follow these steps:
1、Prepare your workspace with all necessary materials and ensure it is well-ventilated.
2、Mix a 3:1 ratio of epoxy resin and hardener thoroughly until it is clear and streak-free.
3、Divide the mixture into three parts and tint each with black, deep green, and purple pigments respectively. Mix each color thoroughly.
4、Let the colored resin sit for about 1 hour to thicken slightly, which will help prevent the colors from blending too much when poured.
5、Prepare your molds and pour the colored resin into them, creating layers or patterns as you desire. Use a toothpick or a stick to manipulate the resin into your preferred design.
6、Sprinkle glitter and place blue and green cellophane pieces along the borders where different colors meet to create a distinct, shimmering boundary.
7、Use UV resin to position and fix the dried flowers in place within the resin. The UV resin acts as a quick-setting adhesive under UV light./
8、Finally, cover the composition with a layer of clear epoxy resin mixed at a 3:1 ratio. This seals in the entire design.
9、Remove any bubbles that might have formed by gently going over with a heat gun or a torch. Be careful not to overheat any single area./
10、Allow the resin to cure completely as per the manufacturer's instructions. This could take anywhere from 24-48 hours.
11、Once cured, you can demold your pieces and attach the hardware to turn them into keychains.
Keychain mold: amzn.to/48fPJ95
White and black pigment: amzn.to/42LwSBK
Color pigment: amzn.to/49bIQXv
Silicon pen: amzn.to/3SXD1r6
Digital Pocket Scaleamzn.to/49tQb5b
Gold sticker :amzn.to/3SAzgGN
Glitter Gel Nail Polish : amzn.to/3umHb2s
Dry flowers: amzn.to/42N4Plc
Негізгі бет DIY Resin Art Keychain Tutorial: How to Create Stunning Floral and Glitter Designs
Пікірлер: 28