I love that mini gas tank your build is quality .... ✌🏽🇺🇸👍🏽
@USMC-Sniper-0137
4 жыл бұрын
Good for 50 feet of travel LOL..
@marcosgalvez8995
3 жыл бұрын
@@USMC-Sniper-0137 nnn
@PhunkyChikin
5 жыл бұрын
Very nice tig work and build. I am worried about the steerer tube fatiguing at the threads while riding it due to bending loads. May want to consider changing to 1-1/8” and use MTB threadless stem, and/or support with upper bearings/longer head tube.
@sittinlow6787
5 жыл бұрын
Just found your channel and I love it. Keep up the good work and might wanna swap to a bit bigger sprocket on the rear, it’ll perform much better
@vancemacd6315
5 жыл бұрын
Clean build, nice work
@rickramirez6854
5 жыл бұрын
Geez I wish I was as talented as this guy he made everything look so easy he is obviously a professional keep up the good work and videos
@cutweldbuild7528
5 жыл бұрын
Thank you
@VasilyBuilds
5 жыл бұрын
Nice fabrication skills 💪 Gotta learn from you!
@mechanicalking
5 жыл бұрын
You're going to get some subs👍
@xani123123
5 жыл бұрын
@@mechanicalking Congratulations to the scooter friend here in Brazil I have one made by my hands. We use a honda 7.0 hp (212cc) engine. It has incredible torque. Please email me haroldosm20@gmail.com and I will send you photos of my project. I use it to go to work and to the course, but my scooter has a structure different from yours that we call here as an original walking machine. It comes equipped with a 2 stroke 37cc engine, very weak, it can not handle climbs, I replace it with a stationary motor, question in your project already thought of putting a torque converter ...
@mechanicalking
5 жыл бұрын
@@xani123123 Yes, thank you. Mine has worked for a few rides but I need a good pull start. I will make a new video someday
@xani123123
5 жыл бұрын
@@mechanicalking I wait for the video friend, a question I did not see the brake of your scooter
@steven-vn9ui
4 жыл бұрын
Wow, your fab skills are amazing. Those welds are just perfect!
@cutweldbuild7528
4 жыл бұрын
thank you
@loadthebowl
8 ай бұрын
bro aint playin around
@MrValhallaKing
5 жыл бұрын
Finally finished this build. Mine does not look as clean as yours but it is finished and it runs and that's all I can ask lol. Thanks for the inspiration.
@marthafuentes1450
5 жыл бұрын
Jamescamera9 made one too. You guys should start a club 8)
@trinkladd
5 жыл бұрын
Beautiful welds man. Nice job as well
@cutweldbuild7528
5 жыл бұрын
Thank you
@jallen1931
5 жыл бұрын
Great Video Style Well Cut..No BS
@meshaneh8138
5 жыл бұрын
Great build! Love your style of video.
@namelessvermillion8188
5 жыл бұрын
For some reason watching you weld is amazing.
@cutweldbuild7528
5 жыл бұрын
Thank you new video coming soon
@geraldhawkins2643
5 жыл бұрын
Man that’s awesome you did an amazing job !!!!!
@cutweldbuild7528
5 жыл бұрын
Thank you
@kellyrenzi9560
4 жыл бұрын
Love it 100% Fabrication stands for I build shit that you can't! Figure it out people
@BigRig003
5 жыл бұрын
A seat and a maybe some lower gearing would do wonders. None the less, very, very clean build
@randyneil6161
5 жыл бұрын
Everything in one nice video.
@Bikey4LifeeNB
5 жыл бұрын
Respect!👍🏼
@GoKartsorGoneFishin
5 жыл бұрын
Awesome job!
@celsomelloke8575
4 жыл бұрын
my friend really liked your project how to assemble an equal you can give me the measurements of the frame.
@wahyudikarya3031
5 жыл бұрын
Great job Man...
@nounouberbez
5 жыл бұрын
Bravo! C'est super jolie en plus 👍
@meganshiplett8272
5 жыл бұрын
Amazing fab shop reminds me of ze Germans over engineering at its finest lol your talent you should be making tight tolerance airframe components
@gingerbread1032
4 жыл бұрын
Got a pink girly razor ride on I'm gonna sneek a chain saw motor into and refinish in starlight blue and silver.
