You're by far my favorite pond guru and I can't wait to put most of your set-up into action. Thanks for everything you do!
@Wrighty
8 жыл бұрын
+David Foley Hi David, and thank you. Your very welcome. If you need to know more it's all and more on my website diypondfilters.com Thanks again, Terry.
@Nig6aNate420JMD
6 жыл бұрын
You are truly brilliant. I'm in the process of setting up my very first DIY pond. It's about 16'x16' average 3feet 4 and a half at it's deepest your videos have been an inspiration since before I broke ground. I thank you for what you do.
@1habicher
6 жыл бұрын
One of the finest presentations and I have now seen so many from all over the world. You Brits have got it right and it is a fine hobby worldwide! I like it and am 80y so it must be good! Richard in Australia
@Wrighty
6 жыл бұрын
Thank you Richard, very much appreciated. Your still young mate and you've a lot of ponding to do yet. Terry.
@aileenpettigrew
5 жыл бұрын
Wow, thank you so much for this! I am planning a koi pond but have been hesitant at the price of skimmers - $400 for a bucket?!?! and was totally confused by other DIY skimmers I have seen on youtube and elsewhere - till I saw this video! You made it so clear and concise and now I am pretty confident I can do this myself and hook it up to my skippy filters! will be buying your instructions for sure.
@JasonGambacort
6 жыл бұрын
Thanks for taking the time to share this Wrighty! Certainly gives me some ideas of my own. Thanks again from Ontario Canada. :)
@Wrighty
6 жыл бұрын
Hi Jason, your very welcome. Terry.
@Bandit_6oo
4 жыл бұрын
I have only been keeping koi for a few months but I have learned so much from your videos, thank you so much.
@Wrighty
4 жыл бұрын
Hi Jamie, thank you for your kind comments, and your very welcome, Terry.
@maxellison55
9 жыл бұрын
Very very inventive and well thought out!! Keep up the good work Wrightly!
@taherakhan7044
4 жыл бұрын
Thanks Wrighty! I am new to this and learning fast. This is exactly what I was looking for! Last year put in french drains in the top end of the garden (the garden office is now inplace), down the sides (we are on the side of the hill) and from the water captured under the inground trampoline (don't ask!). The output is not connected to anywhere so when it rains, the garden takes some (suffering from hard clay) and the rest, well. Anyway, started to design a pondless/rill and want the french drain to feed into it. Issue is capturing any crap. This is our solution! The next problem is making it :)
@Wrighty
3 жыл бұрын
Hi mate, sounds like quite a project. Hope all goes well for you mate, Terry.
@woodsman2564
7 жыл бұрын
Great design! Great instructions! Thank you for posting it.
@Wrighty
7 жыл бұрын
Thank you. very much appreciated. I did move to the middle size basket as I was emptying the small one twice a day but the middle size one works fine. Terry.
@jenniferfeeney3406
3 жыл бұрын
Thank you so much for your video, it simplified the process and every step was very clear! Gave me the confidence to build my own and save many many pennies! Great sense of accomplishment! So kind and generous of you to take the time to film and post! Thanks so much! 👍😁 Jenny from Banbury, England!
@Wrighty
3 жыл бұрын
Hi Jenny, thank you for your kind comments, it's very much appreciated. Good to hear you enjoyed the video. Good luck with the build. Thanks again, Terry.
@fixplanes
8 жыл бұрын
Great video and explanation. Thank you for posting! Looks great!
@Wrighty
8 жыл бұрын
+fixplanes Thank you, your very welcome. Terry
@barryspiers7022
9 жыл бұрын
Another great vid Terry, thanks for sharing! PS, my pond is still not clear and I'm having to clean barrels 1 and 2 more or less daily, there must be an awful lot of crud in the pond, we'll get there......... Barry
@Wrighty
9 жыл бұрын
Barry Spiers Hi Barry, If you're filters are catching the dirt there working m8. Hang in there it will come good. Terry.
