Looks like a good heavy duty bead breaker. I bought 3 Harbor Freight tire tools/spoons and got a couple of short sections of like black pvc pipe and cut three 6" sections and heated them with a heat gun, slid them over the spoon ends and heated them more to where I could form them over the spoons to match the contour better. They will help keep from scratching rims like painted steel rims or aluminum etc etc. A heat gun can heat pvc pipe or material to the point that it melts so it can be shaped and formed over just about any surface and then cool down to hold that shape.
@dustyroads834
Жыл бұрын
I just had one of those. (Why didn’t I think of that ) moments. Nice simple tool. Thanks.
@garyjordan3181
3 жыл бұрын
You have invested in a good set of tire irons there spendy but well worth the cost. I took a wire wheel on my grinder and put oil on the spoon and buffed it into the steel which makes them even better. They slide on the rubber with a little tire lube mixture so they don't cut the bead. Good video 👍
@itchyoldfart
3 жыл бұрын
Good tip ...thank you brother... I'll try that
@Regency-t1n
3 ай бұрын
Awesome . I weld . But I haven’t got the chance to become creative to build a bead breaker yet .
@peterevans8194
5 ай бұрын
You did a really good job making that, excellent bit of kit, easy enough to carry with you too if you are overlanding...Do you think it would be ok on a alloy wheel, or likely to damage it? Not to take your thunder, but for people who don't weld, there is an excellent alternative made of wood..Just search for "DiY Bead breaker" on Sam's Hammers KZitem channel...More aimed at dealing with standard size car tires than your monsters lol.
@itchyoldfart
5 ай бұрын
Thank you, I can't see how this would damage alloy wheels
@efrenhernandezmeza9732
3 жыл бұрын
Muy buen invento para desmontar una llanta te has ganado un
@ivanahumpalot7346
2 жыл бұрын
thats a really nice bead breaker, nice simple design.excellent
@thai.tv.you.
3 жыл бұрын
You are very good at making a tire press machine that works very well.
@-SF1-
5 жыл бұрын
Ingenious design. Cant wait to see the new beadlock wheels on the old M37 beast.
@itchyoldfart
5 жыл бұрын
Thank you brother
@Nature-bt5ip
7 ай бұрын
Super tool mate
@montwolfman
5 жыл бұрын
Outstanding. Must have. Gotta do. Thanks for posting.
@pawelzimny6867
4 жыл бұрын
Very nice tool, sure very helpful. I am going to do something like it. Once again well done.
@itchyoldfart
4 жыл бұрын
Thank you brother .good luck with it
@charlesdyer2376
5 жыл бұрын
I'm diggin the ol Harley In the shop !!!
@itchyoldfart
5 жыл бұрын
It's a 1937 ULH police special
@fredmasse6451
2 жыл бұрын
Me too, I see this nice bike on back 😄 It’s a 45ci ? Good job with the tool !
@sampsonrover
5 жыл бұрын
wish we were neighbors. we'd get all my stuff fixed.
@itchyoldfart
5 жыл бұрын
You know it!!
@frankrodriguez7468
4 жыл бұрын
🚜🚜🚜 👍👍👍 Great tool....great demonstration.
@itchyoldfart
4 жыл бұрын
Thank you brother
@johnferguson4857
3 жыл бұрын
would you take a defender tyre off 205 16" just to convince me to make this ,its one of the best i have ever seen .HAPPY NEW YEAR.From great britain
@itchyoldfart
3 жыл бұрын
I certainly would if I had a defender tire and rim hanging around here... thank you brother And happy New Year to you
@921aa
4 жыл бұрын
Neat tool. Here is the head scratcher. If the bead is an air tight seal how does the lube soak in?
@itchyoldfart
4 жыл бұрын
You got me.... There I go ...rambling again... lol
@921aa
4 жыл бұрын
@@itchyoldfart I've been know to do that too from time to time.
@benzmansl65amg
5 жыл бұрын
Awesome tool. Great content.
@jamesblackwell5141
4 жыл бұрын
Really nice tool, I could have used one of those when I was putting tires on my f150 just a few days ago. Ill have to make one of those now. :)
@itchyoldfart
4 жыл бұрын
Thank you brother ...it sure comes in handy when you need it
@hukamsinghrawat4424
11 ай бұрын
good ❤❤❤❤
@waynemizer4912
2 жыл бұрын
Try it on a rusted rim and old tire.
@user-wp8wr6yu2c
11 ай бұрын
Так вот он какой, настоящий американец))
@benbrewer5853
4 жыл бұрын
Nothing like a good tire iron
@danielvakaafi8199
2 жыл бұрын
Clever
@waseemahmad2164
4 жыл бұрын
Good. I will get made one for me from Welding shop. I think. It would be great helpful for me on my shop.
@benbrewer5853
4 жыл бұрын
I like that idea maybe I can try to make me want it I'm going to do something then I'm not as young as I used to be
@itchyoldfart
4 жыл бұрын
Oh so you're becoming an old fart... work smarter not harder.. lol...
@woodsmith8136
5 жыл бұрын
I agree - awesome tool. Could you use an impact wrench on that, or is that overkill?
@itchyoldfart
5 жыл бұрын
Thank you...Yes I thought about an impact Socket... it would have to be a homemade socket, about 4" deep ...lol
@endall6783
4 жыл бұрын
@@itchyoldfart I'm not sure could you weld a tube on the nut then weld another nut on that to make it longer. The nut could be bigger to slip over the threads instead of doing a socket what you think?
@zachharper216
4 жыл бұрын
Interesting. It looked like the mixture did most of the work to break the bead.
@dinhchieunguyen684
2 жыл бұрын
this confused me, before you started the thread where you put the wrench on the top looked short but after you done it looked a lot longer.
@iz1885
4 жыл бұрын
you are the man
@Charlie_Foxtrot_
2 жыл бұрын
You need to work for NASA..
@ivanguenelcalisto9734
3 жыл бұрын
Excelente !!!
@chrisradla
4 жыл бұрын
genius
@itchyoldfart
4 жыл бұрын
Thank you
@ruddymcfudgkins5991
2 жыл бұрын
but we love it :)
@indridcold8433
4 жыл бұрын
As of 13 August 2020, 33 tyre shop owners hated this video and gave a thumbs down.
@itchyoldfart
4 жыл бұрын
Haha...lol
@hubertrobinson8825
4 жыл бұрын
Real smart
@TomDawson-dd2wb
Жыл бұрын
Impressive! What did you make the pivot block from?
@itchyoldfart
Жыл бұрын
I believe 1.5 square stock
@babadada8610
3 жыл бұрын
Very smar
@donutplanetstudio8866
5 жыл бұрын
AMAZING ONE🍻
@tonygoulding9086
3 жыл бұрын
What is the thickness of the steel on the bead breaker
Пікірлер: 63