Dennis is our past president (Mid South Woodturners Group) and a good friend. He is very well known for his acorn boxes with threaded lids. He's also known for turning really large bowls and art pieces. His jig is one of the easiest to make and use. You did a great job with your's.
@AsWoodTurns
6 жыл бұрын
Please give Dennis my thanks again. It was a break thru. Alan
@DIYTinkerer
Жыл бұрын
Awesome, I was speaking to someone this week who said he was cutting threads in wood with a Jig, I was astounded it was possible (I don't have a lathe (yet)) he tried to explain it but I I couldn't get my head around his explanation, seeing your video cleared everything up for me :-)
@AsWoodTurns
Жыл бұрын
Glad to help. Alan
@mitsukowalker5831
5 жыл бұрын
Ah! You get the gold star for this one!!! Well done! Very well done. I was hoping to find "this" so I'd not have to spend all that $3-$400 in England!! So, you did your good-est deed for the year. You are indeed a good scout! Thank you. (Steven...M is my wife...)
@AsWoodTurns
5 жыл бұрын
Now you know the specs you should be able to source what you need. Alan
@dieiuai-malebenselbstgebau1523
Жыл бұрын
Thank you very much for sharing. I nearly lost hope, to find an affordable method!
@AsWoodTurns
Жыл бұрын
You're welcome!
@JimmiePorterAtStuartArts
6 жыл бұрын
Very cool process. Coincidentally I picked up an x-Y vise at a yard sale for a song. At the time I bought it I didn't have a use in mind but it was such a good deal I bought it anyway. And now your video...
@AsWoodTurns
6 жыл бұрын
Perfect = like it was meant to be. :) Alan
@lindacollier5177
2 жыл бұрын
Great demonstration! Didn't see reference to provide a stop for the depth the threads extend into the box or lid. Necessary to stop cutting at the same place with each pass. I use a one piece 3/4-16 threaded shaft locking collar available from McMaster-Carr to limit the all threads travel into the nut trapped in the vice. Two lock nuts could also be used jammed together as a stop. DLC
@AsWoodTurns
2 жыл бұрын
Great tip! Alan
@brianprocter6191
3 жыл бұрын
Enjoyed your video and picked up a few pointers, just made my first threaded box today on a set up i made. My idea was to use the metal lathe as it has gearing to cut any thread. Basically the wood was held in the chuck, and a dremel type unit mounted on the carriage, cutter runs at high speed. I ended up turning the chuck by hand as the lowest speed was to fast. I put the male thread on the lid. After that I was thinking of a way to just use the wood lathe, My idea was the same as yours, interesting, I was thinking mine would be the only one of that kind.
@AsWoodTurns
3 жыл бұрын
Machining items from wood or metal have been around for Many, Many years. Rarely is there anything truly new. mainly used in new contexts. Alan
@cyrilnorrie8450
3 жыл бұрын
This is an excellent video. You explained every step clearly and answered any questions I can think of. Thanks for the great job!
@AsWoodTurns
3 жыл бұрын
Glad it was helpful! Alan
@PopsShop
6 жыл бұрын
Way to go Alan! I’m still trying to get the hang of the thread chasers. One day I’ll get it! Thanks for sharing.
@AsWoodTurns
6 жыл бұрын
Whichever works is great. I'll like being able to thread common wood. Alan
@spencerbrown2594
6 жыл бұрын
I thoroughly enjoyed and learned about threading. I looked for the tool list but didn't see. I would like to try it myself.
@AsWoodTurns
6 жыл бұрын
Time to watch the video again. Parts list is in the description. Alan
@philippboetcher9959
4 жыл бұрын
Thats such a lovely simple straight forward idea, love it!
@AsWoodTurns
4 жыл бұрын
Thank you Philipp Merry Christmas Alan
@davidshaper5146
6 жыл бұрын
You forgot the part about adding thin CA after you cut the threads and then screw it together. Nice video!
