Thanks very much! Damn, I can't believe high calibre electronics channels would visit my videos!
@Asraful_x
3 жыл бұрын
@@chrclmnky yes he does. I have seen him several times in the comments section of many other channels. 😅😅. He is nice. 😊
@thowfiqrt6846
3 жыл бұрын
Bro it is studio monitor speaker???
@SkullRabbit
5 жыл бұрын
Very nice
@chrclmnky
5 жыл бұрын
Thanks for the comment, Skull Rabbit 😉 😊
@swagon4545
4 жыл бұрын
Very nice.. 👍
@chrclmnky
4 жыл бұрын
Thanks mate.
@clearme2
4 жыл бұрын
I had the same harbor freight router ! It lasted me 10 years before it finally took a shit. Used it few times a month for its entire life. Your build came out nice as hell👍🏻
@mspolas9964
4 жыл бұрын
Racoon Tunes on
@maryjane-hc6jt
5 жыл бұрын
Who says you need the best, most expensive tools to make it right!? This guy made some cool ass boxes with homemade tools!
@chrclmnky
5 жыл бұрын
Thanks Joe
@chrclmnky
6 жыл бұрын
Box size is 10" x 8.5" x 13" outside dimensions. 😊☺😉
@rodrigojorquera4308
6 жыл бұрын
Buen trabajo.buen video
@chrclmnky
6 жыл бұрын
Thank you Rodrigo.
@thanhat1462
6 жыл бұрын
length is how many centimeters, and width is how many centimete
@thanhat1462
6 жыл бұрын
What is the size of the bass speakers?
@chrclmnky
6 жыл бұрын
Hello Thanh, woofer is 6.5"
@pabloosvaldopenizzotto1098
6 жыл бұрын
Nice DIY project. You should be proud of your work. Congratulations!! I have only just one question. Why you did not add some damping material inside?
@chrclmnky
6 жыл бұрын
Hi Pablo, thank you for the positive feedback. I didn't put any dampening material because the MDF is dense enough to hold any reverberations.
@pabloosvaldopenizzotto1098
6 жыл бұрын
CHRCLMNKY as far as I understand the purpose of dampening material is to kill as much as possible stationary waves inside the enclosure, that finally will get out through the port as distorted sound. Anyway is a matter of taste. If you are happy with the way it sounds, this is the most important thing.
@chrisvinicombe9947
6 жыл бұрын
I was wondering the same thing. Self adhesive closed cell foam is very good. I find it improves the bass tone and stereo imaging quite a bit , cheap too 😄 Like all your DIY tools and enjoyed the video. The speakers turned out nice 👍
@chrclmnky
6 жыл бұрын
@@chrisvinicombe9947 Thanks. 😊☺😆
@chrclmnky
6 жыл бұрын
@@pabloosvaldopenizzotto1098 Sorry typo, "MDF is dense enough to kill any reverberations." 😂😁
@Holztuben
6 жыл бұрын
No soundtest No Like
@chrclmnky
6 жыл бұрын
Hi Holzstube Woodworker, will upload a test video soon, please subscribe to get new updates. Thanks! 😊
@alfredogomez9762
Жыл бұрын
Yes jaja
@pobrengtribu5682
7 ай бұрын
Sir asa ka naka palit anang magnum? Salamat sir.
@yttean98
5 жыл бұрын
Nowadays owning a near field 2way speakers, it is cheaper to buy than to build them yourself, the current crop of commercial 2 way near field speakers are very good with in-built amps thrown in free. Then you will say it is fun to build yourself.
@chrclmnky
5 жыл бұрын
Hit Like and Subscribe. Thanks.
@EYEONEVENTS
5 жыл бұрын
You deserve more than 3 million views coz ur work is very clean professional and presice
@chrclmnky
5 жыл бұрын
Thank you for such a nice feedback.
@Phantom.3296
6 жыл бұрын
No sound test=blue balls
@chrclmnky
6 жыл бұрын
Hello Nithin, will upload a test video soon. Be sure to subscribe. Thanks!
@LS.11
5 жыл бұрын
I would take it to the professional painter for painting. Well done.
@chrclmnky
5 жыл бұрын
Yes next time I would to.