@oaksho
9 жыл бұрын
Another great video Terry full of really good information and a quality build once again. I'm off to collect the parts today to start on the three tub filter you posted a while ago. Thanks for sharing this one. All the best Tony
@Wrighty
9 жыл бұрын
***** Hi Tony, You're more than welcome m8. Good luck with the build m8. Terry.
@22lr_plinking
7 жыл бұрын
Either I get to much water in , or it doesn't get enough for the pump lol. I will keep messing with it. Great video. Thanks
@wonderwend1
8 жыл бұрын
Fantastic explanation, great design. I'm gonna make one!! I have THE perfect spot for one. I have a few sycamore trees near my pond and when the wind blows in the wrong direction I end up with a ton of crap in the pond so this will be perfect. Thank you for the info to find instructions on the face plate fitting too. Thanks again! Wendy
@Wrighty
8 жыл бұрын
+wonderwend1 Thanks Wendy, Your very welcome. You can get the plans to build it on my website if you need them: diypondfilters.com Good luck with the build. Terry.
@wonderwend1
8 жыл бұрын
+Wrighty Lovely, thanks! I just name dropped you on the Pond Digger's video comments ;)
@Wrighty
8 жыл бұрын
+wonderwend1 lovely thank you. He has subscribe to me bless him.
@Dumdum888888
5 жыл бұрын
Great job. Your pond is stunning. 👍🏻👍🏻
@Wrighty
5 жыл бұрын
Hi mate, have you seen my new pond? kzitem.info/news/bejne/mXymwKSOmHphmWk this is the last one in my pond build videos that shows the finished pond. Thanks, Terry.
@chriswilliams5780
7 жыл бұрын
Excellent idea terry very well explained I shall be making one myself ready for next year keep up the very informative videos Chris
@Wrighty
7 жыл бұрын
Hi Chris, Thank you. I do show my new version of the skimmer in my pond build videos: kzitem.info/news/bejne/16GdmXaXhXhqfHY Terry.
@cement.stilettos
9 жыл бұрын
Great idea and well-explained. Many thanks for the tips!
@Shampew
2 жыл бұрын
So glad I found your video. I'm planning to create a very similar DIY skimmer, and this is great to see in action. Well done!
@Wrighty
2 жыл бұрын
Thank you, very much appreciated. Terry.
@BuildBeach
8 жыл бұрын
Well done! And thanks for sharing. All the best from across the pond...
@Wrighty
8 жыл бұрын
Your very welcome. Have you seen my website: diypondfilters.com Terry.
@BuildBeach
8 жыл бұрын
+Wrighty I'll definitely check it out. My site is www. BuildingYourOwnPrivateBeach . com. There is a video in there I made on to make a floating pond skimmer, and a couple on bio filtering - that you may find interesting? All the best...
@StevenACulbreath
8 жыл бұрын
Hi Wrighty, enjoy watching your tinkerings with your pond. Good bits, always. Greetings from Tampa Bay, Florida!
@Wrighty
8 жыл бұрын
+Steven A. Culbreath (Abundant White Light) Hi Steve, Thank you, I do enjoy doing these little bits and piece. Keeps my brain active. Thanks again, Merry Christmas and a Happy Ponding New Year to you and yours. Terry.
@deeUn23
8 жыл бұрын
NICE..! cant wait to build mine..
@BeOutThere
8 жыл бұрын
I have been racking my brain to come up with a good skimmer. This put me on the right track. I want to make a floating one as my water level fluctuates with no auto refill. I think I can figure that part out.
@Wrighty
8 жыл бұрын
Hi, You can get the full detailed plans on how to build this skimmer. There in the shop on my website diypondfilters.com if that would help at all. Good luck with the build. Terry.
@victorialarvin9633
5 жыл бұрын
Fantastic videos! inspirational. Thank you for sharing with everyone.
@Wrighty
5 жыл бұрын
Hi Victoria, thank you for your kind comments. Very much appreciated. Terry.
@robleaf6940
Ай бұрын
Wow that is an amazing build. You are very innovative 😊
@Wrighty
Ай бұрын
Thank you, very much appreciated. This was quite some time ago, check out my latest DIY RDF build: kzitem.info/news/bejne/yn-o1KCQrHdlaqA take care, Terry.