@AsWoodTurns
6 жыл бұрын
LOL Alan
@valval2407
4 жыл бұрын
Beautiful job Alan! Понравился способ нанесения резьбы, возьму на заметку !
@AsWoodTurns
4 жыл бұрын
Thank you Val Alan
@aggrovater
6 жыл бұрын
Great video never thought of using X Y vice for thread chasing only for turning small metal components on my wood lathe. Another project for me to do one day.
@AsWoodTurns
6 жыл бұрын
Sooner than Later? Alan
@bricoak
5 жыл бұрын
In the UK GWR Fasteners can supply the threaded rod and five nuts for about £20. Got mine and now for the brst part, building it. Thanks for the ideas. By the way, my small Axminster lathe came complete with the 3/4 to 1" adapter so they may sell it.
@AsWoodTurns
5 жыл бұрын
Thanks for your research. Alan
@RickTurnsWoodturning
6 жыл бұрын
Pretty slick, Alan!
@AsWoodTurns
6 жыл бұрын
It works for me. :) Alan
@nikburton9264
6 жыл бұрын
Great video, Alan! Thanks for the parts list.
@AsWoodTurns
6 жыл бұрын
Not a problem. Enjoy Alan
@Slemi
6 жыл бұрын
I wasn't watching whole video so I don't know if you addressed this, but you can avoid backlash of the nuts holding the lathe chuck, by just gently hitting one of the nuts with a hammer while they are not fully tightened.
@AsWoodTurns
6 жыл бұрын
My understanding is that any machine has backlash or else parts would not move and that it can only be minimized. But, thanks for the suggestion. I'll look for how it can be implemented. Alan
@woodturningguru8857
6 жыл бұрын
Hi Alan That looks a lot better than hand threading must see if I can get the wife to put it on my Xmas list. Great video as all ways. take care. Y.N.W.A. Paul
@AsWoodTurns
6 жыл бұрын
Don't rule out hand chasing but this will get you over the hurdle. Alan
@brownsuspenders7793
2 жыл бұрын
Awesome! Thank you
@AsWoodTurns
2 жыл бұрын
It works. Alan
6 жыл бұрын
Very clever, nice threads.
@AsWoodTurns
6 жыл бұрын
Thank you Tony. Alan
@tlewisdean8645
6 жыл бұрын
Alan, I was able to put your jig together and just finished my first successful threading. Thanks for the info. One or two small tips: I found that the allthread has a lot of slop, to fix this I wrapped the threads with 2-3 layers of pipe thread tape, no slop now. Instead of mag-locks I just side up the tail stock and lock it in place. I also bought some fittings for a 3/4-10 allthread and will try that for a coarser thread on larger boxes and urns.
@AsWoodTurns
6 жыл бұрын
Sounds like you caught the bug. Great Alan
@jimrobb6325
6 жыл бұрын
Nice one Alan. That looked a good thread for a long one. Probably half that will suffice when you make your boxes. That was one of the changes I made as my first boxes took for ever to open. :-) I had 7 threads. Good unit though and good fun. Thanks.
@AsWoodTurns
6 жыл бұрын
My metal monkey friends say that 1 and a half threads should be sufficient. But what do they know about wood? I'm planning on 3 to allow for adjustments until I have more practice. Alan
@jimrobb6325
6 жыл бұрын
Aye, one and a half threads would be a bit lean for wood. Three threads, I now find ideal myself. I have passed the link to your video on to a few friends interested on threading. Thanks again.
@LenHarms
4 жыл бұрын
Hey, I liked your demonstration a lot. I was thinking of making something similar. Did you want such a fine thread on your piece. I was thinking of just using a 1X8tpi threaded rod which is a rougher thread than the 16 you're using and since my chuck is 1x8tpi I wouldn't need an adapter. Just curious why you didn't go with a rougher threaded screw.
