"A basic setup that works is better than one that's so complex that I never get around to building it" that really hit home for me 😅
@TFossett
3 жыл бұрын
Red Green gave me so many life lessons too!
@TimWelds
3 жыл бұрын
So many life lessons. Definitely a core part of my education.
@BoredOver30
3 жыл бұрын
“So remember...If the women don’t find you handsome... at least they’ll find you handy”
@claytronc6820
3 жыл бұрын
Nobody has ever been able to say I'm not handy and I still keep gorilla tape in my vehicle and backpack for an emergency.
@erikandersen4811
3 жыл бұрын
I primarily do flux based welding and the fumes are pretty gnarly. I was looking at different fume extractors, and the price tag has postponed that upgrade. This basic little setup will help a lot with air quality in my shop. Thank you for making this video!
@TimWelds
3 жыл бұрын
Thanks! I've been putting it off for a long time too, and I saw this blower on sale and thought that it might be a nice, simple option.
@erikandersen4811
3 жыл бұрын
@@TimWelds you’re welcome man! 🙂
@grassabrutta
2 жыл бұрын
@@TimWelds Do you think that galvanized sheetmetal reducers would be ok (I cannot for the life of me find any aluminum reducers) ? I'm figuring that if the puddle is a good 8-10 feet away from the reductor placed onto the blower, that there should not be an noxious fumes created (I am guessing that the fumes would not be sufficiently hot to have such an effect by the time they have traveled to the glower unit) .... what do you (and others) think ?
@77Avadon77
Жыл бұрын
The price tag has prolly postponed most of us
@77Avadon77
Жыл бұрын
@@grassabrutta I think your fine
@stephk5255
Ай бұрын
The best things are simple, effective, and things you will actually use. Great job, Tim!
@rich3633
3 жыл бұрын
Guarantee you now use this exact set up for 10 years with no adjustments and no brackets. Bravo 👍.
@ShortCrypticTales
3 жыл бұрын
hey if it works and not broke don't fix it
@rich3633
3 жыл бұрын
@@ShortCrypticTales my point exactly 👍
@77Avadon77
Жыл бұрын
Lolol
@hazael_d
Жыл бұрын
He now has a Fume Dog
@russnurse2b807
3 жыл бұрын
Great job! I've been in healthcare for 30+ years and occasionally weld. I wish everyone that welded had a set up like this. It's much better than what I have. I'll be copying this now. Cool reference, I Loved the Red Green show. I definitely think you made ol' Red proud with this one. And remember, keep your stick on the ice, cause he'll be pulling for ya.
@Environmenthrall
3 жыл бұрын
Finally, just the video I was looking for. As someone who wants to begin welding, the potential health effects were concerning. I hadn't found any budget-/DIY-friendly options. Thanks for this.
@Snyperx77
Жыл бұрын
Hopefully this helps some folks. I picked up a 8" to 6" duct reducer with some 6" x 8' semi-rigid aluminum ducting. The 8" to 6" reducer did NOT come crimped so the 6" x 8' round ducting wouldn't fit. Soooo I bought a pair of 5-blade ducting/HVAC pliers to add the crimp and it fits like a glove now.
@JMRSplatt
7 ай бұрын
Ah, yes! I was looking for your comment, am about to build this tomorrow! Thank you!
@Marine-72
Жыл бұрын
I have been welding for some time and still learn some tricks to the trade from you. I am glad you covered this subject because welding fumes are very carcinogenic! I believe anyone that welds needs to make a concerted effort to exhaust those toxic fumes. Welding is fun, let's make it safe!
@Hey_Its_That_Guy
3 жыл бұрын
Tim, this a terrific idea, thank you!! I've been thinking about how to do just this. Genius!!
@TimWelds
3 жыл бұрын
Glad it was helpful!
@Shayleyle
Жыл бұрын
Red Green would be extremely proud. Great idea for a build-going to have to make one of these versus a fan blowing air across my area.
@lincfranse4968
3 жыл бұрын
Im a beginning welder like super new and i was concerned about the fumes too, im going to copy this thank you.
@TimWelds
3 жыл бұрын
I used it again today, and it really did help quite a bit.
@bryant9774
3 жыл бұрын
I'm literally going to build this today. thanks for all your videos I learn a lot from them.
@RickRose
Жыл бұрын
That's way cool. I've been looking at 4-inch inline duct fans at like 150 CFPM; had no idea HF offered this monster. I think I'm changing my plan. Thanks for sharing!
