I watched the video till end, and it turned out amazing🙌🍀💯💯💯 So from my understanding, only this thin glass stops the IR lights?🤔
@FixitEasyDIY
Жыл бұрын
Thank you brother 🙏 Yes that thin glass is stopping 99% if the IR light. Therefore I had to remove it. This was the hardest part of the procedure.
@vladkata2906
Жыл бұрын
Hello, very nice video, keep it up, I follow you on both channels.
@FixitEasyDIY
Жыл бұрын
Thank you brother 🙏🙏🙏
@moya9450
4 ай бұрын
@@FixitEasyDIY If we use VR glass and put phone inside it you can use it outdoor without anyone notice it. Now the light of the phone's screen is too high. With VR glass it's too perfect
@davidxiu8020
8 ай бұрын
fantastic. 👍 you can fine tune the footage by adjusting the white balance & exposure settings of the camera, if it has a manual shoot option.
@FixitEasyDIY
8 ай бұрын
Thanks for the hint. I am actually not that good at shooting videos, but this sounds logical. I will definitely try that. Thank you again 😊
@Edward_Black_Rose_BG
Жыл бұрын
Nice project my friend!
@FixitEasyDIY
Жыл бұрын
Thank you brother ☺️ I was amazed by the result ☺️
@Bulgar1us
Жыл бұрын
I don't know why but watching it I remember for muvie "Predator" 😂😂😂
@FixitEasyDIY
Жыл бұрын
Actually it has something to do with it ☺️☺️
@battedtomcatnlnl153
5 ай бұрын
Why no partlist?
@FixitEasyDIY
5 ай бұрын
I should have share it. It is basically random stuff from my workshop. IR module for night vision camera ( the round LED thing) 12v battery from old laptop cells with BMS circuit and a switch.
@REdG_Original
10 ай бұрын
"That is very exciting. However, I wonder about one thing: Is it possible to build it without modifying the smartphone camera, so that the smartphone camera remains the same and the night vision camera is added with an external case?"
@FixitEasyDIY
10 ай бұрын
Actually it cannot be made without modifying the camera. The main reason for this is because the IR filter should be removed from the lens. It is a hardware and we must remove it manually :)
@omerergincam5593
7 ай бұрын
App store night camera app 👍
@Wastland-vehicle-art
Ай бұрын
@@FixitEasyDIYit can you just have to get a godly bright ir light
@AlyxGlide
7 ай бұрын
surely a USB IR LED could be easier 😂
@FixitEasyDIY
7 ай бұрын
That's a good idea. I wanted to use max power, delivered by 12 V module and it was dirt cheap on AliExpress ;)
@TechSight-r6p
5 ай бұрын
Did this phone had Autofocus.
@FixitEasyDIY
5 ай бұрын
Yep. It had, but I've removed it when displaced the IR filter. It would be ideal if I could manage to keep the auto focus.
@Geopelia_Elec
Ай бұрын
For Xperia Z2 you can keep focus ability alive. 2 nights ago I destroyed it but I learnt that camera sensor structure 😅, it needs hot air from back to melt solder and removing its case easily and IR filter is behind of glass and Auto focus system = magnet + copper wire. @@FixitEasyDIY
@FixitEasyDIY
Ай бұрын
@@Geopelia_Elec wow that is actually a very good advice. Thanks for letting me know 😊
@Geopelia_Elec
Ай бұрын
@@FixitEasyDIY your welcome bro , I am sorry for bad English. I wanted to say the structure was : Image Sensor => IR filter => some flexible wires to make glass to have levitation condition => glass and coil around of it. If we remove Sensor from back , we can have full access to IR filter and we do not need to go more further inside.
Пікірлер: 24