I build a tubing bender using an Affordable Bender die set ($150), pillow block bearings ($30) and 16ft of 1-1/2 inch .120 wall tubing, about 4ft of 1 inch .120 wall tubing, and a 8x8 1/4 inch plate ($75) and an air-powered 12-ton hydraulic jack ($75) some nuts and bolts and paint ($20) .
Total cost about $350
Using just a hand drill and angle grinder, and mig welder.
It took about 6 hours or so to make it. It is heavy, probably add some wheels to the bottom so it can roll around easily.
Негізгі бет Автокөліктер мен көлік құралдары DIY Tubing Bender made from Tubing
Пікірлер: 33