@AsWoodTurns
4 жыл бұрын
Since I'm 1.25x8tpi, this was the first setup that I could manage, I've subsequently adapted to a 1x8 that you suggest. Go fer it. Alan
@AndrewStokes1966
Жыл бұрын
Thank you
@AsWoodTurns
Жыл бұрын
You are welcome Andrew Alan
@erc7278
Жыл бұрын
Good morning, nice jig. Could you tell me the name of the cutter used in the router and which website to find it on? Thank you for sharing your knowledge..👍🏾👍🏾
@AsWoodTurns
Жыл бұрын
It is the 6th item in the parts list in the description. Alan
@kenvasko2285
3 жыл бұрын
There a lot of wobble in the all thread and nuts. Any ideas on how to tighten the tolerances? Thread tape?
@AsWoodTurns
3 жыл бұрын
Teflon tape and longer nuts both help. Use connectors if possible. Alan
@crackerjack3359
2 жыл бұрын
I suppose this works best if the center height of the all thread is the same as the lathe. But I'm also thinking that it does not need to be spot on. Am I correct in that assumption ? I have a jet 18/40 and I see no reason why this would not work if the vice has a thicker platform.
@AsWoodTurns
2 жыл бұрын
Most important is that it advances parallel to the lathe axis. Since you are cutting a round object without calculating exactly where things are, you will not notice the difference except on a very small diameter(that you are unlikely to cut). It would limit the diameter you can deal with. Alan
@thomasklink3766
6 жыл бұрын
Excellent gotta build one.
@AsWoodTurns
6 жыл бұрын
Not difficult. Go for it. Alan
@walshjp17
6 жыл бұрын
Excellent video, Alan. A wonderful 'everyman' project. I did not see the magnets (?) you used to hold the jig down on the lathe bed in the parts list. Did I miss something?
@AsWoodTurns
6 жыл бұрын
No you did not miss something - I did. I used MagJig 60 from Mag Tools. I would recommend Mag Jig 95 for a better hold. I've upgraded the description to include this. Alan
@mgdesigns37069
3 жыл бұрын
What mini lathe are you using in this setup? I have a Jet JWL-1014, and there's not enough room under the vise for a mounting board.
@AsWoodTurns
3 жыл бұрын
Rikon 70-050VS, a 12 x 16 lathe. it has an extra 1 of radius than yours Alan
@charlesreicks648
6 жыл бұрын
This is really good. Thanks
@AsWoodTurns
6 жыл бұрын
You are welcome Alan
@grantham418
6 жыл бұрын
Is there a reason you want 16 threads per inch? This seems awfully fine for wood threads. Why not just use 1" x 8 tpi threded rod and nuts? I use 60 degree angle end mills in my metal shop and find them much less expensive on eBay. Excellent idea and video as always. Keep 'em coming.
@AsWoodTurns
6 жыл бұрын
TPI probably falls into the personal choice category. The second demo used 10 tpi. Comparing the threads, I prefer 16. Your results may vary. I'd love a full range but that is not practical for a non-machinist. Thank you Alan
@terryvance9390
6 жыл бұрын
Thanks for a great how to video. I will be trying that out soon. Did I miss where you got the magnetic fasteners used to hold jig in place?
@AsWoodTurns
6 жыл бұрын
I used MagJig 60 from Mag Tools. I would recommend Mag Jig 95 for a better hold. I've upgraded the description to include this. Alan
@rgoodleaf
5 жыл бұрын
Question for you Alan. How do you align the center line of your threaded rod with the cutter? Do the center lines have to match or can the rod be higher/lower than the cutter?
@AsWoodTurns
5 жыл бұрын
Ideally, the center would exactly match the spindle axis. However, as long as the axis of the chuck on the rod is parallel with the spindle axis, you're okay. The only minus is that the minimum diameter that you can thread is larger. Notice that I said the chuck axis instead the rod axis. As long as they are parallel is does not matter if left, right, up, or down. same impact. The larger issue is if the axes are skew, meaning they are at an angle to each other. Then threads are cut deeper on one side than the other.