@citrumpet1
2 жыл бұрын
You must have been a plumber by trade you are so good at fittings.
@Wrighty
2 жыл бұрын
Hi, no mate, just a simple diy'er. Have you seen my new RDF build: kzitem.info/news/bejne/2KRquIptsZRza44 thanks, Terry.
@youngbuck23
4 жыл бұрын
Wow, great video! You explained it well and it works perfect for me. Thanks for making this video mate!
@Wrighty
4 жыл бұрын
Your very welcome, Terry.
@markbirchall2696
9 жыл бұрын
GREAT design and I can afford it! The best one on youtube for my application, by far. What part of the world are you in M8? Thanks for not wasting time explaining also!
@Wrighty
9 жыл бұрын
Mark Birchall Thanks Mark, I'm in the UK, south Lincolnshire. Terry.
@neilblundz807
6 жыл бұрын
Just brilliant 👍
@syedshawkethussainrizvi9503
2 жыл бұрын
Very good video and I keep on watching it I have decided to make my own rather than buy keeping my finger crossed
@Wrighty
2 жыл бұрын
Good luck with the build. I hope all goes well for you. Terry
@kingjeffishere
4 жыл бұрын
Had to subscribe, awesome pond! You've just inspired me to get some work done on mine this weekend!
@Wrighty
4 жыл бұрын
Thanks mate, I have loads of videos here, and a lot on building things for your pond. My latest is a protein skimmer, released yesterday. Thanks again, Terry.
@royormonde3682
5 жыл бұрын
That's great, nice work..... you could stick an overflow on the side near the top where you'd like the water level to max out at, that way rain won't effect the level of the pond. I've diverted mine down a dry river bed to my fence line, I even put in a couple collection pools in that the birds love to bath in
@Wrighty
5 жыл бұрын
Hi Roy, That's a good idea. I did think of fitting an overflow, but we were moving house soon so I didn't bother. Thanks, Terry.
@Fishaddict1970
4 ай бұрын
Most excellent job!!!
@Wrighty
4 ай бұрын
Thank you, very much appreciated. Terry.
@jamesbaker9788
8 жыл бұрын
awesome video and beautiful garden and pond
@Wrighty
8 жыл бұрын
Thank you James for your nice comments. I will be starting my new pond build next week and making videos of the build. If your interested you can subscribe and you'll get a notification from KZitem when I release the videos. Terry.
@calebross4516
7 жыл бұрын
lol I'm trying to make a elbow skimmer for my water garden but my on,y worries is I'm gonna have water lettuce and water hay arch and frog bit so I'm trying to make it a correct angle or find ways to keep the floating plants in place but anyways gj
@stevenanderson120
5 жыл бұрын
Brilliant idea. Great skimmer.
@Wrighty
5 жыл бұрын
Hi Steve, Thank you, very much appreciated. Terry.
@belindafalgout1675
2 жыл бұрын
Very nice build!! Thanks for sharing 👍👍
@RicksAquariumsuk
8 жыл бұрын
your a star mate thank-you
@joshuaherrera7443
8 жыл бұрын
hello wrighty, i had a question, does the water from your skimmer go right back into your pond or to your filter system? Thank You
@richardwhite3521
4 жыл бұрын
You’ve got some next level diy skills.
@Wrighty
4 жыл бұрын
Hi Richard, thank you. Have you seen my latest build. kzitem.info/news/bejne/2KRquIptsZRza44 thanks again, Terry.
@Harleywolfman01
3 жыл бұрын
I am building the same skimmer for my pond. Great idea! I will let you know how it turns out. Thank you
@Wrighty
3 жыл бұрын
Your very welcome Jd, let me know how it goes. Have a look at my latest skimmer build. Build: kzitem.info/news/bejne/xH2r0o5pbqWbjaw Install: kzitem.info/news/bejne/q6WMspxukYxopqQ Thanks, Terry.
@mattsonhobbies6966
3 жыл бұрын
Beautiful fish. Alot of useful information thank you 👍
@Wrighty
3 жыл бұрын
Thank you, very much appreciated, Terry.
