Phenomenal job with the video and easy-to-understand process. Thank you!
@soundheadquarters
9 ай бұрын
Thank you! Thanks for watching
@ApparelSuccess
Жыл бұрын
So sick! Well done man
@soundheadquarters
Жыл бұрын
Thanks dude 🤟
@talbotfilms8156
Жыл бұрын
How thick is the insulation board?
@benmacdougall
10 ай бұрын
What length of Brad nail did you use in this to secure the slats to the frame?
@soundheadquarters
9 ай бұрын
I believe they were one inch or inch and a half! Thanks for watching!
@isThatAYeti
6 ай бұрын
This is a really cool project I am looking at doing this myself at home. What wood did you end up using for the slats?
@soundheadquarters
6 ай бұрын
This was select pine. Thanks for watching!
@MeezyPeezy
Жыл бұрын
Hey man, your videos have inspired me to take on this DIY project. I'm more than capable and have always wanted to take it on but lacked the confidence, your instruction is incredible and love that i stumbled upon your videos. Subscribed Thank you!
@soundheadquarters
Жыл бұрын
I really appreciate that thank you for watching! Good luck on your build and have fun!
@vitalydzhalilov6832
Жыл бұрын
Does it help with heating insulation? Or only for soundprof? And if it's cold in this cellar could it make it worse adsorbing condensation and getting mould on back side of the panel?
@dburnmusic
4 ай бұрын
Stumbled across your channel over the last week to get some ideas for a studio room build in our new garage. Awesome tips & content!
@soundheadquarters
4 ай бұрын
Glad to hear thanks for watching!
@WackyJackyTracky
Жыл бұрын
Looks nice the slat wall... but how do you know what the acoustic properties are? Some mix of absorbtion and diffusion yes, but what mix? Which frequencies get diffused and how? Bought absorbtion-binary-diffusion-panels have more unsymmetric mathematical "random" patterns for the diffusion and come with frequency-absorbtion and diffusion charts.
@soundheadquarters
Жыл бұрын
We did not do any acoustic measurements for this client. I suggested a random pattern for the slats, however this client had an aesthetic vision which for him was a higher priority than the acoustic properties. Would be interesting to do tests for sure! Thanks for watching
@willb1157
3 ай бұрын
That’s right. There is a simple rule about the diffusion, certainly 50% of the space on the panel should be open and 50% batons. But pref in a certain pattern. But then living in Australia, I would kill for Rockwool (at normal prices). Its impossible. All of it is imported.
@mrgadget8905
Жыл бұрын
Nice video, but I didn't catch what fabric you are using?
@JC_CaballeroPerfumes
7 ай бұрын
Bro, doesn't wood affect absorption? Is the panel without wood more effective?
@soundheadquarters
7 ай бұрын
The wood slats add some diffusion to the absorbers. Check out GIK acoustics, or other manufacturers acoustic slat walls for reference. Thanks for watching
@JC_CaballeroPerfumes
7 ай бұрын
@@soundheadquarters Thank you! You have great videos here, Regards from Mexico!
@daneolsen8880
Жыл бұрын
I'd be interested in buying some of these, maybe in a slightly larger size. I checked your website and it looks like they're not for sale. Could you build to order?
@soundheadquarters
Жыл бұрын
Absolutely! Please fill out contact page on my website and I can get a quote ready for you
@PervurtTV
Жыл бұрын
nice video .. just wondering, since wood reflects the sound, and there is plenty of wood surface on this panel, how could this panel absorb and reduce echo and reverberations ?!?!?!
@soundheadquarters
Жыл бұрын
The effect of the wood slats will reflect the sound waves in different directions rather than in one direction like a smooth flat wooden surface. Reflecting in the different directions reduces flutter echo and reverb times by scattering the waves so they have reduced sound energy to the parallel wall/surface. And the absorption behind the slats will offer absorption from whatever sound misses the slats, and where the slats reflect towards the absorption. There are many different ways to build absorber/scatter panels but they offer both absorption and diffusion in the same product. Thanks for watching!
@PervurtTV
Жыл бұрын
@@soundheadquarters Thanks for this great reply ! cheers and keep going with these great videos
@TheYadubardas
4 ай бұрын
I'm not sure about the rockblock, which is not as good as an acoustic membrane and takes a lot of space compared with a membrane.
@dudeabides3860
Жыл бұрын
Did you staple the dark wood onto the panel? Or did you glue it
@soundheadquarters
11 ай бұрын
It's nailed with 18 gauge brad nails! Thanks for watching!
@mtorres469
9 ай бұрын
didn't use a mask to cut that rock wool?
@soundheadquarters
9 ай бұрын
I used a Bluetooth mask
@godfreytlhapane4066
3 ай бұрын
that honeycomb ibsert in frames.
@Genital.Wartzenegger
Жыл бұрын
would it be detrimental to use this wood design on a bass trap?
@temorob
6 ай бұрын
These look amazing!
@soundheadquarters
6 ай бұрын
Thank you! Thanks for watching
@JacksonCarson
9 ай бұрын
Inspiring stuff! Thanks
@soundheadquarters
9 ай бұрын
Thanks for watching!
@RobertoSunga
Жыл бұрын
Your videos have inspired me to build my studio but at the same time I can't help but think of all those toxic fibers you're handling with no protection. Not to mention they remain in someone's working space. You should do some research and start using cotton batts instead of mineral or glass fibers.
@soundheadquarters
Жыл бұрын
Glad I inspired you to do your own build enjoy! You're correct I should be wearing a respirator while handling the insulation. However once these materials are covered in fabric and settled, they are no longer an airborne risk within a workspace. The issue with cotton batts is they are highly flammable and lack in performance to other options. Flammability does not mix well with electronics especially in commercial settings where everything must be fire rated. There is a reason why the top acoustics manufacturers are glass fibre based wrapped in fabric. Here in Canada our equivalent is rockwool, which is what I use since that's what's available to me. Thanks for watching and have fun with your build!
@RobertoSunga
Жыл бұрын
@soundheadquarters fabric is still porous, which is why sound can pass through it in order to still be effective. Sound makes those fibers vibrate making them airborne again. Not to mention air conditioners too. I get some buildings have to gave fire rated materials but they also sell foam batts now. I would take a little less acoustic efficiency for cleaner air.
Пікірлер: 40