You did this video 5 years ago and it’s still helping us all out!!! Appreciate it man!!
@kevincoffey6022
Жыл бұрын
So great that people like yourself share the tips, tricks & technological solutions you have come up with. Makes a big difference to those of us who view your videos.
@the45er
3 жыл бұрын
Good luck finding these poles right now!
@spdsprk1856
2 жыл бұрын
Just found this video and drove to Lowe's the next day and assembled my stakeout pole for about $13. Thanks my guy
@TexasCoastSportsman
2 жыл бұрын
I don't hit the water without mine!
@timothydockery2969
6 ай бұрын
What kind of pole did u find at Lowes.ive searched every wallmart for the pole he has no luck.i went to Lowes but found no fiberglass ones
@straylever7431
4 жыл бұрын
Wow. Thank you! I was looking at a $300 solution online when I came across this video. I realized that I have 3 of these eight footers behind my shed. Took one into my garage and found that it fits in the transom handles. $0.00 spent. Rod is now stowed down the port side of my Alaskan. I will try it out this week.
@TexasCoastSportsman
4 жыл бұрын
That is awesome! I'm all about repurposing materials for building new toys.
@tittalwax
4 жыл бұрын
OH WOW. Was just looking on Amazon for around 89 - 130. Definitely doing this.
@TexasCoastSportsman
4 жыл бұрын
Love mine
@melvinrubio2278
5 жыл бұрын
I drilled a small breather hole on the T, so the fumes from the 2 part epoxy could vent, and not push out any fittings when drying. Thanks for the diy. Tight lines.
@TexasCoastSportsman
5 жыл бұрын
That's a great idea. In the video you can see when I place the tee on the pole 1 end cap pushes off. No big deal just didn't account for how much air I was displacing.
@davidbergagnini2045
2 жыл бұрын
@@TexasCoastSportsman id suggest just put the caps on last after everything else is cured what little bit you add for the caps shouldn't effect anything.
@johndonovan5894
4 жыл бұрын
Thanks for speeding up the obvious parts, great idea too. On my way to WM.
@TexasCoastSportsman
4 жыл бұрын
👍
@davidmeeks2405
2 жыл бұрын
Call mine an anchor pole, but since my time on the water is done in the southeastern US I made sure to add a steel spearhead to it . Provides defensive action to take place at least 7' away from my body. Be safe out there.
@j.r.4113
3 жыл бұрын
AWESOME video! First of your's I've seen. I've been searching rods to do the same, stumbled across your video. I made it to 5:48, and jumped on the Walmart site. Out of 9 area stores, only one showed any inventory, so I rushed over. The associates couldn't find them, told me the inventory was wrong, goodbye, thank you, have a nice day. I asked about a clearance section, walked over, found 4 of them, and snatched them up. They are horribly faded, but seem solid. Liked and subbed, just because of this one video!
@TexasCoastSportsman
3 жыл бұрын
Nice! I have one store near me that has some but they don't show in their inventory. It's like having my own private stash when a want another.
@TheChico1332
3 жыл бұрын
Dude, many thanks…👊🏻…Just lost my expensive stick yesterday and was determined not to spend a ton of cash for another..
@davidcarpenter5043
3 жыл бұрын
and it you glue a 6" pink noodle to the top it floats when you drop it and is just soooooo cute!
@TexasCoastSportsman
3 жыл бұрын
All you're missing is black PVC fittings to make it suuuuper stylish.
@1960shakey
4 жыл бұрын
Not sure where you live.... But you’re Walmart is the cleanest, best stocked Walmart I’ve ever seen!!!!!
@TexasCoastSportsman
4 жыл бұрын
If I ever run into the manager I'll let them know you approve.