@steve-qs1zf
8 жыл бұрын
fabulous love the skimmer have u got any ideas on a skimmer for a raised pond thanks again steve
@Wrighty
8 жыл бұрын
Sorry, no I haven't at the moment, but I will look into it when I have time. Thanks, Terry
@reytard2092
3 жыл бұрын
I was really frustrated I did not mot know what to do I’m so glad you made this video thank you I will send send my results if you would like to see them
@Wrighty
3 жыл бұрын
Glad to help. good luck with the build. I did upgrade the skimmer to the next size up with the basket as the small one filled too quick. Terry.
@McAmber
6 жыл бұрын
Awesome DIY skimmer! Thumbs up for you
@Wrighty
6 жыл бұрын
Thank you, very much appreciated. Terry.
@jerrychetty2524
2 жыл бұрын
Allrighty that was a very good project, Wrighty. You are awesome, thanks
@Wrighty
2 жыл бұрын
Hi Jerry, and thanks mate, hope it helps, Terry.
@matt281075
8 жыл бұрын
Really good video nicely done! nice pond! I done the same idea with my pond just not as neat! well done.
@Wrighty
8 жыл бұрын
Thanks Matthew.
@imadumas2
8 жыл бұрын
Great job and nice explanation!
@Wrighty
8 жыл бұрын
Ed Forbes Thanks. Terry.
@susannejones7698
5 жыл бұрын
Interesting video .Thanks for sharing your hobby. Have you considered installing a screened overflow just below the level of your float valve enclosure ? This would divert excess rainwater into the household drainage system whenever there is a downpour ...
@Wrighty
5 жыл бұрын
Hi Susanne, this is quite an old video and I now have a new pond as we moved a couple of year ago. You can see the final part of the new pond build in this video: kzitem.info/news/bejne/mXymwKSOmHphmWk Terry.
@robertjohn5736
6 жыл бұрын
So Wrighty, you have a wonderful scenic venue between the Parasol topped Plaza and the pond area. It is so beautiful. This video was very well protrayed, narrated and photographed.You have given me some interesting ideas.One point I wondered about is that you placed the filter on solid ground, so it didn't move around or go up and down with the water level.My (smaller pond that yours with goldfish) water level goes up an down a few inches depending on the weather temperature.Would it be better to have the filter floating, so it is always at the affective height?Many thanks again. I will now visit your website. Multi regards.
@Wrighty
6 жыл бұрын
Hi Robert, Thank you for your kind comments. The auto top up fitted to the skimmer keeps the water level of the pond the same all the time so there's no need. Have you seen my new pond? kzitem.info/news/bejne/mXymwKSOmHphmWk There is 5 build videos, but this is the last one. Thanks, Terry.
@dtvking
8 жыл бұрын
Great job, Many thanks
@Wrighty
8 жыл бұрын
Hi Mark, Thank you. There's loads more on my website diypondfilters.com Terry.
@cornishplanthunters4768
7 жыл бұрын
Hi Terry is making a skimmer worth it as i see the basic skimmers are about 20 pounds ?...or have i got this wrong ...the plastic sheet i cant find cheap ...cheers cheers rob
@Wrighty
7 жыл бұрын
There usually around the £40 mark. you might have found a good deal.
@jeromegarcia5396
4 жыл бұрын
From America, unfortunately, I apologise for our country first, lol You got sum good skills there and a nice set up... I'm in the process of building my second earth home out of tires and sand bags, I'm incorporating a massive pond system for the whole property that connects indoor and outdoor ponds, it hasn't been done, or at least no one has shared, I'll have year round indoor grow beds and year round work composting so it's my idea to make my pond system year round using thermal mass to combat winter's... You've giving me sum good knowledge on DIY projects, glad people out there like us...
@Wrighty
4 жыл бұрын
Hi Jerome, thank you, and good to here you enjoy the videos. The pond sound great. Good luck with the build. Take care and stay safe mate, Terry.
@gridtac2911
14 күн бұрын
Don't apologize for me or my country. America is the greatest country in the world.