@JOSHUAloves1
5 жыл бұрын
Super great work!
@-DIYPRO-
5 жыл бұрын
And powder coating! This thing is pretty sweet!
@user-pi8vt7ut3n
2 жыл бұрын
... отличная получилась техника для езды на работу!-, заказы случайно не принимаете?-, а то купил бы себе такой-же!!!
@MrGarda42
4 жыл бұрын
Would love to see Shock Absorbers modded to this
@OnceUponASundayxxx
5 жыл бұрын
i could only dream for a fab shop like that...
@cutweldbuild7528
5 жыл бұрын
Im very fortunate to work here
@rigobertogutierrez4130
5 жыл бұрын
Badass bro 💯👌
@amscout1156
5 жыл бұрын
Very nicely done. Once I get my powertig welder I might give something like this a try.
@pierrotcrenadez8242
5 жыл бұрын
Merci
@bighomieJ5X
5 жыл бұрын
Nice build , u got mad skills . Now here comes the magical question , how much for the frame and wheels no motor ??🤗🤗
@Gamleprofil
4 жыл бұрын
Steel is about $2 per kg in norway. I guess this weight about 30KG, so $60
@gregsteele9002
5 жыл бұрын
You can turn the governor screw way out and get up till like 4800 RPM instead of 3600 without removing the governor
@moosedrummer1
5 жыл бұрын
Greg Steele or take it out
@MrValhallaKing
5 жыл бұрын
I would take it out. Shattered plastic in the motor is too big a risk.
@juanbracamontes
5 жыл бұрын
www.ebay.com/usr/bracosma-40
@MGszamanVlog
3 жыл бұрын
hi can I use part of your video to my compilation homemade inventions ?
@bouncingbetty3045
4 жыл бұрын
You have great talent. Keep the vids coming
@cutweldbuild7528
4 жыл бұрын
Thank you
@jacklacsonbautista
4 жыл бұрын
Shock absorber with rubber engine mounts to lessen vibration at high speeds
@duvielhernandez2887
5 жыл бұрын
Rear sprocket too small i can hear the clutch burning but anyway nice built
@Sor00
5 жыл бұрын
Very cool Device!
@serhhupper2236
5 жыл бұрын
Skills how long did u plan it colect parts and stuff
@aarondavis5535
5 жыл бұрын
Wow nice work I want one
@FairvioyenPJ509
4 жыл бұрын
Nice videos. I like it
@UltimateMaking
5 жыл бұрын
very nice build, where did you get the kart wheels and axles ? I find it really hard to find axles
@cutweldbuild7528
5 жыл бұрын
Amazon just cut the axle down
@redneckqc4317
5 жыл бұрын
Moi je les achète sur go power sport, mais au Canada la livraison doit être moins chère quand France. Essaye le code CC10 ça te fais un rabais de 10%.
@paisitalondono01
5 жыл бұрын
Genial.! Muchas Gracias. Salud y Éxitos.!
@MrVeggis1964
5 жыл бұрын
Cool man 👍 But a bit short?
@upulbandara6486
5 жыл бұрын
Good job
@nismoman420
3 жыл бұрын
Sexy beyond belief. Such a great fabricator. Would have loved more footage of you riding, especially a top speed and acceleration test. You should be selling these things!
@landtowater_2747
5 жыл бұрын
he must make millions to have a shop like that
@christianlopez8662
4 жыл бұрын
un genio oye como le pongo una marcha electrica a una como la que hiciste.
@erikeduardoch.p.2990
5 жыл бұрын
What kind of equipment do you have for welding? Give me information. Friend
@jayg1989
2 жыл бұрын
Nice work💪💪, how much u selling it for bro, im interested in one
@gavinmcvey8177
4 жыл бұрын
Looks amazing sounds good looks good for top end speed 😎😎🇺🇸🇬🇧
@Cocommunities
5 жыл бұрын
Why have I only just found this channel
@gargar209
4 жыл бұрын
i cant figure out what keeps the handle bars from spinning free from the forks. seems like a weak point where that long tube is welded to the headset cap. ive have goped bars break right there
@sikema6656
5 жыл бұрын
Nice work
@cutweldbuild7528
5 жыл бұрын
Thank yy
@robinmathieu2107
5 жыл бұрын
Nice ! What a fab shop !
