SLS Zigbee gateway is a free (yet) developing project of a universal stand-alone gateway for building a Zigbee network of a smart home.
slsys.github.io/Gateway/READM...
github.com/egony
This is what you will need to build the gateway at minimum salaries:
cutt.ly/CWepNej - ESP32
cutt.ly/yWep0An - EBYTE cc2652p
cutt.ly/XWep7XW - USB UART
And these are the devices that work with it:
cutt.ly/MRC7xRz - smart curtain Zemismart
cutt.ly/8Trw52Q - Aqara E1 light switch
cutt.ly/nmRZOd7 - dimmer light Tuya
cutt.ly/xc2sjHA - light switch without zero line Tuya
cutt.ly/Rmgo5be - SonOFF shop
cutt.ly/7WeaUji - temperature and humidity sensor
cutt.ly/GWeaGIW - relay 16A Tuya
00:00 - why Zigbee and not WiFI?
02:25 - a little about the SLS gateway
04:10 - modification of the SLS board for cc2562p
06:00 - where can I get the firmware?
08:10 - flashing ESP32
08:55 - connection and firmware cc2652p
10:48 am - first enable SLS Zigbee gateway
13:20 - connecting Zigbee devices
16:50 - integration with Home Assistant
21:22 - automation in Home Assistant
21:53 - Straight Binding
23:30 - SimpleBind
24:51 - lua scripts
26:05 - results and budget
Негізгі бет DIY universal stand-alone SLS Zigbee gateway on minimums and on cc2652p. Budget $10
Пікірлер: 163