ends. Currently building a desk, and really like how you have the rack accessible from the top. Looks real nice man!!
@AI-Consultant
2 жыл бұрын
@@klubstompers how would you round the corners? whats the name, or even better make/model of that kindo of router I think its called?
@klubstompers
2 жыл бұрын
@@AI-Consultant Just draw a design on the top of the desk, cut that out with a jig saw, and then go around it with a router if you want to smooth it out. You could use a "flush cut round over bit" if you want.
@Compumon27
2 жыл бұрын
I’m building this. Will post when finished. Thank You!
@TheRealTMajor
3 жыл бұрын
I appreciate this A LOT!
@ClaritoneAudio
3 жыл бұрын
+TheRealTMajor 🙏
@klubstompers
3 жыл бұрын
Tip: If your using a level to level and plumb your project, you have to make sure what it is sitting on is level, or you wont be square or level when it sitting on a level surface like your floor.
@easternavstudio5889
3 жыл бұрын
great video
@ssidhu
4 жыл бұрын
looks good
@tonyharp2009
6 ай бұрын
Unfortunately I can't download this nice design. I click the links, like the things and check the boxes, then nothing happens.
@davidevans1420
3 жыл бұрын
Quickly becoming one of my favorite KZitem channel. Very nice Desk/Rack. I think if you have the tools, time and craftsmanship, this design is the way to go. Wanting to build the two side units for a mastering setup. Might extend to 12 rack spaces. Reshaping the side board slightly and applying the 1" X 8" perpendicular to the rack angle will allow for two additional rack spaces at the top. Thanks for posting...
@edwindelao4257
Жыл бұрын
I did all the steps to get the plans but I still haven’t gotten them what should I do?
@TomFlynnOfficial
4 жыл бұрын
How do you figure out the angle of the rack units?
@TheRealTMajor
3 жыл бұрын
I used an angle finder and it came to 65 degrees.
@ClaritoneAudio
3 жыл бұрын
this changes based on the thickness of your desktop material.. you'll have to adjust all the cuts if you want to change the angle more than it is.
@lmm512
2 жыл бұрын
Amazing design! only issue is when I click on the plans it says 404 page not found, anywhere else I c could go to find them? Thanks so much!!!
@obangamuzik
2 жыл бұрын
I subscribed to your KZitem and Facebook page but still ant unlock the plans to the desk
@kirstensray
4 жыл бұрын
I love this design because I'll be moving soon and this allows you to have the desk in manageable pieces. Thank you so much for the plans. I do plan to build this desk. The modifications I'm thinking of are to only have 6 rack spaces per side instead of 10 per side. And also to make the desk top a couple of inches shorter. I'm not sure how these changes will affect the stability of the desk, though. I may even put the two sides together with no space in-between to make it more compact. (like the Bazel Raystag desks) and then add a ledge behind the racks to hold the video monitor. This guy did something similar to this desk in Europe, using metric measurements with angled side pieces - kzitem.info/news/bejne/rIp92J6hg6Vjmqw.
@tonypizzuti9158
2 жыл бұрын
What’s the link to the plans? When I try to unlock it the link in your bio, it won’t allow me? I subscribed to the channel
@eman0828
3 жыл бұрын
How's that desk holding up? I have an Argosy Console Halo. I love the build quality and the quality of the material that justifies its price tag.
@ClaritoneAudio
3 жыл бұрын
Hey there, The desk is holding up nicely, racks are becoming fuller as time passes and the workspace is large. Beautiful desk you have, of course with the budget for a nice desk you can't go wrong :) Thanks for watching
@Skiroy
4 жыл бұрын
Awesome. Did you have any issues with the paint sticking to those screws?
@subelementrecordings2692
4 жыл бұрын
Nice design. How much of a cost difference would you say there is between this and a ready made desk?
@ClaritoneAudio
4 жыл бұрын
+Sub Element Recordings desks here in Canada start at around 1000 for the absolute cheapest options made for studios. something with this size and rack space would be anywhere from 1500$ and up + the shipping costs of ordering a full desk :) so at least 50% cheaper I would say.
