Nice rebuild and thorough detail in explanation and camera angle
@Buckwsr
Жыл бұрын
Thank you so much!
@johnball5616
Жыл бұрын
Good video. Helped me out. Thanks. Especially on brake pulley's
@Buckwsr
Жыл бұрын
Thanks, John.
@philliphall5198
Жыл бұрын
The rebuild kits are good and you keep the old parts for just in case I need them later I usually never remove the spindles, just new brging and drilling tap and zerts I clean and paint deck and paint bottom with used motor oil
@christianparkour8880
Жыл бұрын
Amen its good to hear people proclaiming Jesus
@TheFlyswat
5 ай бұрын
Hey great video, much appreciated by us DIY’ers!
@MrTrigger106
3 ай бұрын
Thank you for this. Its exactly what i needed to fix mine. I ordered brake pads online (forgot from who) and they sent me two for the right side. One tall and one short. The other 4:56 parts i got confused me because they sent two springs for the left and two of the other kind for the right. Your video enlightened me.
@eddiecheryl5567
Жыл бұрын
Good job would have like to seen how to put the deck on and off but I'm most happy about you mentioning my savior, Jesus!😊
@Buckwsr
Жыл бұрын
Wow. I don't remember mentioning the Lord Jesus. I will have to go back and watch the video. Thanks.
@philliphall5198
Жыл бұрын
Amen 🙏
@bitchut3218
2 жыл бұрын
You did a Excellent job with this
@Buckwsr
2 жыл бұрын
Thank you. I just came in from mowing with this machine. Works great.
@JuNe_617
4 ай бұрын
Thanks for this one.. great video!
@MrTrigger106
3 ай бұрын
When i ordered parts from Sears Direct, i used the parts list from the manual. I ordered spindles, washers, nuts, and the bolts. I think Sears could have told me the spindle they have already includes nuts bolts and washers.
@TheRetiredtech
2 жыл бұрын
Anti seize on the bolts I find better than lube
@philliphall5198
Жыл бұрын
For sure you can save the spindle and replace brging later for 12 bucks or less Antizee or never zee is just smart thing to do DIY guys never use it because there not full time mechanic
@mattcasdorph
24 күн бұрын
I have a LT2000 I got from a neighbor that had a another That he bought for parts. He actually gave it to me when My Troybilt died. Im assuming the craftsmans he had were close enough where he swapped the deck and then gave the mower to me. I started having problems with the deck and got a rebuild kit. I watched another video and according to the video had the idler and tensioner pulleys reversed an also found my belt keepers needed worked on on the pulleys. Is there a specific torque for those nuts on the tensioner and idler pulleys? I can't find any torque recommendations for the deck other than for the blades.
@roberteaton8687
2 ай бұрын
Can you list the part numbers for this mower I have the exact same one. The link doesn’t match up to the 4 bolt spindle.
@bertrandartigues655
4 ай бұрын
Really nice video! Did you get a different brake pad? I had the same problem, the one I got was too long! Thank you
@chuckhansen1521
9 ай бұрын
Caution, your link to the rebuild kit comes up with a 3 post spindle. Like you said, make sure you're ordering the correct parts!
@alexw7091
Жыл бұрын
I may have missed it but I did not see you re-attach the clutch cable to engage the the blade. I have my belt rubbing on the brake pad edge by the idler pulley On Brake pad I have same issue of the one pad being at what I think is the wrong angle as you show in
@FernandoHernandez-jb8ti
2 жыл бұрын
I rebuild my lawn mower it's like that now I got a new desk cut🙃🙂🙃👈
@robertschumacher472
13 күн бұрын
I'm a little disappointed, you show 4 bolt spindles what have a link to Amazon for 3-bolt spindles and tell us that you bought it off of eBay?? I don't understand how you could not have this detail be correct
@barbaragasawski6516
11 ай бұрын
Where did you buy parts
@Buckwsr
11 ай бұрын
I think I bought the deck rebuild kit with all the necessary parts on ebay, if I remember correctly.
Пікірлер: 26