FYI as a guy that used to do bedliners for a living, you don’t need to over do it with the sanding. As long as it’s scuffed up a bit it will hold. We used to scuff a long box bed in 10min with a belt sander
@meganstaack7802
2 жыл бұрын
That’s my man! I love you! ❤️
@kegslob304
2 жыл бұрын
The Raptor kit comes with an easy pour measuring cup. Did my bed last week with the same kit and it came out beautifully.
@jasonallred244
Жыл бұрын
We're you high when doing this? Face mask, no face mask ( you probably just messed up your lungs as this mist will go into your airway quick) spraying on concrete driveway, not screwing on pick up tube. Definitely a tutorial on what NOT to do....
@nrcurcio
Жыл бұрын
I've been watching many videos on applying this product deciding if I wanted to tackle this myself. I will definitely be doing it now because if you three clowns can do it, anyone can. Good lord. just kidding, turned out pretty nice... and for God sakes, the music during the time lapse makes me want to jump off a bridge.
@ssquaredcustomz8406
Жыл бұрын
HAHA well lmfao Thanks for watching at least. Good luck on the spray. Its actually a pretty easy thing to get done! As you can see lol
@CoryCrowe_
2 жыл бұрын
" as you can tell, I've done this before"
@walkerhaules
2 жыл бұрын
Couldn’t hit the hole with the lights on👀
@dogboyendicott5211
Жыл бұрын
😂😂😂
@ABrianLewisVlog
2 жыл бұрын
Joeys truck next
@andrewburden4205
2 жыл бұрын
I need the new tundra done when it comes in.
@kw-vu2ng
2 жыл бұрын
Nice Job! What size compressor do I need to apply this product?
@ssquaredcustomz8406
2 жыл бұрын
A good sized one is needed for sure. Needs to have the air volume to run the spray gun. I know mine ran almost no stop when I was spraying.
@DomsRusticGarageMore
Жыл бұрын
What was the outside temperature when you did this? should be at least 65 degrees?
@ssquaredcustomz8406
Жыл бұрын
It was chilly. I don't remember the exact temp. Bed has held up great regardless. The truck was back into the garage and left inside to full cure.
@jessecoletti9427
2 жыл бұрын
What's a good time to drop mine off ?
@JasonP32
Жыл бұрын
The camera palming 😂
@ssquaredcustomz8406
Жыл бұрын
It's a habit now 🤣🤣🤷♂️🤷♂️
@Fred_Durst1
Жыл бұрын
@@ssquaredcustomz8406 well, stop it. its cringe-y
@Daverodd06
Жыл бұрын
What compressor size did you use
@Daverodd06
Жыл бұрын
What compressor did you use
@ssquaredcustomz8406
Жыл бұрын
If I remember correctly I got the 27gallon fortress from harbor freight. Its been a good compressor so far.
@TN_HondaDad
Жыл бұрын
I always found it ironic that you must scuff up/mar up a perfectly good bed in order to apply a coating to protect the bed in the future from becoming scratched up? LOL
@lukeo9459
Жыл бұрын
Scuffing is needed for adhesion.
@xmas4203
2 жыл бұрын
That's ok, without guys like you, trump wouldn't have any supporters. 🤣
@ssquaredcustomz8406
2 жыл бұрын
Lmfao what? 🤣
@xmas4203
2 жыл бұрын
@@ssquaredcustomz8406 Sorry, that wasn't meant for you. LOL. You know how auto play switches to the next vid. But your vid convinced me to Raptor line my bed and it came out great!
@philburke1902
Жыл бұрын
@@xmas4203 You Biden supporters are why we need to do everything DIY because we can't afford anything anymore. Have a Bud Light Xmas. Oh, and try to reply to the right video next time...that was a real Biden move.
@xmas4203
Жыл бұрын
@@philburke1902 I'd do it myself no matter who's potus because I like doing my own work. And I'd never drink that piss water. And I'm going to go reply to the wrong video right now just to see you cry more like a rightie pu$$y. 🤣
@Ziggyzig213
Жыл бұрын
How many coats did you do? And how did that traction work?
Пікірлер: 33