@subelementrecordings2692
4 жыл бұрын
@@ClaritoneAudio That's a significant difference. Thanks for the info. I'm in the market for a new desk and have been playing around with the DIY option. I like this design. I would likely make a small modification for a touchscreen if I went this route, but this is probably the best DIY design I've seen around. Great work! Cheers!
@ClaritoneAudio
4 жыл бұрын
+Sub Element Recordings totally ! and that's the beauty of it, you can play with it based on your needs and available materials. thanks, I'm very glad to hear that! good luck with yours, cheers !
@jamesjett1561
2 жыл бұрын
How do I download the plans? It keeps telling me to subscribe even though I’ve already subscribed.
@SamCliffeMusic
3 жыл бұрын
What are the 3 way studio monitors in ur intro? Adam audio?
@ClaritoneAudio
3 жыл бұрын
+Sam Cliffe yes, my 3 ways are Adam A77X
@SamCliffeMusic
3 жыл бұрын
@@ClaritoneAudio cheers my guy brw the desk build was suck keep it up
@ClaritoneAudio
3 жыл бұрын
Cheers to you too! I'm assuming you meant sick hahaha 🙌
@SamCliffeMusic
3 жыл бұрын
@@ClaritoneAudio Yh lmao autocorrect did me wrong there
@billbradleymusic
8 ай бұрын
😂 MDF? Man, diy has taken a new turn. At least you got great monitors! I guess your a nice guy for giving away the plans, for an email because nothing is free. 😂😂😂
@tubefixxer
2 жыл бұрын
Hi, the link to the diy plans is not working, can you email it to fix the link. Thanks
@risingempireentertainment
3 жыл бұрын
bro, mic in front of your mouth the whole time. :). especially being a sound engineer. great video
@ClaritoneAudio
3 жыл бұрын
Yeahh I can respect that haha, it's just not always easy with recording video without moving around the whole studio for the intro clip. Cheers and thanks for watching
@Nuckoqoostugua
3 жыл бұрын
Cable management bruh. I think you might wanna fix em
@Bradys001
3 жыл бұрын
Great video .. I built a desk using your plans but made it with top shelves for my monitors as I don’t have room for separate stands .. I also used a solid oak desk top .. it looks great .. thanks again for your video, it inspired me to make my own desk without spending a huge amount of money
@drogers0033
3 жыл бұрын
Hey man sorry to bother you but any chance you could email a set of plans the link above doesn't work for me my email is Drogers00@live.com I would really really appreciate it id like to build this .
@vpetroi3
2 жыл бұрын
How much did it coast you ?
@rockstardvnt
Жыл бұрын
Do you have any pics you wanna share?
@Bradys001
Жыл бұрын
@@vpetroi3 sorry for the HUGE delay in responding …. If I remember correctly, I was around £350 all in but this included the oak worktop … you could cut the cost with a cheaper worktop … hope this helps
@christophersanders7374
3 жыл бұрын
Just what I was looking for - straight to the point and easy to follow. Thanks!
@guyhometal
2 жыл бұрын
Hi, your site is driving me crazy. I am unable to download the Desk studio mount file. It's amazing to let that happen. I am so sad. :/
@chrisharris50
3 жыл бұрын
Your build is better than the store units!
@AdamTheAd-vanc3d
2 жыл бұрын
That is amazing I'm so inspired to build something like this for myself now :-)
@kuttymayn123
2 жыл бұрын
I can't unlock the link to the plans. I've subscribed and visited FB page. Help!
@xbunnycreamx4655
Жыл бұрын
How do you download the plans. I hit the link and subscribed and nothing happened. Thanks
@jaykay6412
2 жыл бұрын
finally someone built a desk that placed the computer monitor below the stereo sound field. nice work. I'll use this to build my new one rt now
@1MLBOF225
Жыл бұрын
How do I get the plans??? I done everything that it asked and I still haven’t gotten the plans…
@davehannah9894
Жыл бұрын
Why is getting the link so difficult on my iPhone seems simple but it keeps kicking off
@GersonGbj
2 жыл бұрын
i see a Sub bass, how is you setup in daw with sub basS? trabks, goods videos, great!