@gilgrace1915
6 жыл бұрын
Very interesting jig Alan. I was going to ask what sort of shank this cutter has, but I think I understand from the description that it is a 3/8" Diam. straight shank, correct? One more question, what RPM is recommended for the cutter?
@AsWoodTurns
6 жыл бұрын
I'm running it as fast as the lathe will go. The cutter also works in routers and other tools that run much faster. and it is only 3/4 diameter. A machinist could perhaps advise otherwise. Alan
@adriancrawford4200
4 жыл бұрын
Excellent video. Can I ask what type of cutter it is that you are using?
@AsWoodTurns
4 жыл бұрын
May I refer you to the description that accompanies the video. I try to put that information there. Alan
@rgoodleaf
6 жыл бұрын
I wonder if you could hold the thread cutter in a standard collet chuck. It would probably limit the depth of inside threads, but how much depth do you really need? This is a really neat project, but now I have to buy a new insert for my Nova chuck to convert it from 1 1/4"x8 to 1"x8, bummers.
@AsWoodTurns
6 жыл бұрын
Yes, if fact the 2nd demo I mentioned had his cutter held in a collet. If I had one already, I'd be good with it. Otherwise, a MT2 collet with drawbar is much less expensive. 1 1/4 vs 1 - Yeh I have the same problem. But there are adapters and inserts. Alan
@Unionboggle
5 жыл бұрын
Alan, thanks for the awesome video. I'm trying to design a custom pen with a screw cap. to reduce the thread size to the diameters I need, would it be as simple as swapping out the allthread with the size one needs? or does the cutter need to change as well?
@AsWoodTurns
5 жыл бұрын
you are correct on pitch. Swapping the allthread is the easy part. However, supporting the wood and chuck from the smaller allthread will be the first challenge. For something the size of a pen, you would need a cutter smaller than the diameter you are cutting for the female threads. That will be your second challenge. Alan
@Unionboggle
5 жыл бұрын
@@AsWoodTurns thanks for the reply. something I'm still thinking about...
@pacman10182
4 жыл бұрын
this is called thread milling, a similar process is used to make odd screw forms on a metal lathe
@AsWoodTurns
4 жыл бұрын
Thanks for adding that bit. Alan
@jameslarrimore1419
6 жыл бұрын
THANKS .
@AsWoodTurns
6 жыл бұрын
You are welcome. Alan
@rgoodleaf
6 жыл бұрын
I forgot to ask, what RPM is the cutter turning at?
@AsWoodTurns
6 жыл бұрын
As fast as my mini lathe goes. probably around 2,000 rpm. Alan
@tomwilhelm545
5 жыл бұрын
what about stabilize the wood first I use a lot of walnut ???
@AsWoodTurns
5 жыл бұрын
Stabilizing is a definite option to be explored. Alan
@RealRuler2112
6 жыл бұрын
LOL - 'Sloppy Fit Hardware Store'... =) I may have spent a few dollars there in the past... ;-) I was going to say that you should put a runner on the bottom of that vice mounting plate so that it rides on the ways of your lathe and would always be parallel with the bed to make things easier for the future, but saw that there's already on there. Why were you concerned about it being off? Hope you plan on turning that test blank into a box - doesn't look like it'd be too difficult to complete. =)
@AsWoodTurns
6 жыл бұрын
More money there than you'd like to admit? :) If not in alignment, then the threads would be skew to the box axis, leading to a bad joint between top and bottom. As is, it is not perfect but works fine. When I finish it, it won't take long at all. Alan
@giovannizunino6046
Жыл бұрын
È veramente interessante adesso che ti ho rubato il segreto anch'io ho modo di eseguire tutto questo ti saluto e buona giornata
@AsWoodTurns
Жыл бұрын
Si, you can Alan
@aussiman77181
6 жыл бұрын
hi where did the cutter come from?