@jeromegarcia5396
14 күн бұрын
@@gridtac2911 why?
@delawareteacher1182
8 жыл бұрын
Wonderful video! Thank you for explaining your work and the great tips on future repairs and fixes you have already conceived. My Koi will be happy when I install my new skimmer. :)
@nikanaughty
6 жыл бұрын
Fantastic job!
@Wrighty
6 жыл бұрын
Thank you. Very much appreciated. Terry.
@favazfarook
6 жыл бұрын
Thanks Wrighty nice set up , i just wanted to the water out let part and the work of the pump, what is the water level of the pond lesser than the skimmer inlet and pump keeps on pumping all the water out of the tub? is that good for the pump, and also the speed of the water inlet and pump out let has to be the same, i.e. if the pump keep on removing faster that the water in speed what will happen, can you explain around this matter please.
@Wrighty
6 жыл бұрын
Hi Favaz, The weir on the skimmer wants to be about 1 inch below the pond water level. If your pump starts to empty the skimmer you can raise the water level of the pond slightly or make the hole for the weir larger. Terry.
@jacobhoffman8610
7 жыл бұрын
you should box the float in entirely with plexiglas and use foam rubber om the edge of the entire plexiglass construct, well done
@Wrighty
7 жыл бұрын
Hi Jacob, Thank you. I do box it higher and show it in another video. Thanks for the ideas. Terry.
@RicksAquariumsuk
8 жыл бұрын
love your videos from Manchester
@Wrighty
8 жыл бұрын
Thanks Richard, Have you had a look at my website? All my videos are there plus a lot more. diypondfilters.com Thanks again Terry.
@RicksAquariumsuk
8 жыл бұрын
No mate but I will, I was looking at your filter system but I've got a raised pond any ideas??
@Wrighty
8 жыл бұрын
Yes m8. You can build this filter system as a gravity fed system. all the tubs are on one level. Quite a few have built it this way. Terry.
@Wrighty
8 жыл бұрын
You can get the step by step plans on how to build this system website, plus I there to help if needed all the way through the build. There are around 700 of my filters that have been built all over the world now. You can see comments from people that have on my website. I've got to go out now but if you have any questions you can give me a shout on pondfilters@gmail.com Terry.
@harrychung433
9 жыл бұрын
Thanks for another fine video, Terry. Was beginning to wonder if the wier cut into the inner band or not. Saw that is did not till later on there. So did you have to change the strainer size or happy with the first choice? Any particalur reason for clear plexi for the shelf? But most of all, where did you fine that round hole? All mine look like a someone ran them and stomped on them.
@Wrighty
9 жыл бұрын
Harry Chung Hi Harry, and thank you. The weir is just a fraction above the clear perspex and there is no particular reason for the clear perspex, anything similar will do the job. I must admit it was easier to cut the shape of the tub out as I just laid it on top of the tub and I could see the tub to draw the shape and get a good fit. The smaller basket is working really well so not changing it at the moment. It's now been running 3 days 24/7 and no problems yet m8. Terry.
@mazedigitalprintingservice8294
5 жыл бұрын
Nice. I am planning to build a Natural Swimming Pool in the future. This video of yours would help me a lot. :D Thank you for sharing your knowledge. God bless!
@Wrighty
5 жыл бұрын
Glad to help. You very welcome, Terry.
@Ochibason
5 жыл бұрын
Hats Off! Beautiful. Where is Penelopy Keith? Beautiful yard.
@Wrighty
5 жыл бұрын
Thank you, very much appreciated. Terry.
@kaputon1
7 жыл бұрын
Goog job thanks for doing al the thinking for me
@Wrighty
7 жыл бұрын
Thank you and your very welcome. Terry.
@liamwilliams7782
4 жыл бұрын
This video is great good ideas but the scum is just getting sucked threw the basket into to pump & back into the pond? And another question the debris just seem to be spinning around so soon as water levels get slightly higher there just going to be swilling round till they finally end up back in the pond? Not a in bad comment by far I'm just wondering what's what can u help me out as this looked brilliant in till I seen it doing this
@cornishplanthunters4768
7 жыл бұрын
Hi robagain just llooking at getting somemedia ...could i buy used on e bay and clean it in washing machine ?...or should i get new ?