@CraigHollabaugh
3 жыл бұрын
Nice and simple. Think about using magnets for the hose fan attachment.
@TimWelds
3 жыл бұрын
Great idea! That would be a perfect way to position it, especially when I'm working on a larger frame that doesn't fit on the bench.
@landscapingspecialist
3 жыл бұрын
I was gonna attempt to build this exact same setup for my garage. Glad to see it works well! Appreciate the content
@TimWelds
3 жыл бұрын
Awesome! It's simple, but works well.
@michaljenicek2884
3 жыл бұрын
Awesome confirmation of an idea I already realized in my garage. This really works. I have air pipes on the ceiling as well as the ventilator. Cheap and working solution.
@TimWelds
3 жыл бұрын
Thanks! I'm thinking that I may add some permeant ductwork now that I've seen the concept work.
@roydavis7975
2 жыл бұрын
Thanks Tim. I built this and it works great. Put mine on a stand up 2 wheel cart for storage and mobility. Can use vertically or horizontally. Great idea. Glad I found your channel. Don't know how to add a picture but easy to imagine
@TimWelds
2 жыл бұрын
Great idea!
@zapa1pnt
Жыл бұрын
Hi, Tim. You may find it helpful, to get another adapter (like you put on the blower) and put it on the collection end of the tube. That way, it should pull air from a wider area, but still be somewhat directional, in it's collection. This is, pretty much, what you see in other welding shops.. You may also want to find or create an articulating arm arrangement, to hold it where you need it.
@jcohen661
2 жыл бұрын
I liied this so much that I went out and bought the stuff and buikt it today. Works great! HD only had an 8->6 reducer so I had to do the rest with duct tape. On the output side, I used a jumbo ziplock bag and duct tape so it fills out when I turn it on. Wish I could post a pic.
@GiovanniGiorgo
2 жыл бұрын
What’s the purpose of the ziploc?
@issachunt3159
3 жыл бұрын
I'm in the process of building a workshop; it's currently a big sealed box (no windows, one door), so I'm looking at fitting a big fan through the wall opposite the door; I like the idea of the ducting to aim the ventilation when I need to.
@TimWelds
3 жыл бұрын
Very cool! One day, I would like to duct the blower in permanently with a vent outside. Good luck with the shop!
@KR-jq6ru
2 жыл бұрын
Tim, thank you for this simple build, even my simple mind can handle this.
@mikepierson3097
3 жыл бұрын
Great idea! I’m going to do the same thing, thank you!
@TimWelds
3 жыл бұрын
Thanks! I'm pretty happy with how it works.
@leokelly359
3 жыл бұрын
I did the same thing in my barn/ shop except I used an inline 6 inch blower going out a 6" dryer duct works great when I'm stick or mig/ flux core welding
@TimWelds
3 жыл бұрын
I may have to add the dryer duct down the road, that would make things way more convenient. Thanks for the tip!
@craigsnowden
3 жыл бұрын
I met Red Green at the post office once. He was on his phone in line behind me and I immediately recognized the voice. Waited outside to shake his hand when he was leaving. Super nice guy!
@TimWelds
3 жыл бұрын
That's awesome! I would love to meet that guy, I still watch the old episodes from time to time.
@craigsnowden
3 жыл бұрын
@@TimWelds he was doing a stand up comedy tour pre-covid. Mostly Canadian dates tho...
@jwdickinson643
3 жыл бұрын
love the “basic-ness”! gives me some good ideas for my set up. Thanks! Great video!
@miszced
3 жыл бұрын
This is how it should be. Reasonably economical and effective.
@TimWelds
3 жыл бұрын
Thanks! No reason to overcomplicate some things.
@E4S65
8 ай бұрын
Nice reference, Love red green! Excellent use of the handyman’s secret weapon.
@helmesnick79
3 жыл бұрын
Simple yet so affective. Thank you for the brilliant idea. Now to go shopping 🤪
@mgc1970
3 жыл бұрын
FANTASTIC IDEA!!!!....Now I know what this weekend's project will be!! Keep putting out your great content!👍🏻🥃
@melgross
3 жыл бұрын
This is great. I did one too. The only problem I found is that putting the tube outside an open door usually means that half the time a breeze blows it right back in. I had to remove a pane of glass from a window in the garage, where I do my welding, and make a polycarbonate pane with a hole in it, and placing the tube in that. When I’m not using it I replace the pane with another one that fills the opening. The blower I was able to find nas two speeds.
