Dude, that board is gorgeous!! I think it might be my favorite on the entire internet!!
@GoodViewWoodworks
3 жыл бұрын
Thanks bro!!!
@KMB23231
3 жыл бұрын
If you get a chance you should really try odie's oil. It's great, one part all natural. It goes on the same way, very small amount needed for large projects. Great video Nathan.
@brentweisenborn660
3 жыл бұрын
My tape just came in yesterday !!! So excited to use it, thanks Nathan for makin these videos and products
@GoodViewWoodworks
3 жыл бұрын
That’s awesome ! Thank you!!
@waynep7176
3 жыл бұрын
Thats bad ass fellas!!!
@GoodViewWoodworks
3 жыл бұрын
Thanks Wayne!
@wildcreatures9810
2 жыл бұрын
Spectacular board!!
@taylorsessions4143
3 жыл бұрын
It looks like a metallic tornado is ripping it apart! Good content as always! I can't believe it's a 18 minute video, it feels short watching it.
@GoodViewWoodworks
3 жыл бұрын
Ah man I appreciate that! Yeah the swirls came out great!!
@rubiomonocoatusa
3 жыл бұрын
Great video Nathan! Thanks for using Rubio!
@RikedePaula
3 жыл бұрын
I'am from Brazil! I'm wathing your video to try learnin how to apply expoxi in canvas. Always stay with lot of bubbles
@GoodViewWoodworks
3 жыл бұрын
Make sure that you continue to use the torch to pop the bubbles.
@gulfcoastgrainz2245
3 жыл бұрын
Kick ass Nate. Yall wearin that new Bosch out! I love mine. And half the price of an RO150 Lol. Keep it up
@GoodViewWoodworks
3 жыл бұрын
You know that’s right!!
@timmytube
3 жыл бұрын
That turned out really well, I like the silicone form too. I wish you sold them
@GoodViewWoodworks
3 жыл бұрын
Yeah same here! Maybe one day
@gregdietrich3324
3 жыл бұрын
I appreciate the Joe Dirt shout out!
@GoodViewWoodworks
3 жыл бұрын
Good catch!!
@mstev5956
Жыл бұрын
Great work - as always Any advice for a noob without a sanding machine like you? How to get it flat
@TournageDubois
3 жыл бұрын
That's awesome!!! Do you ever see significant chip out when using a planer instead of a drum sander?
@GoodViewWoodworks
3 жыл бұрын
Yes, when the blades are dull it will chip out.
@DavidHalpern2
2 жыл бұрын
You need to try Osmo Polyx!
@kandiecandelaria3134
2 жыл бұрын
What type of epoxy did you use that it set up in 24hrs? Did you use any mold release on the mold and if so which brand? Beautiful
@GoodViewWoodworks
2 жыл бұрын
I didn’t use any mold release at all. The epoxy was incredible solutions liquid plastic.
@deniseviehweg7
3 жыл бұрын
I notice your videos don’t usually show what you do on bottom - do you normally do the same finish on bottom?
@GoodViewWoodworks
3 жыл бұрын
Yes! Always finish the bottom the same way you finish the top!
@anthonycampos2887
3 жыл бұрын
Hey buddy I love all your videos. What kind of epoxy you recommend for pouring coasters and the holder for them is about 4inches deep no more than a .25in wide? Thanks 🙏
@GoodViewWoodworks
3 жыл бұрын
Any of the tabletop epoxies will work just fine
@rickwanless5738
3 жыл бұрын
Nathan just a quick question. You are using a lot of rubio lately, I have an outdoor table that is under cover would you recommend rubio or to seal both sides with epoxy. Your expertise would be greatly appreciated. Do you ship your tape to Australia
@GoodViewWoodworks
3 жыл бұрын
I would recommend Rubio for outdoor patio because they make a product specifically designed for outdoor use. As far as the tape goes, I can ship it to Australia but it probably won’t be cost effective. 😄
@bogdan9620
3 жыл бұрын
Hi. From where did you find a table mold (like the table metalic colour ) thank you
@lindaconway6146
3 жыл бұрын
How long did you wait to add the silver look epoxy? Also really nice
@GoodViewWoodworks
3 жыл бұрын
I added it right after pouring the black
@lindaconway6146
3 жыл бұрын
Thanks
@colemanaxtman2818
3 жыл бұрын
Where did you get the silicone molds from?
@GoodViewWoodworks
3 жыл бұрын
Hey I updated the link in the description. I got it from crafted elements
@Rosspilot
3 жыл бұрын
Do you check the moisture content before using pieces of wood that come from a downed tree? How long were those pieces in your shop before you made this?
@GoodViewWoodworks
3 жыл бұрын
I did, they have been in there for a few years
@ahmadkhawaja2203
3 жыл бұрын
Can i ask u a question plz
@ahmadkhawaja2203
3 жыл бұрын
If i want to cover a wooden rod which has 2o inches length How mucch epoxy i will need Plz tell in grams
@GoodViewWoodworks
3 жыл бұрын
What is the diameter of the rod ?
@ahmadkhawaja2203
3 жыл бұрын
@@GoodViewWoodworks diameter of the rod is 1.3 inches i just want to give a look of epoxy on rod so it looks like crystal from outside
@ahmadkhawaja2203
3 жыл бұрын
@@GoodViewWoodworks just want to cover a little bit with epoxy to give it a new look
@KraigElliottWW
3 жыл бұрын
Where did you get your forms?
@taylorsessions4143
3 жыл бұрын
Crafted Elements makes the forms, check the description for more details
@hhhgdhsdvxket1608
3 жыл бұрын
So much ear striped mammal Cambodian laid to rest stops on petticoat samples and cannot repay
Пікірлер: 50