Thank you for this design. My gym looks fresh and new and space and storage has been maximized.
@Thekettlebelldude
Жыл бұрын
I’m very glad it helped 🙏🏼
@PjSuso
2 жыл бұрын
Ayye! Thanks so much Brotha! Super helpful!
@Thekettlebelldude
2 жыл бұрын
You are very welcome 🙏🏼!!
@commandoslayer
2 жыл бұрын
You did an amazing job. It looks very sturdy.
@Thekettlebelldude
2 жыл бұрын
Thanks, it has held up to lots of use.
@richholland3160
2 жыл бұрын
Awesome..thanks for the tip...just what I need
@Thekettlebelldude
2 жыл бұрын
I’m glad it helped you. Thanks!
@foolishcrime
2 жыл бұрын
Great video. I plan to build according to your specs next weekend. Quick question- For the uprights, at what lengths on the 32” did you mark for the horizontal 9” and 16” pieces? Thx!
@tomnguyen4732
2 жыл бұрын
Very nice and details video. Thank you so much for your tips.
@Thekettlebelldude
2 жыл бұрын
Yes of course :) my pleasure
@costabasil
3 жыл бұрын
Hi - could you please post the dimensions of the rack that you built and complete list of parts that you used? I've got: height=32", depth=16", I am not sure about the length. Thanks - it is very nice, solid. Also what coating for the wood would you recommend if want I leave my kettlebells outside on the deck (covered)?
@jamesmozzy
3 жыл бұрын
What about adding wheels ? I want to do something like that to Store under my stairs. And want to pull it out when I need to take off the weights and then put them back as it’s a small space
@Thekettlebelldude
3 жыл бұрын
Yes definitely get some caster wheels with plates at the top and screw holes.
@teamsandu
2 жыл бұрын
Plane and simple! Exactly what you need and cheap also ! Thank you
@Thekettlebelldude
2 жыл бұрын
Yesss! I wasn’t willing to pay half a grand for storage in my garage. And it’s very sturdy. I plan on making a new set and make them a bit more refined.
@teamsandu
2 жыл бұрын
@@Thekettlebelldude I plan on replicating your project for all my kettlebells. I have to make them longer, so I must take in the consideration a stronger base.
@Thekettlebelldude
2 жыл бұрын
@@teamsandu If I may recommend, try building multiple 4 foot sections.
@teamsandu
2 жыл бұрын
@@Thekettlebelldude I took that in consideration also ;)
@TuskerStrong
2 жыл бұрын
Great work Kettlebell Dude. Curious what the total load is on the kettlebell rack you made. Poised to build one that will hold my 106# and heavier (future purchases ;) ). Thanks for sharing. Love what you got going here.
@Thekettlebelldude
Жыл бұрын
Surprising this rack will hold a ton of weight. I gave away my old one to the movers. And am going to make another. It hold well over 400lbs
@jamesmozzy
3 жыл бұрын
Have you found wheels that can take the weight. I want to stick it under my stairs and pull it out when I need to get the weights
@Thekettlebelldude
3 жыл бұрын
I found some at Menards for around $16 each that are rated for 600lbs. That could easily work. “Shepherd Hardware 4" Polyurethane Swivel Caster Wheel”
@willlopez7875
3 жыл бұрын
Hello. What bars did you use on the storage rack with bumper plates?
@Thekettlebelldude
3 жыл бұрын
Hi will. I used the crossbar from my Rogue Fitness rig. My garage was way to small to fit all 4 crossbars so I had one left over.
@tomasspallina6438
Жыл бұрын
hi! the dimensions are in inches or feet
@Thekettlebelldude
Жыл бұрын
I think it was in inches. It has been almost 2 years since I made my wooden weight storage. I hope this helps.
Пікірлер: 27