@AnAngryAngler
2 жыл бұрын
The poles were a pain to find. Lowe’s to the rescue. Used a T & 2 45 deg elbows. Skipped the JB Weld. Thanks for the vid
@davidbergagnini2045
4 жыл бұрын
A tip another video showed was make 3 lines on the fiberglass pole then push your handle on so the air has a place to escape then twist it to spread the jb weld around. Rest looked good.
@TexasCoastSportsman
4 жыл бұрын
That's not a bad idea!
@guyjackson4143
4 жыл бұрын
I found the poles at a local walmart on clearance for 3.50 each. Purchased two of them and 5.00 worth of pvc fitting and neighborhood hardware store and made two for my kayak. Thanks for the tip. Put part of a pool noodle around the top of pole if it falls in the end will float.
@TexasCoastSportsman
4 жыл бұрын
What? Your store has already clearance them! Man I might need to go buy a couple. I've got a boat project that I'd like to make a 12' for.
@guyjackson4143
4 жыл бұрын
Louisville Ky. Come on up we'll hit a couple of lakes that are within an hours drive. Remember to bring your "yak".
@stevenjacobs6934
4 жыл бұрын
I built the same thing...heres a tip, here in North east FL we have oyster beds, 1/2 inch metal wire conduit fits inside the other end ...stick it in about a foot or so and leave a foot sticking out and cut on a 45 degree angle...goes right through oyster beds like butter...without this the fiberglass will shatter over time.
@TexasCoastSportsman
4 жыл бұрын
So, slip 1/2" electrical conduit over the pointed end to form a metal tip? Nice! How tight of a fit is the conduit? Do you think a decent length piece would add enough strength to join 2 together for a 12' pole?
@davidlewis9572
4 жыл бұрын
I made one like that , put a T handle out of a sledge hammer handle cut off . Works great
@TexasCoastSportsman
4 жыл бұрын
Now that's a serious handle!
@jerry-381
4 жыл бұрын
I've made a bunch of these. IMO the 5 footers which are 1/2" diameter actually go in the bottom easier and are easier to pull out of the mud than the 3/4" diameter 6 footers. This time of year I've seen them for $2.97 at Walmart.
@TexasCoastSportsman
4 жыл бұрын
I checked my local store the other day and didn't see any but I didn't check outside... hmm
@lookin4lunkersfishing
4 жыл бұрын
I made the mistake of getting the green garden stake the first time I made one. Don't do that. It will bend and it will break. This fiberglass model is much better. Great video.
@TexasCoastSportsman
4 жыл бұрын
I used a telescoping aluminum pole for my first one. How I didn't bend that thing into a U is beyond me.
@DRPowell
4 жыл бұрын
I made the same mistake. They are made weaker than a soup can. I ended up cutting mine at the break and making a 3 footer to stick down scupper hole when I’m backed up into marsh grass. The T handle has a V recess so it doubles as a rod rest.
@vordejp
4 жыл бұрын
I agree! What about the boat hardware into which this pole is inserted? Any DIY instructions for that? Thanks!
@milsurprifles
3 жыл бұрын
If it’s a 3/4” pole, it should fit through a scupper hole and work pretty well. Get perpendicular to the current, and you can put it in front or back scupper hole, depending on which way you want to be facing. 👍
@bpierson1013
3 жыл бұрын
I use my anchor trolley ring.
@NoOne-Home
2 жыл бұрын
Dude I’m getting this tomorrow! Brilliant
@allkindsofoutdooractivities
Жыл бұрын
Nice build. I had two of these for my boat. Cheaper than a power pole
@mikesimek6448
3 жыл бұрын
I can’t find these poles anywhere anymore, it’s crazy how a year makes such a difference
@dadsquatch79
3 жыл бұрын
Yup. I've been looking too...
@burtonk39
4 жыл бұрын
Thank you for this idea. I walked into the garden shop and the fiberglass stakes were the first things I saw.. I constructed the poles with ease. I have not used it. Thanks again for the idea...
@TexasCoastSportsman
4 жыл бұрын
Awesome! I need to pick up another for my new micro skiff project.