@simonphebert
Жыл бұрын
Great desk!!! The link to download the drawings is not working.
@thegiantratthatmakesalloft9415
2 жыл бұрын
Nice video, but the camera angling could do better
@finsandtonics
2 жыл бұрын
Tried to download the plans- link not working?
@milanjankovic4925
Жыл бұрын
I subscribed but can’t access the plans..
@cadjano
3 жыл бұрын
Really impressive result!
@boomunit604
4 жыл бұрын
very nice !!
@DaasmangiDIGBYHoleong
4 жыл бұрын
great stuff
@officialWWM
3 жыл бұрын
What are these "inches" you speak of? It's 2021, it's time America caught up with the rest of the world!
@tubefixxer
2 жыл бұрын
This is the US, our standard is inches not mm. We speak English, not Spanish, Russian, French or any other language. If you don’t like it stay out of America!
@lejuanhaggins8052
3 жыл бұрын
thats dope im going to try it myself.
@terrytimberlake8926
4 жыл бұрын
Brilliant
@itumelengriba8060
4 жыл бұрын
This is what I've been looking for. Great work!!
@jameslane2402
4 жыл бұрын
great job.
@officialWWM
10 ай бұрын
Your desk is beautiful! Nice job. I’m going to try and build it!
@RonnieVDrums
2 жыл бұрын
Can you send me the plans ? I followed the lnks but still can't unlock it.
@TechTraction
2 жыл бұрын
Totally worth building it yourself. Pre-made is probably quicker but I've found that you never get exactly what you want. You always have to adjust your personal setup to what a desk manufacturer allows. Currently I'm working off a basic fold out table so I can figure out what works for me before I build something similar to what you have. Nice video and nice desk. Thanks.
@kenb2010
3 жыл бұрын
You save 2500 bucks buddy
@ronflorentine4904
2 жыл бұрын
Great vid and really helpful for us studio guys on a musicians budget. Could you add rack spaces to the 2 front sides of the desk to accommodate more rack gear? How many inches is just the extended front part of your tabletop, where you rest your mouse and arms.
@greggsonic
4 жыл бұрын
AWESOME!!!!! \M/
@Lars-Andersen
2 жыл бұрын
Thanks for the inspiration. I am planning on building a desk for my studio, but will probably not make so much space for outboard gear, as I want to have space for two screens and have reduced my outboard gear to a bare minimum.
@finsandtonics
2 жыл бұрын
Def gonna build this, with some modifications. Going to make it 8ft with an 18” right return and a 24” left return and a rear cable management channel. Will send the pictures when done!
@papa_da_engineer
Жыл бұрын
Exactly what I was looking for 🤙🤙💯💯💯✌✌🎶
@sangteahrangkhawl3456
3 жыл бұрын
Looks great.. I'm planning to build one U shape studio desk.
@finsandtonics
2 жыл бұрын
So, we nixed the left and right returns- simply made it an 8x4 desk. Finished the cabinets today, sanding and staining next -
@MelodeusForever
Жыл бұрын
nice desk build but its not free if I have to give my email for it :) free would be putting the direct link here!
@musicjazzvez
2 жыл бұрын
I will like to build my studio desk. Thank you for sharing!
@djsadiqqcruz9669
3 жыл бұрын
Thanks man I build one whit your help thanks
@bmc2266
3 жыл бұрын
Nice desk, I'll make mine base on this design. Just a tip as I'm a construction worker. Using a leveling tool is fine if the reference surface is level. I have learned that the hard way at my first job site years ago! That balcony propably have a small inclinasion toward the outside the help the water evacuate the oposite side of the house. This one look sturdy, but you never know. Always check your reference surface as a mixing eng. use references tracks when using a leveling tool.
@LandofJaker
8 ай бұрын
great approach, I would recommend using carpenters glue where you were running the cross pieces
@sekritskworl-sekrit_studios
Жыл бұрын
NICE!!! I'm trying to figure out how to do a build around sit/stand desk kits.