@arfathkhalid1099
4 жыл бұрын
Thank you so much for showing router bits used to make those circles 👌👌👌
@chrclmnky
4 жыл бұрын
👍
@angorets77
6 жыл бұрын
А показать как играют!? Это же преступление!!!
@AmazingRoony
6 жыл бұрын
Respect ,,. !!! Great !
@chrclmnky
6 жыл бұрын
Thank you Jean Paul. 😊
@djtapan8178
6 жыл бұрын
Bhai box price Kate
@prkashshil456
5 жыл бұрын
Excellent custom design. These hands have magic.
@chrclmnky
5 жыл бұрын
Thanks very much Prakash.
@Nospeakyenglish
5 жыл бұрын
Not bad. You should have sound proofed the inside of the box and added foam under the speaker mounting point. Could have also added a bagel behind the mid drivers. These are just things that can take your setup to the next level
@chrclmnky
5 жыл бұрын
That was a very good feedback. Thanks, Chris.
@uttaramukhi5015
4 жыл бұрын
I love these idea of making the speakers
@chrclmnky
4 жыл бұрын
Thanks for the feedback, Uttara.
@uttaramukhi5015
4 жыл бұрын
Actually i want to make this speaker and tell me all the recommend product for make the speaker
@KLSMOOTH77
6 ай бұрын
Bro your video are awesome And build are extreme powerful
@chrclmnky
6 ай бұрын
thnkx kl smooth
@onkarsharma1639
Жыл бұрын
Art unforgettable 🙏🥰❤️
@gonzavilla4130
5 жыл бұрын
Excelente!!👏👏 Solo falto la prueba de sonido 👌
@chrclmnky
5 жыл бұрын
Thank you Gonza.
@UltimateBNA
2 жыл бұрын
Your work so clean 😍
@chrclmnky
2 жыл бұрын
thanks
@jonathanwong880
3 жыл бұрын
Absolutely Gorgeous!
@chrclmnky
3 жыл бұрын
Thanks 🍾🌚🌙
@sunsys0
2 жыл бұрын
Excellent clean and neat work, great video 👍
@chrclmnky
2 жыл бұрын
Thanks. 🥳😅🧨
@pix_by_joshua
4 жыл бұрын
Great speaker build. Thanks for the great video.
@chrclmnky
4 жыл бұрын
Yes sir.
@gordiefrench5342
5 жыл бұрын
very very nice work with money saving shows anybody can do it thank you
@chrclmnky
5 жыл бұрын
Hello Gordie, thank you for such a nice feedback. Have a nice day.
@Caiofelipe1099
5 жыл бұрын
Muito bom adorei seu vídeo um abraço aqui de Aracajú sergipe Brasil
@mariodiaz3868
5 жыл бұрын
WE need to see it in action your work is very good
@parkerglenn4484
Жыл бұрын
Everyone in the comments is so needy. Good video & nice speakers!
@chrclmnky
Жыл бұрын
😃 thanks
@MariusVideoOfficial
5 жыл бұрын
Very nice work!
@chrclmnky
5 жыл бұрын
Thank you Marius. Appreciate the feedback. :)
@kellytaylor3915
5 жыл бұрын
Nice parts. However there is so much better wire to use for the crossovers. Better internal wires makes a huge sound quality difference.
@chrclmnky
5 жыл бұрын
Hello Kelly, yes I was so mindless with the wires I used. Next time I should invest in more thicker wires.
@orvilleblack3774
Жыл бұрын
Awesome....I'm loving this....if you don't mind sharing your measurements....thanks
@hi-fihaven2257
6 жыл бұрын
Nice work on the video! Great speaker project!
@chrclmnky
6 жыл бұрын
Thank you Hi-Fi Haven. 😄😊
@pcorf
4 жыл бұрын
Philippines yay! I traveled there in November last year. Nicely made speakers.
@chrclmnky
4 жыл бұрын
Thanks Pcorf.