@280Ackley
4 жыл бұрын
Did that over a year ago! Tight lines!
@TexasCoastSportsman
4 жыл бұрын
Tight lines!
@derekcheung1388
4 жыл бұрын
50 bucks for a sharpen pole?? Heck no! Thanks for the great easy build!
@TexasCoastSportsman
4 жыл бұрын
Enjoy, it charged my life in the kayak. I can deploy mine with one hand while fighting a fish.
@stevemiller8239
3 жыл бұрын
UM.....I do not know if I like the build or the song better. LOL Thanks!!! Will definitely give er a go!
@withoutprejudice8301
3 жыл бұрын
JB weld only needed on the fiberglass rod to PVC "T". Pvc cement adequate for remainder of project.
@TexasCoastSportsman
3 жыл бұрын
True but if you already mixed some up... My nephew did a variation where he only used the tee. Leaving both ends open to run his tether through.
@FG-qh7qx
4 жыл бұрын
Dude that's awesome! I'm so pumped. Years a go I purchased an 8 foot stick out pole for $85 for my boat. And now I'd like to make one for my kayak. Thanks brother...
@TexasCoastSportsman
4 жыл бұрын
That is awesome!
@ramboatpapayak3047
4 жыл бұрын
Howdy TCS. Just found your channel and subscribed. Built identical stick for my yak for $16 in 2018. It's a great cheap option, but not good for all situations. Results vary depending on bottom structure. Firm sand or rock is a no go. I mostly fish soft mud/sand mix. This garden stake works fine in certain situations, but tends to pull out of soft bottom in windy conditions and water +3' deep. Good job on the DIY vid.
@TexasCoastSportsman
4 жыл бұрын
Thanks for the sub! I keep telling myself I need a throw anchor for hard sand and shell bottom, but then I chase the reds up into the marsh and it doesn't matter any more. I've had a time or 2 when it wouldn't hold but most those cases the tide was dumping water like a ragging river. I've harpooned my into over 6' deep water to stick in the bottom and had it hold me. That's a crazy feeling throwing your stake like a spear and hoping the para-cord holds so it's not the last time you see it.
@BeetleBuns
3 жыл бұрын
yo thanks for making this video! Now if you'll excuse me, I'm off to the store...
@SchlitzOutdoors
5 жыл бұрын
Yes!!!!! Can't Wait to use it
@TexasCoastSportsman
4 жыл бұрын
Don't let it get buried to far in the garage this winter. You'll need it again next year.
@240LTS
4 жыл бұрын
... Because of the very soft (silt) bottoms where I fish the pole needed to be longer to penetrate deeper for the holding power. I bought from Graingers, Rod Stock, Polypropylene, 3/4 In., 120 In. Added, like you did, a T on the top and sharpened the bottom. Use a 6'+/- rope from the T to the boat cleat on my Triton 240 LTS. Holds very well. .
@TexasCoastSportsman
4 жыл бұрын
Nice!
@americafirst423
4 жыл бұрын
Went to Walmart, Lowe’s, home depot yesterday and all I found was plastic coated steel tomato poles. Still on the hunt...
@TexasCoastSportsman
4 жыл бұрын
If you're in The Houston TX area I know one store that still has them. I just picked up 2 more yesterday to possibly make a 12' push pole. Though I'm a little concerned about the weight.
@americafirst423
4 жыл бұрын
Texas Coast Sportsman naw Billings Montana but appreciate it brother. I’ll check when get back home to Florida
@MrDanielmarlowe
5 жыл бұрын
Headed to Walmart now! Thanks for this helpful info!
@TexasCoastSportsman
4 жыл бұрын
Any time!
@LCon30
4 жыл бұрын
@@TexasCoastSportsman the PVC epoxy held the fiberglass ok?
@michaelburke5907
4 жыл бұрын
Love the surf music from my era, dude! Cowabunga.
