Free Cut Files:
www.furtherfab...
PARTS LIST: (affiliate links)
1x Nema 17 Stepper Motor - amzn.to/3uGhzIn
2x 330mm Steel rod, 8mm OD - amzn.to/3cK7u6I
2x 300mm 2020 t-slot aluminum extrusion - amzn.to/3wm001x
4x 608 Skateboard Bearing 22mm OD, 8mm Bore - amzn.to/3ugnLGI
2x 20 tooth gt2 pulley, 8mm Bore - amzn.to/3dHef91
1x 20 tooth gt2 pulley, 5mm Bore - amzn.to/3sFswZU
1x gt2 6mm closed loop timing belt, 180mm long - amzn.to/39Atv6l
4x m3 12mm socket head hex drive screws - amzn.to/3moxmIV
4x m5 16mm socket head hex drive screws - amzn.to/3fAitl6
4x m3 5mm hex drive grub(set) screws - amzn.to/3wiamj7
Link to GeekSmithing Video:
• DIY Rotary Module for ...
Other Rotary Setup Methods:
- Use an additional stepper driver and enable the U-axis on the Ruida 6445g using a firmware update that was released at the end of last year. However at the time of this video I was unable to get the update to function correctly. This may be because I’m a big dummy or because the firmware is still buggy. This would be the most practical method if you are able to get it working. Link to my initial info: www.lightobject...
- The other method is to add in another stepper driver and use a switch to select which axis to drive. Link to my initial info: forum.lightbur...
DIY Laser Cutter
If you'd like to know more about building your own Laser Cutter, I've got a whole series on it that you can check out:
• How CO2 Laser Cutters ...
Instagram:
/ further_fabrication
Негізгі бет DIY Rotary Attachment for my DIY Laser Cutter
Пікірлер: 131