I'll show you how to build a very economical and professional-looking webbed canoe seat that can be removed or installed in less than 3 seconds. My total cost was just under $20 for webbing, threaded rod, and a piece of deck board.
See the more detailed blog post with photos and instructions at:
ruggedoutdoorsguide.com
TIMESTAMPS
0:00 - Start
0:52 - Intro
02:15 - Planning Your Seat layout/size/location
03:55 - Step by Step Tutorial
12:13 - Partially finished seat ready for webbing
14:54 - Application of nylon webbing to frame
20:30 - Finishing of threaded rod supports and gunwale clips
21:57 - The finished product!
22:12 - Installation!
22:43 - Conclusion and encouragement!
Blog: ruggedoutdoors...
SHOP RuggedOutdoorsGuide.com
NYLON WEBBING AVAILABLE AT - amzn.to/2UhoPgF
My CAMERA AND VIDEO PRODUCTION GEAR:
○ My camera - amzn.to/3xyRTi8
○ SD card - amzn.to/39G6aP1
○ Tripod - amzn.to/2SWsT3d
○ Studio lights - amzn.to/3xwp4CM
○ Green Screen - amzn.to/2SVqJkq
○ Microphone - amzn.to/3gIoWL9
And make sure you subscribe to my channel!
DISCLAIMER: Links included in this description might be affiliate links. If you purchase a product or service with the links that I provide I may receive a small commission. There is no additional charge to you! Thank you for supporting RuggedOutdoorsGuide.com so I can continue to provide you with free content each week!
Негізгі бет DIY REMOVABLE CANOE SEAT (detailed steps and under $20)
No video
Пікірлер: 64