@TexasCoastSportsman
4 жыл бұрын
I was raised on surf! Nothing says get on or in the water like surf music.
@matruthn.m.bassinGanGanG
2 жыл бұрын
Looks like I’ll be rocking the purple stake out pole 🤘🏼🤘🏼🤘🏼🤘🏼
@theguywitheyebrows
2 жыл бұрын
most brilliant idea eever, thank you so much for sharing!
@johnm1898
4 жыл бұрын
Great idea. Thanks. 👍
@TexasCoastSportsman
4 жыл бұрын
Can't live without mine! I've got a Skiff project I'm working on and need to make another.
@opuntina
2 жыл бұрын
Well shoot. Guess I know what I am doing this weekend.
@johnbaker4847
4 жыл бұрын
Walmart was out, got mine at Lowe's. Works fine, thnx. 👍
@TexasCoastSportsman
4 жыл бұрын
Good to hear!
@67bradenlee
4 жыл бұрын
Bro!!! I am doing this, this week!! And looks like my Walmart and Home Depot... off 1960 maybe? Anyway thanks!! Let’s fish one day!!!!
@TexasCoastSportsman
4 жыл бұрын
I didn't have any luck with Home Depot. I'm always down to fish!
@67bradenlee
4 жыл бұрын
Texas Coast Sportsman went to Walmart and they didn’t have any. Can’t find any in the website either. That Walmart in the video looked exactly like the one I was at too. Same umbrellas and they were in the same spots also 😂😂
@TexasCoastSportsman
4 жыл бұрын
That's funny but not funny, they seem to be flying of the shelf this season. Had another guy in the Houston area say he was having to check another store. I've been keeping my social distancing at a high level so I haven't checked my Walmart recently.
What type of metal? I knew a guy that liked using a copper tee. He was always concerned about a glue ability to bond with copper. So, he drilled and through bolted the tee to the handle.
@bushpilotdude7154
3 жыл бұрын
If you use 1/2 “ schedule 40 it fits good and tight.
@barrymcghee1
4 жыл бұрын
I needed this so bad. Thank brother!
@TexasCoastSportsman
4 жыл бұрын
Don't know how to fish with out mine anymore.
@MrSparkums
2 ай бұрын
Apparently they are no longer available.. Great vid!
@wesstrong3482
4 жыл бұрын
Any chance of a link to hardware you used to build attachment on boat? TY
@whyohwhy357
4 жыл бұрын
The list is in the info tab
@hmanone1063
4 жыл бұрын
Great video. Gonna head to my local WM tomorrow...fingers crossed! New sub from Tampa!
@TexasCoastSportsman
4 жыл бұрын
Thank you for the sub!
@davidhalesmith2491
3 жыл бұрын
Great idea. I lost a $100 sand spear on the first day I had it out!
@TexasCoastSportsman
3 жыл бұрын
First trip out in my kayak I flipped and almost lost 2 rods. I got lucky and recovered them out of the marsh mud.
@rick4649
4 жыл бұрын
How did you attach the pole to your boat ?
@igorfargadoo
3 жыл бұрын
Same question...
@jtotherog
7 ай бұрын
I left my t fitting hollow and tied a rope thru it
@j4kethegreat91
6 ай бұрын
Use a flag pole holder with a pvc extension to the same T fitting on the end for the pole to go through.
@randallcorbello2857
2 жыл бұрын
Thanks for the video in the information
@NCFishingandOutdoors
4 жыл бұрын
Nice! I'll be checking out the local Walmart now. Getting a new Hobie soon, gonna need one. Thanks for the video bro!
@TexasCoastSportsman
4 жыл бұрын
Glad you enjoyed it and congrats on the Hobie. Hope to see you on the water.