@KyoHeiSuminoe
4 жыл бұрын
Grabe tol pag pinoy talaga gumawa ng speaker box iba klase
@electronicshelpcare
2 жыл бұрын
Great making
@silentkillerofkoyan
3 жыл бұрын
I would buy that fine build box
@mr.elturo1252
3 жыл бұрын
woooow.....ganda ng pagka, gawa malinis na malinis👍👌👌
@chrclmnky
3 жыл бұрын
😎😍🎱🛠
@mr.elturo1252
3 жыл бұрын
sir magkano kaya budget sa ganyang DIY BOOKSHELF SPEAKER??😉
@chrclmnky
3 жыл бұрын
@@mr.elturo1252 a few dollars
@mixytv3258
5 жыл бұрын
Clean 🤩should make a sound test
@mukeshjohri2379
2 жыл бұрын
Very good nice job
@jeffwhite8017
5 жыл бұрын
Some people are just bad ass lol. Those look like JBL made them lol. Nice work man!
@chrclmnky
5 жыл бұрын
Thanks, Jeff. 😎
@hansparam
5 жыл бұрын
Nice video. But you should also add a layer of glass wool in side the spk box to absorb the sound.
@chrclmnky
5 жыл бұрын
Thanks for the comment Paramhans.
@yelmer6940
4 жыл бұрын
Grabe pud ug POWER TOOLS bah! Okay kaayo! Nice Bro!
@chrclmnky
4 жыл бұрын
Thanks sir
@леонидбулавинов-у8о
3 жыл бұрын
...круто! Когда есть все инструменты и всё необходимое проще творить!
@chrclmnky
3 жыл бұрын
yes i agree. thanks
@marionojavamuth5376
5 жыл бұрын
Nice....but ending Very Nice for Tes This speaker 😁👍👍
@timschutte6924
3 жыл бұрын
You do nice work. I've seen your other videos and particularly like the JBL subwoofer build
@chrclmnky
3 жыл бұрын
Thanks Tim.
@MulArn01
3 жыл бұрын
All i was waiting to hear how do they sound.
@chrclmnky
3 жыл бұрын
They sound nice.
@akshatgupta2897
6 жыл бұрын
Awesome and thanks for your help
@chrclmnky
6 жыл бұрын
You are awesome Akshat. 😀😊
@akshatgupta2897
6 жыл бұрын
@@chrclmnky☺️☺️☺️☺️☺️☺️
@akash1702
5 жыл бұрын
your pet is so cute 😘
@tuelho99
5 жыл бұрын
Nice Work bro👏
@a0r0a7
4 жыл бұрын
Quite excellent. Lovely build 👍
@chrclmnky
4 жыл бұрын
Thanks Andy
@toto073081
3 жыл бұрын
Nice. pulido ang pagkagawa
@chrclmnky
3 жыл бұрын
thanks
@mikeewerton4838
6 жыл бұрын
very cool, professional bait !!!
@a7am_music
5 жыл бұрын
Bro you are great, thank you❤
@chrclmnky
5 жыл бұрын
Hello Azam, thank you brother, I appreciate the feedback.
@sunilkumarverma6856
5 жыл бұрын
Beautiful product
@chrclmnky
5 жыл бұрын
Thank you Sunil.
@sunilkumarverma6856
5 жыл бұрын
Price kitna hai
@sivakumarmadala7271
4 жыл бұрын
Iam for India your video are good bro ❤️❤️❤️❤️
@chrclmnky
4 жыл бұрын
Thank you brother Siva.
@damiancontrera358
5 жыл бұрын
Excelente trabajo!!! Saludos desde Argentina...
@chrclmnky
5 жыл бұрын
Thank you Damian.
@kennethjudequimada1706
5 жыл бұрын
Ang gnda ng build nyo boss 👌👌👌
@chrclmnky
5 жыл бұрын
Many thanks! 😎
@Sunday_Jazz
2 жыл бұрын
So inspiring! Great job!
@chrclmnky
2 жыл бұрын
Thanks Paul
@singhhomeland
4 жыл бұрын
Best high quality brilliant work 🙏
@chrclmnky
4 жыл бұрын
Thanks
@bepbep7418
5 жыл бұрын
Magnetic held speaker grill would finish them off nice imo. Nice job though
@akshithaelectronics5008
5 жыл бұрын
Excellent work
@Khushibarman20
2 жыл бұрын
Bro please fully mini dj setup making 👍👍👍
@chrclmnky
2 жыл бұрын
Ok 👌
@glengatt3941
2 жыл бұрын
They look great,I always wanted to do something like that I'm thinking of making subwoofers with the simbosen amps I watched a video he made 3 monsters with piek of 13kwatss
@chrclmnky
2 жыл бұрын
Thanks
@arbiebre889
5 жыл бұрын
Magnda sir.. malinis pagkagawa
@chrclmnky
5 жыл бұрын
Thank you Arnold.
