This project used an old moonshine still from the local classifieds. It hurt a little to cut up a functional still but it fit perfectly with the themed bar. I added a push button valve for a quick rinse via a copper loop with holes in the cap. There was a drain on the side of the still that I added a second rinse valve to. The still had to be trimmed in certain spots and adjusted down to make it fit in the available space behind the cantina. The customer had added the appropriate plumbing before pouring the concrete. I ended up adding a smaller DIY condenser coil to the thumper keg instead of using the large worm that came with the kit. I sweated on some copper plumbers tape tabs on the bottom of the still and thumper to attach it down to the wood top. I built an old pallet wood crate to set it on and the customer supplied the growler jar. All in all This DIY urinal turned out really great, the customer was very happy. I apologize for not showing the thumper and condenser being assembled due to the camera break.
Button flush valve: amzn.to/36ciSUq
Негізгі бет Тәжірибелік нұсқаулар және стиль DIY Urinal | whiskey still
Пікірлер: 15