@andrewcahilly6264
Жыл бұрын
Great idea thank you
@brunocauin
Жыл бұрын
Man I'm about to cry ovah heah... Such an awesome DYI project but can't find these poles anywhere here in FL! 😭
@kennissen3201
4 жыл бұрын
Just found your channel ... very sweet information
@TexasCoastSportsman
4 жыл бұрын
Glad you found it useful!
@kevincoffey6022
Жыл бұрын
This was great. Thanks
@scoot6Tx
5 жыл бұрын
this saved me alot of money thanks alot bro
@TexasCoastSportsman
5 жыл бұрын
That's awesome!
@thenextfishingadventure202
4 жыл бұрын
Awesome! Thanks, I'm gonna go out and build mine this weekend! 🤙🏾
@TexasCoastSportsman
4 жыл бұрын
With the wind we've had this spring on the TX coast you need one
@TheNCTurner
2 жыл бұрын
Great idea, K.I.S.S.! But, I’ve been searching for these poles and can’t seem to locate one anywhere!!! I’m dying, and help would be great! TIA
@OFFFishing
3 жыл бұрын
Very cool I'm gonna try this out, thanks for sharing 👊
@TexasCoastSportsman
3 жыл бұрын
You bet
@jamesscarberry3128
4 жыл бұрын
Dang! Thanks great video and information.🎣🐟🐟🐟🐟👍
@TexasCoastSportsman
4 жыл бұрын
Thanks!
@larrybalowski946
Жыл бұрын
miracle grow does not sell it no more so dont bother got to find another way
@ronaldcarroll4995
3 ай бұрын
Wonderful command of the English language, not
@lilclm64
4 жыл бұрын
awesome dude picked one up today.
@TexasCoastSportsman
4 жыл бұрын
Nice!
@russellkasprzyk4934
2 жыл бұрын
Super stick makes a good one for about 65 bucks if you don’t feel like building it…free shipping on Amazon….this is a really good idea tho
@mmchallengerfishing6517
4 жыл бұрын
Great video
@TexasCoastSportsman
4 жыл бұрын
Glad you enjoyed it!
@trippgannon4751
3 жыл бұрын
Bro thanks so much. This video saved me 65 dollars. I got that green pole that was next to the pink one you grabbed because Lowe’s was out of the pink ones. Got mine for 11 dollars with the cpvc. Just one thing, how do you stake it into the water without putting it in your scupper holes. I heard they break from the pressure. Thanks.
@TexasCoastSportsman
3 жыл бұрын
I use an anchor trolley so, I can position the pole at the front or rear based current. Plenty of people stake though a scupper hole I'm light current.
@davidwhitehead9792
4 жыл бұрын
Great video thank you making mine today
@TexasCoastSportsman
4 жыл бұрын
Hope you like it!
@atstupenas
4 жыл бұрын
Thanks for showing us how to walk in walmart!!!!!
@TexasCoastSportsman
4 жыл бұрын
Hey some people need the encouragement to get out there in the big world. I'm here for you!
@rc5566
4 жыл бұрын
Now that's a funny comment!!!! Made me laugh.
@kw7796
8 ай бұрын
awesome
@chronicawareness9986
4 жыл бұрын
the song at 4:50 is funny lol.. "ummm"
@TexasCoastSportsman
4 жыл бұрын
Just felt like it fit
@TexasCoastSportsman
4 жыл бұрын
It was on a "royalty free" list on KZitem. The title and artist are listed in the video description.
@kevinmusser2724
4 жыл бұрын
Nice Tutorial. Thanks for your time to create it. I was going to put one together, unfortunately I cant find the fiberglass stake. None at Lowes, Home Depot or the Walmarts around the Delmarva Peninsula. Its almost like they have been discontinued. I was looking for them before all this Covid shutdown started so i don't think its because of that issue. I can buy the blanks online but with shipping i might as well buy the Yakgear or yakattack stake out poles. Any Sugestions?
@TexasCoastSportsman
4 жыл бұрын
Online I was finding the same thing before I found these. I had thought about calling around to nurseries since we are using tree stakes. Maybe a specialty garden center will have them.