@TimWelds
3 жыл бұрын
Thanks! That’s a great idea. I’m already thinking that I might do a more permanent installation with a hole in the wall.
@cenccenc946
3 жыл бұрын
I was installing a duct for my wife's dryer a while back. as I was putting the duct tape on, I realized that was the first time in my life I had ever used duct tape on duct. I must have used kilometers of the stuff in my life for absolutely everything else. From something like closing bags to stopping leaks in a canoe a hundred km from civilization.
@TimWelds
3 жыл бұрын
That's funny! I use the stuff all the time, but rarely on any duct work.
@joshuasiglukqaunaq8686
3 ай бұрын
Oh my goodness all these years of red green show 😅 great humour
@AkPacerPilot
3 жыл бұрын
So awesome, one thing that’s bothered me in my shop, totally already got everything needed to build one... doin it!
@TimWelds
3 жыл бұрын
Go for it!
@MrZabbitz
11 ай бұрын
Loved the Red Green reference, and thank you for this video.
@Thewatson77
3 жыл бұрын
This is exactly what I did 👌🏼 it works perfectly
@TimWelds
3 жыл бұрын
Very Cool!
@kuntakentay6969
Жыл бұрын
its so funny ive had a inline fan and the tubing for plants i use to grow indoors and for years never thought to use it for this purpose in my garage until today lol then i looked online to see if others did the same and i find this video. Its so funny how simple and effective this is
@edgarhasbun5950
3 жыл бұрын
I live in Honduras and here there is no safety regulations what so ever and that Idea looks great I tried something like that but whit a fan 26 x 26" and nothing else it was actually blowing at me and not really sucking the fumes from the weld. it did go that good at all love the idea
@garygogo9048
3 жыл бұрын
Awesome, I was wanting to build something like this, just have a small desk fan right now, this would be way better!
@TimWelds
3 жыл бұрын
Thanks! I'm pretty happy with how it works.
@garygogo9048
3 жыл бұрын
@@TimWelds Thank you for always sharing with us bro!
@garygogo9048
3 жыл бұрын
@@TimWelds also dont worry about the tape so much, your actually using "Duct tape" for it's intended purpose ha ha.
@ricardomontes373
3 жыл бұрын
You got it man, it works! Thanks for sharing.
@TimWelds
3 жыл бұрын
Thanks!
@CoderMan
Жыл бұрын
You get a like just for mentioning Red/Green! I loved watching that with my dad, lost him this year...
@bryanreyes3084
3 жыл бұрын
I just us a square fan xD it works. Especially when I'm under a truck I lay it on the engine bay and it definitely sucks the smoke out very well, but I'm gunna make one of these also, thanks for the video 👍🏼
@TimWelds
3 жыл бұрын
That's a great idea! I should probably get one of those too, since I'm often not at a bench.
@melissarussum389
2 жыл бұрын
Red Green show was the best! Thanks for sharing.
@SeaWasp
2 жыл бұрын
On behalf of Canada, thanks for the Red Green shoutout! Prior to it, I thought, "Whoa! Actually using duct tape for duct?" Keep yer stick on the ice! Also thanks for these diy home gamer setups. Much appreciated for when I start to learn to burn sticks 👍
@ronaldmoore2336
3 жыл бұрын
As always informative and helpful, but the one I made is very much similar to yours but to turn the fan output down I put a small rheostat on it that I got at the hardware store to slow the fan down and it works great. Thanks for another great video
@TimWelds
3 жыл бұрын
That's a great idea! it would be nice to be able to turn it down a bit. Thanks!
@ronaldmoore2336
3 жыл бұрын
Wow Tim that fast , I thought I'd give one of the things I've learned since I've learned so much from your Channel . Nothing like burning rod👍😉 @@TimWelds
@evildead1791
3 жыл бұрын
I was curious if something like this would work, great to see it in action, always dragged my welder outside and used a fan to blow accross my work piece, really paranoid about welding fumes, nasty stuff
@markashlock9017
3 жыл бұрын
Thanks Tim! Another good, well thought out vid. You make everything look so...”doable”, and I appreciate that more than you know. Looking forward to your next release : )
@binauralfortune
Жыл бұрын
I just needed a new inner tube for my beach cruiser bicycle. No need whatsoever for this fume extractor idea but it looks so friggin cool that I bought one. wish I knew what it was for. Oh well. Off to the park for a bike ride!
@dans9228
9 ай бұрын
Fantastic video, thank you. Found a ventilation fan with 33 feet of ducting on amazon. My shop will be soon be smoke free!