@Wrighty
7 жыл бұрын
If you buy secondhand wash it in Milton (baby bottle steriliser) or potassium permanganate to sterilise.
@sohailbhutta1439
3 жыл бұрын
Good work mate.
@Wrighty
3 жыл бұрын
Hi Sohail, Thank you. I have just released my new video of a new skimmer build: kzitem.info/news/bejne/xH2r0o5pbqWbjaw thanks again mate, Terry.
@sharkfatrccustoms2211
5 жыл бұрын
Top stuff! Could you connect a skimmer directly to the filter? Or to the same pipe as the bottom drain?
@Wrighty
5 жыл бұрын
Thank you. You can connect a skimmer to the filter with the bottom drain if you wish. I didn't at the time I built my pond but I now wish I had. Thanks, Terry.
@hectorcardenas6616
8 жыл бұрын
Mr. Wrighty very nice design may question is. The water doesn't run away from the pond where you installed meaning losing water to the ground.
@Wrighty
8 жыл бұрын
Hi Hector, I'm not sure I fully understand the question. The only water I lose is through evaporation and it's toped up by the skimmer. Terry
@susankelly3136
2 жыл бұрын
You are so clever 👌👌
@Wrighty
2 жыл бұрын
Hi Susan, thank you, very much appreciated, Terry.
@WulfricTheBlack
4 жыл бұрын
Thanks for this video. Love the simple but smart design. I just need to figure how to incorporate it into a hard plastic formed pond liner. And only 155 gallon pond for six 20 yo goldfish.
@Wrighty
4 жыл бұрын
Hi Ryall, and thank you. Your best bet might be, using the same principle but maybe a square container. That might be easier to fit to your pond. Terry.
@WulfricTheBlack
4 жыл бұрын
Wrighty Thanks! I’ll look into that.
@Interp66
6 жыл бұрын
Really well done 👍
@Wrighty
6 жыл бұрын
Hi, Thank you. very much appreciated. Terry.
@vlive2074
2 жыл бұрын
excellent diy skimmer. Can you explain why we have that ballcock for ? and any tips on how to avoid fish getting into the skimmer?
@Wrighty
2 жыл бұрын
Hi mate, The ballcock is an auto pond top up. I have to say, my koi never bothered trying to get in it, but if they do, there's nothing in there to hurt them. Just to let you know, I did fit a bigger basket, as this one did fill quite quickly. Terry.
@MrBerett315
4 жыл бұрын
I plan on a very similar set up. I've seen "mini barrels" and can't remember where. Like 30 gallon would be great
@Wrighty
4 жыл бұрын
You can see the latest skimmer I made on my new pond build here: kzitem.info/news/bejne/16GdmXaXhXhqfHY Terry.
@4kAGRAR
4 жыл бұрын
good video, great DIY garden Pond Skimmer! But use flight mode on your smarthphone when you filming, then it will not make issues with the audio.😉👍
@Wrighty
4 жыл бұрын
Hi and thank you, very much appreciated. and thanks for the tip. Terry.
@briangatlin3395
8 жыл бұрын
Love your videos by the way and I was wondering what the clear piece is that separates and holds the basket in place ?
@Wrighty
8 жыл бұрын
Hi Brian,Thank you. I used clear Perspex. I got it from my local DIY store. You can use anything for this job only the clear Perspex was a lot easier to see through to mark out the shape of the tub.Thanks again, Terry
@briangatlin3395
8 жыл бұрын
So I could use plexiglass ?
@Wrighty
8 жыл бұрын
As long as you can cut and shape it yes m8.Terry.
@briangatlin3395
8 жыл бұрын
Thanks
@juliefreeman9148
3 жыл бұрын
Hi - where did you purchase the Perspex circle from and how did you cut the circle out the middle? Building my own pond and so grateful for your video- thanks Julie
@Wrighty
3 жыл бұрын
Hi Julie, I got the perspex from my local diy store, and I cut the middle out with a jigsaw. Terry.