@mikedietrich5930
5 жыл бұрын
Wonderful solution. Can you detail how they connect to the boat? I have a Carolina Skiff and would like to try this option.
@TexasCoastSportsman
5 жыл бұрын
For a skiff it could be as simple as a metal ring attached to a tie down cleat with paracord. There are several manufacturer of hard mount tubes that give you more of a power-pole effect. Those mounts usually start in the $200 range.
@tedsell1455
5 жыл бұрын
Could also make it a little longer with the cpvc tubing 🐟 nice work
@TexasCoastSportsman
5 жыл бұрын
You could! So far 6' has been a good length for me. The bays I fish it's not often I need a longer pole.
@larrybalowski946
Жыл бұрын
WHat kind of fitting can you get to make it long shorter to take apart would be awsome buy 3 poles and make short ones
@vtxdaryl
Жыл бұрын
Why didn’t I watch this video before I ordered one on Amazon.
@jakeslife1481
3 ай бұрын
Can’t find those stakes anymore, what a shame
@TheBayoubreeze
4 жыл бұрын
Awesome!!
@TexasCoastSportsman
4 жыл бұрын
Thanks!
@johnwedgeworth4908
3 жыл бұрын
Been looking for one of those purple fiberglass poles made by miracle gro for over a year, no luck…
@davescheer5038
Жыл бұрын
I got 3 Wally worlds by the house I hope they still carry em , I need one of these are they hollow or solid fiberglass?
@GolaBoyAdventures
7 ай бұрын
I cannot find this fiber glass pole in Walmart anywhere, is there any recommendations where I can find it? If not is there a way you can send me one?
@randallcorbello2857
2 жыл бұрын
I am having trouble finding those pole
@slugcatcher5558
2 жыл бұрын
Me either. Out of stock everywhere. I might try the plastic coated steel Vigoro pole at Home Depot.
@robertsylvester4704
7 ай бұрын
Did I miss how long the pole is?
@Goober22Pwns
3 жыл бұрын
Any ideas for storage for this pole anchor on a kayak
@TexasCoastSportsman
3 жыл бұрын
While on the water I use the bungie strap used to hold a paddle to the side of the yak. I have one on both sides of my yak.
@davidvanwinkle5648
5 жыл бұрын
These look way better than the pvc ones I've been using...do you think a 3/4 coupler would be strong enough to hold 2 of these together to make a 12 ft pole if I epoxy them in.. I'd like a 10ft one so I can cut a couple feet off... thank you for sharing this video
@TexasCoastSportsman
5 жыл бұрын
CPVC or PVC coupler may be a little short to build in strength. Maybe look at copper tubing couplers to see it they're longer.
@davidvanwinkle5648
5 жыл бұрын
Ok I'll check into that.. thank you
@tedsell1455
5 жыл бұрын
I would use aluminum tube longer
@adam82w7
4 жыл бұрын
Did anyone actually successfully couple these?
@larrybalowski946
Жыл бұрын
but your video was very good
@jayward7536
2 жыл бұрын
No one sells these poles anymore dam
@MSmith-jf5wo
4 жыл бұрын
Need that for my Titan, for sure! Don't know if Wally World has those "sticks" this year (with the Kung-Flu going on), but I'll look for'em for sure! (S/S Pop Rivets do the same "trick" as the Epoxy?) Thanks for the "Nifty" idea... (Now, to invent a pulley-system or a cheap Motor Drive for it...!) Haha!
@TexasCoastSportsman
4 жыл бұрын
There are guys using a plastic electrical box and pulley to make a "auto deploy" anchor. It uses the rod weight to drop and stab the bottom. Even saw the dude on Tiny Boat Nation build to for his aluminum boat conversion.
@jamesduncanson5316
4 жыл бұрын
Texas Coast Sportsman do you have anything showing how they did that? Sounds awesome!