@DerekCadmus
6 жыл бұрын
aussiman77181 MSC Direct.com
@AsWoodTurns
6 жыл бұрын
I second Derek's response. Alan
@tomasarguinzoni9022
6 жыл бұрын
Thank you for sharing great tips 👍🏼
@AsWoodTurns
6 жыл бұрын
You are welcome Tomas Alan
@electronic7979
6 жыл бұрын
Excellent
@AsWoodTurns
6 жыл бұрын
Thank you Alan
@spencerbrown2594
6 жыл бұрын
I found it with a simple click.
@AsWoodTurns
6 жыл бұрын
Excellent Alan
@hardtailsuicidaljockey6827
6 жыл бұрын
I'm just starting out and was wondering if you could thread wood now I know wish it was alot simpler and cheaper.......
@AsWoodTurns
6 жыл бұрын
Two ways to thread: 1) hand chase; 2) machine cut. Hand chase tools are not cheap. Commercial tools are definitely expensive. If you're just starting out, stick to boxes for a slip fit for a white. Alan
@robohippy
Жыл бұрын
Hmm, a good 'cheap' version. I learned on the Klein jig. I make the recess on my lids at 3/8 inch deep, and the tenon is 1/4 inch deep, which, in theory, leaves plenty of room to adjust the shoulder on the base enough to get the threads to line up. Bulls Eye spray lacquer works great on the insides. Smell is gone in a minute or three. Never use a solvent based finish as the smell will never go away.... One would think that the cutter will cut the threads dead parallel. They do that some times, and some times not. I use a six inch long steel rule against both tenon and recess and then eyeball to see if it lines up with the lathe bed, then cut. I use digital calipers to measure the offset needed. I cut lid/recess first, then tenon. Tenon is 0.06 bigger.
@AsWoodTurns
Жыл бұрын
Good Points. Alan
@ScrapwoodCity
6 жыл бұрын
Cool setup! I want to try this one! Thread chasing is a dream situation for me! Thanks for sharing this one!
@AsWoodTurns
6 жыл бұрын
A dream within reach now. It took me years. Alan
@Hoss_1966
5 жыл бұрын
I may have missed this, but you mentioned bit is 3/8" diameter, but what is the angle of the bit. thanks
@AsWoodTurns
5 жыл бұрын
Most threads use a 60 degree angel Alan
@ArcticFlies56
3 жыл бұрын
The missing link is solved. Great job! Best regards, Richard
@AsWoodTurns
3 жыл бұрын
You are welcome
@stephenmcfadyen1385
6 жыл бұрын
As Many of your viewers say, thread chasing is a bit of a dream and to me a dark art, commercial thread machines are expensive as you point out. Your contraption is great and I have started the process of building one, my only set back is trying to source the cutter here in Australia. Love your innovations keep them coming. Kind Regards Steve
@AsWoodTurns
6 жыл бұрын
I would think a 60 degree HSS cutter should be standard across continents. But yes, a local vendor would save a lot on shipping. Alan
@stephenmcfadyen1385
6 жыл бұрын
Thanks Alan could you suggest a US supplier that ships internationally
@AsWoodTurns
6 жыл бұрын
Please check with the suppliers that I identified. Don't know their policies. Alan
@lv_woodturner3899
6 жыл бұрын
MSCDirect will not likely ship outside the US. This supplier has the cutters for less than MSCDirect and states they ship worldwide. May be cheaper to find a Chinese source. www.maritool.com/Cutting-Tools-Keyseat-/-Milling-Cutters-Chamfer-Milling-Cutters-Double-Angle-HSS-Chamfer-Mills/c78_231_237_239_277/index.html Dave.
