Skateboards? Oh my goodness, my grandsons will love that!
@pineapplej7310
Ай бұрын
Couldn't have chosen a more boomer statement!
@michl3542
Жыл бұрын
Great tutorial and easy to follow. Wonderful editing
@sawdustwanderlust254
Жыл бұрын
Thank you! Cheers!
@davidholmes3776
3 жыл бұрын
Stunning work and great commentary. I’ve subscribed and hope to see more like this!
@sawdustwanderlust254
2 жыл бұрын
Thanks brotha!
@joaneleanohlsen6367
2 жыл бұрын
This is going to be my hubbys Christmas present!😁 Thx for the tutorial💖
@sawdustwanderlust254
2 жыл бұрын
No problem! Hope it turns out great!
@meccisback
2 жыл бұрын
How do you ONLY HAVE 1000 SUBS BRO YOUR EDITING YOUR Explanation IS INCREDIBLE THANKS YOU SOOO MUCH !!
@sawdustwanderlust254
2 жыл бұрын
hahahaha I feel that! Thank you so much, a lot of thought and effort!!
@michaeldreznin9680
5 жыл бұрын
Killin it brotha!
@sawdustwanderlust254
5 жыл бұрын
Thanks Drezzy!
@samantha7742
2 жыл бұрын
I would absolutely love to see the secret wood rings!
@sawdustwanderlust254
2 жыл бұрын
Check out the wood and resin video on my page!
@carolenewman2703
3 жыл бұрын
Subscribed cuz you helped me a lot thanks!!
@sawdustwanderlust254
Жыл бұрын
Awesome im so glad!
@johnsallotment993
4 жыл бұрын
Great videos! 👍
@davidcornell1166
3 жыл бұрын
Thank you!
@edwinawilliams9809
Жыл бұрын
Your rings are great 👍
@sawdustwanderlust254
Жыл бұрын
Thank you 😁
@gotem2609
4 жыл бұрын
I made my ring before watching
@KingnBanter
5 жыл бұрын
Great video. New Subscriber. More ring videos, please. .
@sawdustwanderlust254
5 жыл бұрын
Awesome I appreciate it! Ill get on it!
@sawdustwanderlust254
5 жыл бұрын
I dont know if you saw, but i made the resin and wood ring video!
@eternaljoker
4 жыл бұрын
I would love to hear about your finishing, bro. :)
@sawdustwanderlust254
2 жыл бұрын
I don't know where to start, but I know where to finish
@vickilawson3212
4 жыл бұрын
Never get around a drill press with gloves on! 🤦🏼♀️
@ZeKraken
4 жыл бұрын
Made me cringe!
@justafrenchkidtryingtospea9462
4 жыл бұрын
vicki lawson why? Can you explain please
@FreterP
4 жыл бұрын
Because fabric can get caught easily in rotating machinery and sucks your fingers and hands into said machinery, leaving you with some nasty wounds.
@davidcornell1166
3 жыл бұрын
That may be your experience with the drill press and good advice, but here it is necessary to avoid fingers getting too hot BEHIND the sheet of sandpaper. With that being said it is a bit wrapped with tape, it’s all good here
@KipdoesStuff
3 жыл бұрын
@@davidcornell1166 Wrong. Don't make an excuse for wearing gloves with a drill press or hand drill. If it gets hot, take a break.
@haiwnqan
3 жыл бұрын
bro thanks this was the easiest vid
@sawdustwanderlust254
Жыл бұрын
Thanks brother!
@azelms.chazjones8653
Жыл бұрын
I like that.
@sawdustwanderlust254
Жыл бұрын
Thank you!!
@hexagonaltv754
4 жыл бұрын
First timer here! Do I need to worry about going with or against the grain?
@davidcornell1166
3 жыл бұрын
I wouldn’t imagine it would make too much of a difference either way!
@Frosty3k
2 жыл бұрын
Cool, but...will it crack in time? Mine cracked after some nonth...maybe it was a lil tight...ok, but how are you supposed to cut the grain of the wood, to avoid cracking? Thanks mate
@sawdustwanderlust254
Жыл бұрын
It really depends on how thin the ring is, stabilizing it with some thin CA super glue should help. As far as the grain goes Im not sure what the right move is, some experimentation !
@rev4033
4 жыл бұрын
Could you please list the tools you've used ?
@davidcornell1166
3 жыл бұрын
There is several different ways to do it, they are all showed in the video, thanks for watching
@davidjesse8689
4 жыл бұрын
Can I put a gemstone in a wooden hardwood ring? How to do it that the gem is secure?
@davidcornell1166
3 жыл бұрын
I’m sure there’s a way to do it, however I haven’t so I wouldn’t give any advice on it
@maramowery541
Жыл бұрын
Lmao the ending ya should have put a ring on itn
@timothydelaney9675
Жыл бұрын
Is there a written or typed out instructions for this?
@bananaronnie4087
4 жыл бұрын
secret woooooood
@davidcornell1166
3 жыл бұрын
I’ve got another video showing how to do that!
@davidshepherd2094
3 жыл бұрын
Hi, what is the wood that you are using in this video?
@sawdustwanderlust254
Жыл бұрын
The one Im using the most is Red heart
@coryjohnson3057
3 жыл бұрын
How do you get the multi color layer look?
@jonathangodinez6340
2 жыл бұрын
he used a skateboard piece to make that
@In_time
10 ай бұрын
You can glue different colored pieces together, wait till it’s dry and work with it as if it were one piece of wood.
@rylanhgdghhgv7689
3 жыл бұрын
Dang you got your fingers close to the blade… well I’m gonna go do the same!
@andreeeeeeeee670
3 жыл бұрын
how much was the materials in total ? thx for thizz
@davidcornell1166
3 жыл бұрын
It depends completely on what type of wood you go with. You can get small blanks for wood hobby’s like pen turning on the cheap side under 5 bucks to make at least a handful of rings
@dutchmary1991
3 жыл бұрын
What did you spray?
@sawdustwanderlust254
Жыл бұрын
polycrylic
@davidtuttle5357
5 ай бұрын
How about an inlay video ? 😮
@rylergilll
3 жыл бұрын
can i make a ring JUST with a handheld file?
@Ella4132
3 жыл бұрын
I made one like 8 years ago at camp with only two files (flat and circular), sandpaper and a saw. made it from a stick, probably poplar. I've been trying to make a new ring since the one I made cracked in two because I didn't finish it or anything. if you don't have sandpaper you could probably try a nail file, or the metal file on nail clippers
@sawdustwanderlust254
Жыл бұрын
I would have to file that as the hardest way to get it done but possibly!
Пікірлер: 76