@TexasCoastSportsman
4 жыл бұрын
Search "diy kayak anchor pole" look for thumb nails that show a grey 4x4 box mounted to the kayak. For now I'm good with manual (spear stabbing) deployment.
@cattaraugustonawanda4426
3 жыл бұрын
Sadly I can't find the stakes, only flimsy garden stakes.
@rtoweprojects
4 жыл бұрын
This might be a stupid question but, what is that stake out pole for?
@TexasCoastSportsman
4 жыл бұрын
You stab it into the ground to hold you position. It's alot simpler than throwing an anchor. I've gotten to where I can release and plant my pole 1 handed while fighting a fish. I do this when I don't ant to be pulled on top of the spot I was fishing.
@brentcarr8365
Жыл бұрын
Have you tried this and does it hold up good
@bradfordpalmer2298
4 жыл бұрын
Handle. Great. What about the other end? How long was the pole? Could you make it longer?
@TexasCoastSportsman
4 жыл бұрын
The pole is 6 foot and the other end is pre-sharpened. I haven't experimented with making it longer yet. The question is if you are using this pole what do you use to join them that will be strong enough.
@mikegay4
4 жыл бұрын
@@TexasCoastSportsman JB weld a threaded male adapter or union to the fiberglass pole and do the rest in pvc to extend and break down? May be a good way to add length when needed. Not sure how well the pvc extension woul work..
@Raven-jn6pw
Жыл бұрын
Are they still available? I haven’t seen them.?
@NativeSteel87
3 ай бұрын
Can't find these poles anywhere
@wagerbaits
2 жыл бұрын
Walmart No longer has these rods
@alexval2464
3 жыл бұрын
are those stick flexible and unbreakable? it will be a good idea to tie a flaoti red ball on the top so other swimmers dont dive in to it and have an accident
@TexasCoastSportsman
3 жыл бұрын
They are very stiff but do have some flex. I wouldn't say they are unbreakable.
@alexval2464
3 жыл бұрын
@@TexasCoastSportsman thanks
@ViolatorZ06
5 жыл бұрын
I just bought these stakes for 4.97 each!
@TexasCoastSportsman
5 жыл бұрын
I saw the same price the a few weeks ago. They're clearance to get ready for winter.
@ViolatorZ06
5 жыл бұрын
@@TexasCoastSportsman I just made two of them. I used 12 inches of pool noodle secured 3 inches under handle. Hoping that will be enough flotation
@TexasCoastSportsman
5 жыл бұрын
I keep mine tethered to my anchor trolley. Been known to throw it into the water like a spear if it's deeper than 6 foot.
@PGSTARR
3 жыл бұрын
I'd like to know the Walmart you walked into and found this 3/4 fiberglass rod. I have searched my eyeballs out and found nada. 16 April 2021.
@bpierson1013
3 жыл бұрын
Try a landscaping or farm & garden company. Ask for fiberglass tree stakes.
@colinjohnson4765
4 жыл бұрын
Well love the idea but no luck at finding the pole I’ve gone to Lowes Home Depot and Walmart no luck
@TexasCoastSportsman
4 жыл бұрын
Online I found them at Blain's Fleet and Farm. Shipped to me it was $23. You can check nurseries in you area. Ask for fiberglass plant stakes.
@colinjohnson4765
4 жыл бұрын
Okay well I’m gonna try a couple of some True value stores I don’t think ace would have them closet Walmart that has them is in FW Texas not really trying to make that drive during the week from Okc
@TexasCoastSportsman
4 жыл бұрын
Key phrase when searching is fiberglass plant stake.
@TexasCoastSportsman
4 жыл бұрын
Key phrase when searching is fiberglass plant stake.
@mikey6071
3 жыл бұрын
Cool, new subscriber brother!
@mikey6071
3 жыл бұрын
I'd like to see the mounted version on the boat build brother and how it works
Пікірлер: 300