@stephenmcfadyen1385
6 жыл бұрын
Thanks Heaps will give them a go
@donbomer5630
6 жыл бұрын
Amazing tool Alan. I will eventually make one. And, you may have missed Gerald Jensen's reply to your's, replying to john b. It's for a modification to the XY Vise that looks like a "must have" to get rid of the vise problems. There's also a review of the vise at kzitem.info/news/bejne/upywp6SFbYRilYI with some tuning tips that may help.
@AsWoodTurns
6 жыл бұрын
In the video, he said he replaced all the hardware. From appearance and cost, I doubt that he replaced the lead screws. So far, I have replaced the side crank with the largest wood wheel I could fit. I've also wrapped teflon tape on the lead screw - it seems to have removed a lot of slop. May have to replace teflon periodically but it is cheap and easy.
@peterstenabaugh6810
2 жыл бұрын
I'd like to make a suggestion to you, about a couple of hacks to your threading setup. First off, this is really cool and very ingenious and I am going to make one in a similar manner. What I am doing is to install a medium strength, compression spring, about 4" long, over the threaded rod - between the 2 nuts that hold it in the vise. The pressure exerted by the spring will force the 2 nuts apart, as you are clamping them in the vise. This will then eliminate any backlash on the threaded rod, allowing you to cut more accurate threads. Don't use a really strong spring as that will make it more difficult to turn the rod. I am also using a piece of 7/8-14 threaded rod instead of 3/4-16. I think that 16 tpi is a bit too fine for some wood thread applications, so 14 tpi is a bit better pitch I think. 8 TPI and 10TPI are both a bit too coarse for wood working unless you had a very large and heavy duty project. Even better would be 12TPI but no one makes an adapter from 1"-8 to 1"-12. I found an adapter from 1"-8 to 7/8-14 on Amazon, it was just delivered today as a matter of fact. It will work good. I have another ordered for 1"-8 to 3/4"-10 but I doubt I'll use it very much. I will also install a metal hand wheel (4" diameter) on the threaded rod to make it easier to turn. It will give me smoother and more consistent rotation. I'll attach it with a key on the rod so I can remove it and move it over to the other rod if need be.
@AsWoodTurns
2 жыл бұрын
Sounds like a great solution to backlash. You nailed the issue with TPI. Glad you found the appropriate adapters. Alan
@lourias
3 жыл бұрын
This type of jig could be used without a lathe. A drill, clamped in place, and your vice jig would work... interesting. Thanks for posting.
@AsWoodTurns
3 жыл бұрын
that would be true. :) Alan
@bertdelisle393
6 жыл бұрын
Well done Alan. Now that you have threads the next challenge is to rig the jig to make it "bayonet" style for quarter turn closure.
@AsWoodTurns
6 жыл бұрын
Well Bert. You're just going to have to show me how! Alan
@bertdelisle393
6 жыл бұрын
I will take some pictures of my efforts to date. I did post a box on FB. I used a collet to hold a straight cutter router bit in the lathe, I mounted an indexer on a cross slide, the indexer holds a collect that holds my carving head spindle which matches my lathe chuck threads. the process is similar to threading except I remove portions of the threads on each part. I'm still learning but it is important to have the mating parts threaded and aligned BEFORE marking and removing threads. I made a ships wheel clamp to fit my chuck so I can control the rotation. I now use it for threading too, I had the chuck unthread from the threading jig once when I didn't have it tight enough. .
@terryvance9390
6 жыл бұрын
I made the jig and it worked well just sitting on a board. Would you share the dimensions of the base you used?
@AsWoodTurns
6 жыл бұрын
About 1.5" wider than the vise and about 4" longer to accommodate the magnetic clamps. Alan
@GeraldJensen
6 жыл бұрын
Alan ... Thanks for the video and parts list. I do some hand-chasing (Sam Angelo got me hooked), but I do most of my work in domestic hardwoods that don't take hand-chased threads very well. This approach looks like an ideal solution to the problem!