@Ecosteven
4 жыл бұрын
The concept of DIY has gone out the window in this vid. Lol
@DJSOULIS
5 жыл бұрын
*Great Job.. You forget the Brakes & the Stand*
@youngbuck4044
5 жыл бұрын
Please do a ride video!
@atilasmedeiros
5 жыл бұрын
woow! Perfect! man, could you send the measurements of the chassis? Do you have any projects?
@d-d-d-djdosedrapmixx5102
4 жыл бұрын
What kind of welder is that you are using????in the very beginning??
@rogtel1932
4 жыл бұрын
Fala aí garoto. Que solda é essa que vc usou?
@johnbravo7542
4 жыл бұрын
Very cool
@user-pb7fb7cb3l
4 жыл бұрын
Здравствуйте. Какие это колеса от карта? Задние или передние?! Сколько дюймов колесо?
@tonymontalban5603
4 жыл бұрын
#####.... This Guy is a Stone Cold Professional. OUTSTANDING
@ejb2184
5 жыл бұрын
Nice but I think I might have missed the part that you installed breaks
@casemods
4 жыл бұрын
Brakes*
@jumpman_MJ23
5 жыл бұрын
great work.. :)
@xlasvegan7x
5 жыл бұрын
That’s an Acorn table gotta a super old school👍
@elfatigas17
5 жыл бұрын
Está bonita pero le falta una cosa le falta guardabarro atrás alante para las la salpicaduras del agua y el barro que salpican las ruedas
@damdifido1
4 жыл бұрын
Nice welds
@batscher61
4 жыл бұрын
He He Wo hast du die Flihkraftkupplung her für den GX 120
@glennsprague8535
3 жыл бұрын
Sweet!
@JeffMusicFL
3 жыл бұрын
This is the best build I've seen! Awesome fabrication! For the front fork did you find one already made or cut one yourself out of rectangle tube? If so, what thickness would you suggest. Thanks!
@Anthony-uz5tj
2 жыл бұрын
looks like 3/4 of an inch steel bent in two places go back to very start of video about 40 seconds in
@JackJohnson-xd2ln
Жыл бұрын
Front fork looks like it came from one of the legs on a zero-turn mower.. js
@cutweldbuild7528
Жыл бұрын
Hahah nope i made it
@pittdevil89
2 жыл бұрын
Nice tool
@user-mm8nj4ie3m
4 ай бұрын
❤Thank you❤❤❤❤❤
@erikarianto7819
5 жыл бұрын
Good job,broh
@samleen
3 жыл бұрын
Do you think I could set up a predator 212 on my razor e300?
@johnbeer4963
5 жыл бұрын
don't get me wrong this is so cool it's frozen solid but it can't really count as DIY. I'd say more "professional with small scale manufacturing facility makes project look fantastically easier than it is"
@o0julek0o
5 жыл бұрын
I wouldn't quite say so. If you have just a few tools, you can definitely do this at home. Not only that, but there has popped up a myriad of services offering things like CNCing parts using your own design files, which would help plenty here. Otherwise you don't need much more than an angle grinder, a welder and some basic tools along with a can of decent spray paint. This is definitely DIY, just not on the same level as origami or knitting.
@johnbeer4963
5 жыл бұрын
@@o0julek0o TIG welder, something to cut that thick af metal like a band saw, either some CNC device or the ability to farm out your CNC stuff.. sure, you can make a diy with far less tools, or even convert a preexisting scooter without even a welder... but it's not going to look like this, or be in any way time effective to make this way without the machine shop he has.... not to mention the evident high skill level. You could have some company make all the stuff sure... but then it costs a fortune to make, like, good used car money
@WeldersOnly
5 жыл бұрын
The guy did it himself and didnt buy it prebuilt, I'd say that's the definition of DIY.
@dpkcreativity
5 жыл бұрын
Fit Should be battery and motor assembly. बैटरी और इलेक्ट्रिक मोटर फिट करके बनाना ज्यादा अच्छा रहता
@robspear03
5 жыл бұрын
@@WeldersOnly By that logic... My vehicles were made by a team of DIYers. 😅
@SoundRelaxus
Жыл бұрын
Brother you are so talented. That thing look crazy fun !!!
Пікірлер: 474