@christiankeithmaderazo7557
4 жыл бұрын
Ang linis pagkagawa😍
@adriandejesus2945
5 жыл бұрын
Awesome job... Congra bro!!
@chrclmnky
5 жыл бұрын
Thanks very much
@Dantek0987
5 жыл бұрын
dapat my test para kumpleto ganda ng pagawa ng box
@0221jimmy
4 жыл бұрын
nice work there
@chrclmnky
4 жыл бұрын
Thanks Tivu
@SachinKumar-ye6wr
5 жыл бұрын
Nice box
@chrclmnky
5 жыл бұрын
Thank you Sachin.
@SachinKumar-ye6wr
5 жыл бұрын
Muje vi banwane hai
@SachinKumar-ye6wr
5 жыл бұрын
6206593295 WhatsApp Nambiar hai pilis bro
@ottosilva9843
5 жыл бұрын
Mano serviço de qualidade e outra coisa ,nota 10 pra VC ,bom sorte ...
@chrclmnky
5 жыл бұрын
Thank you Otto.
@ErCanEverything
Жыл бұрын
Well done my Friend🙂🤝🤝🤝
@chrclmnky
Жыл бұрын
Thanks
@ruberbass5922
5 жыл бұрын
me gusta, buen trabajo eso esta profecional!!!
@chrclmnky
5 жыл бұрын
Thank you Tijer Bass for the very inspiring comment. :)
@menezesarthur
3 жыл бұрын
Very nice work
@chrclmnky
3 жыл бұрын
Thanks again!
@MrTHANBAES
4 жыл бұрын
Beautiful work!
@chrclmnky
4 жыл бұрын
Thank you very much!
@IliyaOsnovikov
5 жыл бұрын
I have not noticed any gaskets on woofer, tweeter and terminal cup flanges.
@marwikscorner
5 жыл бұрын
Илья Основиков Also any absorber materiale in side is not present
@paramjeetkaur7629
5 жыл бұрын
Nice video
@TarynMilnes1
2 жыл бұрын
Those look great
@timschutte8310
5 жыл бұрын
,sweet, I saw the JBL subwoofer you put together to.
@chrclmnky
5 жыл бұрын
Yes sir.
@raushancontraction3693
5 жыл бұрын
I want to buy this speakers box
@stephinkachappilly6892
5 жыл бұрын
Wow amazing God bless you.....
@bariPlayer79
5 жыл бұрын
the speakers look nice, but at the end it could be demonstrated how the speakers play...
@chrclmnky
5 жыл бұрын
Hello, super thanks for the positive feedback. For the speaker sound demo, check out this video. kzitem.info/news/bejne/mIiq1ZmQpZ14nXY
@jay15vl
3 жыл бұрын
Perfect, nice job
@chrclmnky
3 жыл бұрын
Thanks a lot!
@tee-jaythestereo-bargainph2120
4 жыл бұрын
Good job !
@ludovicopeluche8729
5 жыл бұрын
Excelente trabajo...
@chrclmnky
5 жыл бұрын
Gracias, Ludovico.
@daxtech2006
5 жыл бұрын
Kevler,magnum,crown dividing network from raon.
@chrclmnky
5 жыл бұрын
Yes sir. All parts available locally.
@myheaven2626
4 жыл бұрын
You could have play it to make it more exciting
@iridecdo5604
5 жыл бұрын
as what i've spected sir. ur from Ph. 😄 the moment na nakita ko yung pader eh sure sa pinas to hehe. sir ask lng favor pwde po pa list down po ng mga power tools nyo po? gusto ko rin mga woodworks lalo pagdating sa music/sound system.
@learner72
4 жыл бұрын
Fantastic looks
@chrclmnky
4 жыл бұрын
Thank you Naveen.
@deniscristhian4603
5 жыл бұрын
Eu gosto de caixa assim dessa maneira, e pequena e cabe em qualquer lugar, se tivesse condições compraria as duas rsrs
Пікірлер: 2 М.