@AsWoodTurns
6 жыл бұрын
You are welcome. Sounds like your plan going forward is similar to mine. Alan
@edwinleach4013
6 жыл бұрын
Incredible!! I have wanted to venture into this arena but haven't done so yet. You have given me the perfect setup and info that I need. Can't wait to get it all set up. Were they some sort of magnet that you put in place to hold the device that holds the chuck and the all thread? Thanks so much.
@AsWoodTurns
6 жыл бұрын
Yes, I used MagJig 60 from Mag Tools. I would recommend Mag Jig 95 for a better hold. I've upgraded the description to include this. Alan
@mackk123
4 жыл бұрын
nice, i saw this process called thread milling on a vertical mill. this reminds me a lot of it. i was baffled when i saw the process
@AsWoodTurns
4 жыл бұрын
This would be a "horizontal" mill. not that much different. Alan
@kbrich2002
6 жыл бұрын
This one was especially fascinating to watch alan. Looks like a lot of work but another way to do thread chasing that I’ve never seen.
@AsWoodTurns
6 жыл бұрын
Then you did not attend Dennis' demo at the symposium. He filled in the blanks for me. Alan
@wb_finewoodworking
6 жыл бұрын
Fascinating idea and execution. Thanks for sharing.
@AsWoodTurns
6 жыл бұрын
You are welcome Alan
@tcnesa
4 жыл бұрын
Explained very well. The set up is just Fantastic. Thank for sharing
@AsWoodTurns
4 жыл бұрын
It works. Happy New Year Alan
@thecajuncoopersworkshop7279
5 жыл бұрын
Excellent idea thanks for posting this!
@AsWoodTurns
5 жыл бұрын
You're welcome. I try to pass on great ideas as I come upon them. Alan
@keithkelley7512
6 жыл бұрын
absolutely outstanding! Thank you. Ordering parts tomorrow..........
@AsWoodTurns
6 жыл бұрын
That's about what I did. :) Alan
@genemiller4965
6 жыл бұрын
GOOD INFORMATION, PRESENTED WELL. THANKS FOR SHARING.
@AsWoodTurns
6 жыл бұрын
You are welcome Gene Alan
@aggrovater
6 жыл бұрын
Just an after thought you can take some of the play out of the chuck thread .buy putting a spring between the chuck adaptor and thread nut. it will take some of the backlash out.
@AsWoodTurns
6 жыл бұрын
The backlash that I'm worried about is in the XY Vise. I'll look to see if I can get a spring in there. Thanks. Alan
@GeraldJensen
6 жыл бұрын
Don't know if it would solve problems with the Harbor Freight vise, but this guy sells a 'Correction Bracket Kit' that might be worth a look: kzitem.info/news/bejne/xmeKv4Gmn5F3g5w
@donbomer5630
6 жыл бұрын
Thanks Gerald, That seems like a great modification.
@rimar2000
6 жыл бұрын
Excellent tool, master.
@AsWoodTurns
6 жыл бұрын
Gracias Osvaldo Alan
@atifali4703
3 жыл бұрын
Amazing man.
@AsWoodTurns
3 жыл бұрын
Glad you think so!
@oneshotme
6 жыл бұрын
Enjoyed!!!!
@AsWoodTurns
6 жыл бұрын
Great - Do you want to try? Alan
@matthewharvey8755
5 жыл бұрын
Subscribed. Loved it, going to HF for parts soon lol
@AsWoodTurns
4 жыл бұрын
:) Sorry your comment came during a KZitem changeover and I did not see it promptly.
@matthewharvey8755
4 жыл бұрын
@@AsWoodTurns haha, you have made up for it 100x over. In 10 months I have been entertained time after time, and you never disappoint!
@dekopuma
5 жыл бұрын
The design of this jig is brilliantly simple. I was wondering how you would control the spacing, but the all thread takes care of all that for you. I might have to get the parts and give this a try.
@AsWoodTurns
5 жыл бұрын
You are correct. They key component is the all thread followed by how to mount a chuck to the all thread. Worth doing. Alan
Пікірлер: 170