Perfect timing on this video. My daughter has asked me to build one for her. Looks good.
@wooddoofus
2 жыл бұрын
Great! Always glad to be a part of the process. Thank you and good luck on your project!
@MurseKenny
Жыл бұрын
I've recently brought my woodworking Hobbie to a part time side business. Just got an order for a custom hall tree. I'm definitely going to use a lot of your tips to help out with the build!
@wooddoofus
Жыл бұрын
Great! Glad I can help out. Thanks for watching.
@limuitems4166
2 жыл бұрын
Wow❤❤❤❤
@jfred1924
2 жыл бұрын
And…… it turned out awesome 👏 👍✋
@wooddoofus
2 жыл бұрын
Thank you!
@imsowright90
Жыл бұрын
Looks nice. Getting ideas to build one.
@wooddoofus
Жыл бұрын
Thanks for checking it out!
@ShaneS7230
2 жыл бұрын
Very nice!
@wooddoofus
2 жыл бұрын
Thanks pal!
@Ryan82288
2 жыл бұрын
Only thing I wonder is if the bench since it’s glued like a table top will split over time since it’s screwed in from the top piece and there’s no movement allowed?
@wooddoofus
2 жыл бұрын
Not sure if I understand how's there's no movement allowed? The top peice is not glued to the bench top. There are only a couple screws that hold it down that are perpendicular to the grain. Other screws are along the back which are along the grain and won't interfere with movement.
@Ryan82288
2 жыл бұрын
@@wooddoofus ah i see only reason I asked is because I’m building one for the first time and that was my only concern of attaching the top to the bench. I always hear of horror stories of bench tops or table tops needing movement and splitting without proper fasteners.
@wooddoofus
2 жыл бұрын
Oh oh oh. That's a good clarification. I filmed it but kinda skipped over the fasteners. For this, I used figure 8 table top fasteners that allow for movement. These and z clips are very popular to allow for movement. I think my tilt out trash cabinet video (part 2) explains the figure 8s in some detail. Take a look if.you have time and thanks so much for watching!
@TheZinminjr
6 ай бұрын
Why have 2 halves of wood and have to use inserts with dows and glue? You don’t / can’t have a longer piece of wood?
@wooddoofus
6 ай бұрын
If I understand you, you're wondering why I don't find a solid peice of wood to the bench top that's 18 inches wide? Since I wanted my top to be solid oak, I used the oak boards that I had on hand and it's very typical in woodworking to edge join solid wood. An 18" wide board would be difficult to find and expensive. One option would be oak veneered plywood but I would still need to cover the plywood edge with solid strips of oak. Hope this helps.
@mikebari3225
Жыл бұрын
Just curious about how did this take start to finish ?
@wooddoofus
Жыл бұрын
Ok think I got it done in just one weekend. Thanks for watching!
@walterrafaelchavez9945
4 ай бұрын
Do you have plans for this project..
@wooddoofus
3 ай бұрын
Hi! Sorry, no plans. I'm struggling to get to that phase. Thanks for watching!
@barrycarol49
Жыл бұрын
Why do you not have closed captioning? I prefer to watch KZitem with no sound so as not to disturb others. I very much like the design of your hall tree.
@wooddoofus
Жыл бұрын
Thank you! I'm didn't know I had had closed captioning off but I'll look into it. I thought it was a setting from the watchers side of things.👍🤔
@chiomaecheazu7417
Жыл бұрын
Do you sell plans for this bench
@wooddoofus
Жыл бұрын
Not yet. I haven't been organized enough to develop plans. This was a custom build but generally, I used 12 inch deep plywood on the top section. 16" deep sections on the bottom bench. The lengths can be whatever you want. The seat can be made of any solid wood. I used 3/4 oak and joined it with dowels. It was important to add a stretcher behind the panel at the point where the hanging hooks are so they have something to screw in to. Hope this helps. Thanks for watching!
@chiomaecheazu7417
Жыл бұрын
Do you build these for others please
@wooddoofus
Жыл бұрын
I do build these but I can only build for local folks or someone that can pick it up in Greensboro, NC. Not sure how close you are?
@chiomaecheazu7417
Жыл бұрын
Aww im in Florida. Thank you
@davidboston4574
7 ай бұрын
You should Sell the land for it.
@wooddoofus
7 ай бұрын
Well I a appreciate the comment but I got super confused by it. I finally figured out that you were probably talking about selling "plans". I guess auto correct gotcha 😁 but yes, I hope to one day be organized enough to sell plans.👍
Пікірлер: 30