@davidmaxwell7275
2 жыл бұрын
Thanks Tim for a great idea, I have the welder birthday present haven’t turned it on yet the issue of fumes was floating around in my head but you have provided some kind of options for me to consider. So as soon as I can get in front of the other things getting in the way of me making a start on my welding journey I will have one less thing to consider. Thanks again
@stevenfrost163
2 жыл бұрын
Beauty of a video. That's similar to what I'm doing. I like the portability of your set up, you just gave me a great idea. 👍
@angeltorres9372
2 жыл бұрын
Simple and effective solution. Will give it a whirl. Thx for sharing .
@EripolJem
3 жыл бұрын
Can you please link some items in amazon that might give us the reference for these materials? Thank you.
@bds21
3 жыл бұрын
Love an American making a Red Green reference! Keep your stick on the ice Tim
@TimWelds
3 жыл бұрын
What a classic show!
@mikegiammarise7861
2 жыл бұрын
If they don’t find you handsome they should at least find you handy-red
@Dr.CandanEsin
3 жыл бұрын
I've missed this video. Appreciate your forwarding response to my question following video.
@SolitaryCanid
10 ай бұрын
You could mount it under the table and adjust where you're welding on the plate and draw fumes out and down. Sister had a vent at the same level as the stove and worked great.😆 Or maybe box in the underside of the table.🤷♂️
@peetky8645
3 жыл бұрын
tim, next consider making a hood ventilator with a hair dryer(no heat and low setting) and flexible tube.....combined with your extractor, you will be golden for life for under 100 bucks
@paul_schuette
3 жыл бұрын
Great idea! Thanks for sharing!
@JeffinTD
3 жыл бұрын
Great idea. I wonder if that fan could be set up for variable speed.
@TimWelds
3 жыл бұрын
It has 2 speeds as it is, but a speed controller would be a really nice addition! Thanks!
@sincitysanta
3 жыл бұрын
Really appreciate your tutelage and your video series. Do you have experience with PAPR systems?
@TimWelds
3 жыл бұрын
I've seen them and they seem like a great option, but I have never had one personally. Thanks for watching and for the comment!
@gibberish0002
2 жыл бұрын
Hey welcome to the shap! Love your videos man.
@petergarcia8225
3 жыл бұрын
What he is saying is no guarantee but it well help more than nothing...it is effective!
@shed.projects5150
Жыл бұрын
If you think that's fumy, try using flux core mig welding. Good vid .
@kaidakemes1260
10 ай бұрын
That made me wanna learn welding and it's affordable
@danielchambers1958
3 жыл бұрын
Good idea Tim...... thanks!
@kermitthefrog6363
2 жыл бұрын
Thanks for the videos Tim, once again it is appreciated!!
@arva1kes
2 жыл бұрын
For sencible people - it's around 2.8L/s so it will actually give you understanding that you are moving around 3 litres per second. Nobody can asses on amateur level the capacity if you stretch it over minutes or hours on things that are happening right under your nose. And it around 166L/m
@jsmith7348
Жыл бұрын
The distance from the fume source and fume hood is very important in fume extraction . The 2nd example is not really pulling fumes due to the distance . I think a lower cfm or suction pressure closer to the fumes would be better imo
@PeakyBlinder
3 жыл бұрын
I have 4 X 150mm pc fans on a board with Flexi tube connected and aimed outside via a fleece filter.
@TimWelds
3 жыл бұрын
Nice! I bet that pulls a ton of air!
@WoodchuckNorris.8o
5 ай бұрын
Love your channel. I just welded for the first time. Is it normal to get a wicked sore throat and almost a cold? I didn't weld for long but now I'll wear a respirator
@TimWelds
5 ай бұрын
Thanks! That can happen. Google “metal fume fever.”
@r.b.fraunhofer1655
3 жыл бұрын
Depending on what's beyond the door, you might consider a filter. Shop vac filter might work. Alternate approach I have used (when already in good ventilation) is allergy furnace filter taped to box fan.
@TimWelds
3 жыл бұрын
Great suggestion! I wanted to use a filter, but I worry about it catching on fire without a proper spark arrester and perhaps flame retardant. It's probably unlikely, but I have seen a couple industrial filter units go up in flames because they didn't have proper spark arresters.
@seanwright4192
Жыл бұрын
@TimWelds nice job! Simple and effective. Have you been watching the blower over time to see if the fumes are doing anything to it?
@Nettle314
10 ай бұрын
Nice one!