@rebelquadronfpv1065
5 жыл бұрын
Nice work! How have you found the longevity?
@Wrighty
5 жыл бұрын
I ran this on my pond for 2 years. I have moved house since and built another using a smaller tub but the same design. You can see it in my New Pond Build Video 4. kzitem.info/news/bejne/16GdmXaXhXhqfHY
@DSlayerRaiden
4 ай бұрын
Thank you so much for the in-depth guide on making this pond skimmer. Is it possible for me to ask for the prices on each material used as i could not access the link provided. I have been trying to find a way to mitigate duckweed problems in my pond as it kept on booming each time i netted them all 😅.
@Wrighty
4 ай бұрын
Hi, I'm sorry, but this video was from 8 years ago, so I have no idea what the prices will be now, sorry, Terry.
@mightymatze2335
5 жыл бұрын
Greatfull DIY Idea.. Clear Water! I Like :D
@Wrighty
5 жыл бұрын
Thank you, Terry.
@RaiUriarte
8 жыл бұрын
Many thanks for the video, here in Chile is kind of difficult to find a skimmer, so this is a great solution. One question, how do you call to the blue thing that level the waters?, first time I see it. ;)
@Wrighty
8 жыл бұрын
Hi, It's a ball valve. It's used in toilet system's for the top up after the flush. Terry.
@RaiUriarte
8 жыл бұрын
Many thanks.
@Uncristodepoder
6 жыл бұрын
what kind of glue did you use to glue the Plexiglas to the blue can
@Wrighty
6 жыл бұрын
I didn't glue it at all. it just sits on top of the ring I put in. Terry.
@Uncristodepoder
6 жыл бұрын
thanks
@westcliffkoipond6786
Жыл бұрын
Hi I've just subscribed to your channel Steve sent me over👍👍👍
@Wrighty
Жыл бұрын
Hi Westcliff Koi Pond, and welcome to my channel. This is quite an old video, but I have loads of videos for you to browse through. My channel's all about DIY pond filter builds for koi ponds. I hope you enjoy being with us. Thank you for subscribing, take care and stay warm, Terry.
@rodneystapleton7136
4 жыл бұрын
Hey I couldn’t find the details for this build on your sight and I was also wondering what type of float cal or you were using and where I could get one
@Wrighty
4 жыл бұрын
Hi Rodney, You'll find the skimmer on my website in the shop tab towards the bottom of the list. diypondfilters.com/shop/ You need a side entry for the top up, something like this one, but there are others. www.ebay.co.uk/itm/Toilet-Cistern-1-2-Side-Entry-Fill-Ball-Valve-Brass-Thread-FLUSH-DADDY/261514012691?epid= Terry.
@JoeRKsChannel
5 жыл бұрын
Interesting in your auto top up system - is this connected to a normal hose pipe? Any issues with chlorine in the water you're using to top it up with?
@Wrighty
5 жыл бұрын
Hi Joe, Yes it is topped up using a hose pipe from the tap. But as it will only be a trickle it won't matter. The tap water is mixed with the pond water in the skimmer, which is turning over all the time and returning to the pond. This isn't topping up 24/7, only when the water level drops. Terry.
@Aqua350z
6 жыл бұрын
how did you come about with making sure the pond liner lines up with the skimmers opening and not leaking water into the ground?
@Wrighty
6 жыл бұрын
Hi, Sealant is put around the hole for the weir. The pond liner is then placed up the front of the skimmer weir onto the sealer. It's then fixed with the fixing bracket shown in the video. If you want to see one fitted, take a look at ThePondDigger's video on how to fit a skimmer. Terry.
@TheNWCowboy1
4 жыл бұрын
This is brilliant!
@Wrighty
4 жыл бұрын
Thank you, very much appreciated. Terry.
@tonniemelton5145
7 жыл бұрын
try drilling a over flow in the skimmer just so if it fill to much to fast it will drain
@redsky106
5 жыл бұрын
Nice work,I only wish I could do something similar,however I have no diy skills so this is way to complicated for me ,.