@purecountry70
3 жыл бұрын
I need to build a Studio Rack , I think its called side car. would you have any plans for his
@tonycarpenter-Makzimia
3 жыл бұрын
Thank you for sharing, great job. Good starting point. I just need to allow an 88 key draw on it too.
@johnmooney9016
Жыл бұрын
Love the design, are the plans only in the video? Do you have any downloads for dimensions?
@matissev2530
11 ай бұрын
Nice to see someone else from the Montreal area! Merci pour le plan ;)
@criscorvetes
3 жыл бұрын
Can you send me the plans please? I can't do it with the link, thanks
@flipsergio2985
3 жыл бұрын
Great job nice desk
@anthonygoines1466
3 жыл бұрын
great job and good info
@Marsaoui
3 жыл бұрын
Nic
@kirstensray
3 жыл бұрын
Step 2 shows and angled cut from the bottom foot (15 3/4) to the top arm (11 3/4). In the video this cut looks straight. Is there a reason you chose to do it straight instead of like the plans?
@ClaritoneAudio
3 жыл бұрын
Hi, these plans were redrawn nicely after I built them from the original plans i scribbled down.. This was a change that was done then. If I would redo it i would add that angle as it looks nice and would also be more sturdy for supporting the countertop (not that there is sturdiness issues in either case) Hope that helps
@TheRealTMajor
3 жыл бұрын
Good morning. I want to say that I followed your video and although I messed up on a few cuts and especially the rack space. I am in Love with my desk. Thanks for the video and the motivation.
@ClaritoneAudio
3 жыл бұрын
+TheRealTMajor right on! thanks for the cool feedback and enjoy your new desk 😊
@alonsoundesign
2 жыл бұрын
nice intro 🎵
@mardosavage6426
2 жыл бұрын
Nice 👍
@derkhedemann5606
3 жыл бұрын
nice
@hitradio875
2 жыл бұрын
nice job !
@Phantommxr
2 жыл бұрын
Nice!
@THBakker69
3 жыл бұрын
It was at the time you started with the primer and said you applied 3 layers, I decided €300,- for a ready made desk was reasonable...
@ClaritoneAudio
3 жыл бұрын
If you can link me to a 300$ desk with 20 u of rackspace and a large work surface I'd be all ears :) but yeah it's a long process with some sweating involved
@THBakker69
3 жыл бұрын
@@ClaritoneAudio Yes, it’s not enough, but 600+ euro would be good for me too, not having to do that labor. (And the result I know I am capable off ;) )
@djmattpositive
2 жыл бұрын
if you can link me to anything interesting/worth doing/revenue generating/fun/etc that is easier than applying three layers of non-oil based primer, i'd give you my ears. also you know what else is a long process with some sweating involved?? probably lots of things. i'm lazy AF but taking the time to invent ready made desks for 300 euros that don't exist with 20U of rackspace sounds like harder work than making writing this comment. nice desk btw
@steezekings2756
3 жыл бұрын
That's amazing. I'd like to build but I can't find the bamboo counter that deep. Where did you find yours?
@ClaritoneAudio
3 жыл бұрын
Hi, I'm from Canada so I'm not sure if it will apply, but it was purchased at the hardware store Rona. If you find a piece that is slightly less deep it could work with little or no changes to plans. Width can also be adjusted of course, that's as easy as spacing the two bottom rack/support pieces further apart Good luck and hope you can make your own plans with what you find locally 🙏
@steezekings2756
3 жыл бұрын
@@ClaritoneAudio Thanks!
@illestofdemall13
3 жыл бұрын
Def not 3 inch screws. Looks like 2 inch.
@hankslapper
Жыл бұрын
Nice simple design
@AI-Consultant
2 жыл бұрын
I would have kept this desk looking natural wood, that looked nice even when the primer was on it. Black made it look boring.. Anyway, i wonder what kind of wood is the lightest wood to use to make this?
Пікірлер: 130