@machaf
3 жыл бұрын
Try the Harbor Freight dust collector with the hose kit they sell for it. Works better than that crappy thin metal dryer vent.
@TimWelds
3 жыл бұрын
I’ll have to check that out. Thanks!
@carlalm6100
Жыл бұрын
Great video. Have you considered using a fan with an activated charcoal filter in stead of venting the smoke outside?
@lozadazx14
2 жыл бұрын
Great idea !!! Thanks Tim
@JM-qy5yd
3 жыл бұрын
Excellent!👍
@TimWelds
3 жыл бұрын
Thank you! Cheers!
@WellsLarry
3 жыл бұрын
Good idea
@TimWelds
3 жыл бұрын
Thanks!
@billynorton6150
2 жыл бұрын
Is it increasing the fire 🔥 tho because with my ideal that's one of the most conserns ❤
@Failedmusician
2 жыл бұрын
I have a question. Once these particles are outside, do they just stay in the area forever or is there a half life? I want to replicate this system. I was just wondering if I am just moving dangerous particles from one area to another? Thank you for sharing your setup!
@colemine7008
3 жыл бұрын
this is excellent
@TimWelds
3 жыл бұрын
Thanks!
@eemc2cu745
2 жыл бұрын
You left out a link to the purchase of the budget friendly ducting, shown in the video.
@wpvisualbuilder5722
2 жыл бұрын
So I have a slightly different application. I have a curing machine which has two chimneys that vapor/fumes come out of. Can I put a splitter on this and have maybe two 3 inch vents siphoning fumes at the same time? What do you think? I'm also thinking about putting 8-inch vent on the backside and sticking that through the wall so it vents outside during the wintertime. What do you think?
@greathornedforge1133
2 жыл бұрын
"If the women don't find you handsome, they should at least find you handy." Red Green
@zapol1624
3 жыл бұрын
I say YES 👍
@xylemmelyx
2 жыл бұрын
I read somewhere that duct tape is extremely useful for almost anything except taping ducts.
@jontansgarage
2 жыл бұрын
I considered this when I saw this blower at harbor freight. How has it held up? Seems like it has mixed reviews.
@joshuasiglukqaunaq8686
3 ай бұрын
Love your shoo
@billynorton6150
2 жыл бұрын
Nic ideal I weld also....Hey!!!!!!!!!!! 😆🤣😂 I'm wanting to invent a smoke alarm that sucks smoke out of a house 🏠 I was thinking it could possibly be done to a sertin exstint but there a lot of safety issues needing help ....thanks
@evgeniikorolev5167
3 жыл бұрын
my lung are not for a cancer, my like for you, brah
@TimWelds
3 жыл бұрын
Thanks!
@KingBigBabyJesus
2 жыл бұрын
Brackets, tape!? Tig it all!
@DingusSquatfordJr.
Жыл бұрын
Neighbor wanna thank you so much
@nelsonglass3497
3 жыл бұрын
You can use air 10" for out flow
@TimWelds
3 жыл бұрын
That would be perfect for a larger area where the door isn't right there. Thanks!
@rdrgtreer
8 ай бұрын
But how do you permanently install this to the wall?
@claudyfocan731
3 жыл бұрын
27 cuft ~ 1CuM So this thing will pump roughly 59 cubic metres of air per minute. Thats almost 1CuM a second, not bad!
@77Avadon77
Жыл бұрын
Even tig on steel has started to make me sick after 21yrs of doing it. I start to dislike welding if the fumes start making me ill
@thenetwerx
3 жыл бұрын
Do you run it on high or low speed?
@Taadow46
Күн бұрын
👍🏾
@anthonyembleton6385
3 жыл бұрын
Hey Tim i do a trade test it is a butt weld overhead with a 1/16 steel plate a 1/4" gap with 7018 rod i used 75 to 80 amps an it haven't came that good i need some advice please ???
@mikemaiman3623
3 жыл бұрын
Anthony, Tim is not going to be able to weld that either. Are you sure about the material thickness?
@anthonyembleton6385
3 жыл бұрын
Yes i am very sure is a 1/16 plate it's very thin a 1/4 inch gap wide i didn't get to penetrate true it with the 7018 an i wasn't expecting that with a 7018 rod either it suppose to be a 3/8 steel plate test piece with 6010 an 7018.
@TimWelds
3 жыл бұрын
That sounds like a nightmare! I've never tried that one before. The 3/8 plate with 6010 root and 7018 cap sounds more doable, for sure.
Пікірлер: 162