@Wrighty
5 жыл бұрын
Thank you. You'd be surprised. It's quite easy to do. Terry.
@johnchampion7819
4 жыл бұрын
A very well put together video with no rubbish intros like the dreaded " how's it going man" and "hey, what's up man". I'll have a go at this project. One question, do you not have trouble with herons since your pond is very open?
@Wrighty
4 жыл бұрын
Hi John, and thank you for your kind comments. I don't have this pond any more as we've moved house. Here's a link to my new pond build: kzitem.info/news/bejne/mYqOsYmZkJSfaGU this is the first and the rest are on my channel. thanks again, Terry.
@michaelvu9694
5 жыл бұрын
I see you have three blue filter containers on the side of the pond. Could you please explain and show how to build up those three filters? Thanks a lot.
@Wrighty
5 жыл бұрын
Hi Michael, I now do 3 different sizes for different size ponds, You can see them on my website diypondfilters.com thanks, Terry.
@crazygeordie1383
8 жыл бұрын
if you don't want to cut the barrel by hand use a circular saw and put the blade in backwards i know it sounds stupid but try it it cuts great
@crazygeordie1383
8 жыл бұрын
you welcome a buddy told me about it and i laughed at him until i tried it
@andilock8276
6 жыл бұрын
Impressive!
@Wrighty
6 жыл бұрын
Thanks Andi, much appreciated. Terry.
@madayelloh1170
5 жыл бұрын
I’m doing this for sure
@Wrighty
5 жыл бұрын
If you need them you'll find the plans for all my DIY filters on my website https:diypondfilters.com/shop/ Terry.
@LedplayDigital
8 жыл бұрын
perfeito! muito obrigado
@Wrighty
8 жыл бұрын
Você é muito bem-vindo. Terry.
@LedplayDigital
8 жыл бұрын
+Wrighty send me your email, was in need exactly that I will send you a picture, what you did helped me I'm two years waiting for such a solution - my email: ledplaydigital@gmail.com Basilio
@Wrighty
8 жыл бұрын
Hi, My email is pondfilters@gmail.com Look forward to the pic. Terry.
@runerafell4480
5 жыл бұрын
Would it work to just set it inside the pond without any glue to the skimmer plate ?
@Wrighty
5 жыл бұрын
It would work, but you would need to hold it down as I think it would want to float. Terry.
@laughcompilations5010
5 жыл бұрын
I’m making the ec act same following ur vid ,,, question ? How did manage the cutting of the wier?
@Wrighty
5 жыл бұрын
I marked it out and drilled a hole in one corner and cut it out with my jigsaw. Terry.
@laughcompilations5010
5 жыл бұрын
Wrighty thanks for the fast reply appreciated
@bharathmahendran6748
8 жыл бұрын
Nice job
@Wrighty
8 жыл бұрын
+Bharath Mahendran Thank you.
@Franconian_on_a_journey
4 жыл бұрын
hello, where can i find the buidling introduction of the skimmer ? on the website i can't found it.
@Wrighty
4 жыл бұрын
Hi Kevin, You can find the building plans on my website diypondfilters.com under the Shop tab. Terry.
@ChameleonSoul
4 жыл бұрын
How deep should I install my skimmer? Do you measure from the bottom of the weir or top?
@Wrighty
4 жыл бұрын
Hi, The bottom of the weir want's to be around 1" (25mm) to 1 1/2" (40mm) below pond water level. Terry
@ChameleonSoul
4 жыл бұрын
Wrighty what about the float valve? How deep to I place it?
@Wrighty
4 жыл бұрын
You want it so it cuts in if the water in the skimmer drops below the 1 inch above the weir. they have adjusters so you can set it. Terry.
@bennyhoang7992
6 жыл бұрын
Hi where did you buy your round plant basket? I couldn’t find one that big, thanks
@Wrighty
6 жыл бұрын
Hi Benny, I did change the small round basket for the bigger middle size square one. There Lilly baskets mate. You can get them from your local pond shop or garden center. Terry.
@bennyhoang7992
6 жыл бұрын
Wrighty Thanks very much, you have a wonderful day
Пікірлер: 284