Hi Julius, I'm looking to build something very similar to this but have trouble understanding all of the connections. For the Fitting Flow, what am I able to eliminate to have my garden hose connect to the pressure washer directly with a quick connect... since I don't need the extra piping. One more thing, am I able to connect the jumper cable directly to the m22 adapter without the elbow? Thanks.
@jbpasion071
2 жыл бұрын
Hello Nikhil! I'm glad I spark your inspiration for your pressure washer build! Yes I know I had a lot of trial and errors when I pieced together the connects so I am glad to help! Since the Karcher 1700 cube water inlet is a 3/4” GHT male you would need "Stainless Steel Garden Hose 3/4” Female QD Coupler" www.obsessedgarage.com/products/stainless-steel-mtm-garden-hose-3-4-female-quick-disconnect-coupler?_pos=9&_sid=d55214b8d&_ss=r On your garden hose end you would need this "Quick Disconnect Male Plug X Female Garden Hose" www.brewershardware.com/quick-disconnect-male-plug-x-female-garden-hose.html and that should connect to the Female QD Couple. Also, yes you are able to connect the jumper cable to the M22 adapter since on the female end of the M22 is 3/8" npt. Good luck on your build and I can't wait to see it! Don't hesitate to ask me more questions. I'll see you on the next video! Take care!
@nikhil7229
2 жыл бұрын
@@jbpasion071 Thank you for the super fast reply! I'm a lot more confident in what I'm buying now! Thanks.
@jbpasion071
2 жыл бұрын
@@nikhil7229 Yeah no problem, I try to keep up with questions on my channel haha. Awesome! I'm glad that I helped you on this!
@jbpasion071
2 жыл бұрын
@Nikhil Hope you are reading this before you purchase your fittings. I made a mistake on my fittings. You need to use the supplied BSPT to female garden hose adapter from your Karcher kit. Then you would need to purchase "Stainless Steel Garden Hose 3/4” Male QD Plug" www.obsessedgarage.com/products/stainless-steel-mtm-garden-hose-3-4-male-plug?_pos=11&_sid=e383aaf05&_ss=r attach it to the BSPT to female garden hose adaptor. Then on your garden hose you attach the "Stainless Steel Garden Hose 3/4” Female QD Coupler" You wont be needing the "Quick Disconnect Male Plug X Female Garden Hose" Hope that clears it up
@nikhil7229
2 жыл бұрын
@@jbpasion071 that’s great, and what connector can I use to connect the hose to my pressure washing gun?
@confluencechris
2 жыл бұрын
Awesome build man! You just motivated me to build something similar to keep my vehicles clean! Thank you!
@u1StupidKiD
2 жыл бұрын
Dope bro. Convenient
@jbpasion071
2 жыл бұрын
Thanks bro! Yes very convenient. See you on the next one!
@apexbryle
2 жыл бұрын
Legit setup my guy 🤌🏽🤌🏽🤌🏽
@jbpasion071
2 жыл бұрын
Yo Bryle! Hope all is good. Thank you for liking the setup!
@rubenharris9241
2 жыл бұрын
Well done sir. Gave me some good ideas/tips.
@jbpasion071
2 жыл бұрын
Hello Ruben! Hope things are well with you. I am glad that I inspired you to build your own pressure washer setup! Please let me know if you have anymore questions. See you on the next one!
@RMDareGreatly
2 жыл бұрын
It sure has been a minute Julius, keep them coming. Hope everything is ok!
@jbpasion071
2 жыл бұрын
Hey wadup Rocky! Yeah its been a minute and we coming in hot! haha Yes everything is okay, we'll have it for another video!
@TheT1r1
2 жыл бұрын
Awesome video
@jbpasion071
2 жыл бұрын
Hey SoCal I appreciate that! I'll see you on the next one!
@punyaslokmohapatra7631
2 жыл бұрын
Nice
@jbpasion071
2 жыл бұрын
Thank you!
@peterjohnson8631
2 жыл бұрын
What was the reason for going with the k1700? Also what did you end up doing with the hose that was for the soap dispenser because I know by not sealing it causes the surging of motor.
@jbpasion071
2 жыл бұрын
Hello Peter! The reason why I went with the K1700 was the ability to have it on the shelf that is mounted on the wall for ease of use and space saving in the garage. Hmm I haven't noticed any surging of the motor but will keep an eye on it and will let you know. See you on the next one!
@jbpasion071
2 жыл бұрын
Hello Peter hope things are good! Had a chance to use the pressure washer this weekend, I was afraid it was gonna be a cold day to wash the car but it was okay haha. Yes the K1700 does surge not sure if its because I dont have any liquid going into the washer from the soap dispenser. You can also check out Jeremy over at his channel to see similar surging. Here is the link to his video kzitem.info/news/bejne/tY-t2Z-jj2ikeqg
@MrAmonts
2 жыл бұрын
Hi, nice instructional video! Are you running water from outside each time you use the pressure washer? I don’t see where your water is coming from. Thanks
@jbpasion071
2 жыл бұрын
Hello Alex! The water is coming from the hose bib outside the house. Its about 25 feet away from the pressure washer inlet.
@bryanpersonal2
2 жыл бұрын
Hi Julius: I though the K1700 stock was yellow? yours is Black? I like the Black, did you paint it ?
@jbpasion071
2 жыл бұрын
Hello Bryan! Hope all is good! Yes the K1700 stock is yellow. I've taken off the front plastic piece, I've included in my video on how to take it off. Should be a straight forward process but let me know if you have any questions.
@bryanpersonal2
2 жыл бұрын
Hi Julius: Could you measure width of the Coxreel for me? Thanks !
@jbpasion071
2 жыл бұрын
Hello Bryan. Yeah its 9.5” wide. More information and link on the Coxreel in the description below. Let me know if you need anything else!
@moisesperez3693
2 жыл бұрын
100 feet of hose.... over kill kinda?
@jbpasion071
2 жыл бұрын
Hello Moises Perez hope all is well! The 100 feet of hose was the only one that was available. I would’ve gotten away with 50 feet. What size are you planning to run?
@moisesperez3693
2 жыл бұрын
@@jbpasion071 50 ft would be enough for me... what was your total cost ?
@jbpasion071
2 жыл бұрын
@@moisesperez3693 If I can remember total cost was not more than $500
Пікірлер: 43