Glad you got it fixed. Great to know a way to fix it! I had something similar happen to me with my MA2 when I first got it. I landed with the gimbal hanging over my landing pad into the grass and on the next flight the gimbal got stuck and gave a warning. For me, it worked itself out after a minute. I believe some debris got into the gimbal from that less than stellar landing. Since then, I always hand-launch and hand-land to avoid any dirt, dust, or other debris from getting into the gimbal. That has worked out for me and I haven't had an issue since.
@AboveandBeyondFilms
2 жыл бұрын
I’m definitely using my landing pad a lot more now 👍
@AboveandBeyondFilms
2 жыл бұрын
I've been using a launch pad for takeoff and landing ever since but it's kinda annoying having to bring it with me. I guess it's time to learn how to hand catch/take off.... thanks for watching my new channel!
@johnstetak4306
2 жыл бұрын
A friend of mine started getting the same error as you. My drone is a year old and DJI says I've flown it over 1,500 minutes. I started to notice dust/dirt was beginning to collect in the area around the gimble and in the cooling vents. I used a little simple green and q-tips to clean out the gimble area and now routinely use my air compressor to blow air through the vents. The first time I did this I was surprised to see how much dust a dirt flew out of the drone via the gimble compartment. Using a mild stream of air doesn't seem to have hurt anything. Hopefully, my preventative maintenance will end okay.
@AboveandBeyondFilms
2 жыл бұрын
I’ve heard a lot of people saying not to use compressed air on them. Could possibly damage it.
@DrMuppy
2 жыл бұрын
Thank you for this simple, but probably more common than realized, solution to a little temporary problem that can be mistaken for a more major failure.
@AboveandBeyondFilms
2 жыл бұрын
Just doing my part to help out 👍
@m118lr
Жыл бұрын
Yep. I’m bout to REALLY look at it right now..just wanted to check the ‘tubes first. I had noticed it on a ‘twilight” flight last night..a screen warning that didn’t affect any flying mode whatsoever. Tbh, as soon as I became aware, I just RTH’d it and landed. Thanks brother..
@AboveandBeyondFilms
Жыл бұрын
Glad I could possibly help 👍
@flywrightdrones
2 жыл бұрын
Glad you got it working again, love your videos and music 👍
@AboveandBeyondFilms
2 жыл бұрын
Thanks. I’m hyped it was such a easy fix
@Seluilaendrone
Жыл бұрын
Thanks! I will take a look at my phantom 4 ,which have some gimbal issue ! Helpfuul tutorial Thanks again
@AboveandBeyondFilms
Жыл бұрын
Glad it was helpful!
@itwasthelight
2 жыл бұрын
Thanks for sharing this easy solution 🔥
@AboveandBeyondFilms
2 жыл бұрын
Glad I could help 🤝
@westcoastphotos.ireland3038
2 жыл бұрын
Thanks for the advice , glad it wasn’t to serious 🤞
@AboveandBeyondFilms
2 жыл бұрын
Thanks. Very happy it was such a easy fix
@kaeligh
2 жыл бұрын
I was having Gimbal Motor Overloaded error. I tried to manually move the camera, as suggested in the video. That's when I found the packing foam on the back side which I was not aware was not part of the drone (first time flier). Silly me.
@AboveandBeyondFilms
2 жыл бұрын
😂 👍
@Kayotified
2 жыл бұрын
Hey bud , just discovering your vids tonight as I get into my KZitem debut with my new Air2s , great content ! I see you've just started uploading this year as well so I'm inspired 👍🏽 I've been babying my drone since I've gotten it so typically launch from a launch pad , but if i were to encounter this error ever.... would you recommend that canned air to blow out any dust or debris as an alternative? #Subscribed btw 💯🚁
@AboveandBeyondFilms
2 жыл бұрын
I’ve heard not to use canned air on drones. I would try to wiggle the like I did in the video.
@eprohoda
2 жыл бұрын
I love it !!
@AboveandBeyondFilms
2 жыл бұрын
Thanks 🙏
@LucasBuchegger
2 жыл бұрын
thumbs up really good video.
@AboveandBeyondFilms
2 жыл бұрын
Thanks 🙏
@victorhurtarte7563
Жыл бұрын
Thanks! also works in the Mavic Air2!!
@AboveandBeyondFilms
Жыл бұрын
🤘🤘
@jamesgreen2494
2 жыл бұрын
Thanks for sharing, very helpful. May I ask what screen-sharing app you are using?
@AboveandBeyondFilms
2 жыл бұрын
I use Screen Recorder for IPhone. Thanks for watching!
@timtoni123
Жыл бұрын
Thank you for your help
@AboveandBeyondFilms
Жыл бұрын
Thank you for watching. Glad my video helped 👍
@BadDogMax
2 жыл бұрын
Thanks for the Tip👍
@AboveandBeyondFilms
2 жыл бұрын
Thanks for watching another video!
@salmanqadri4984
2 жыл бұрын
Hello can you share what location u were in San Francisco when you shot this i just got my drone but i dont find places to fly
@AboveandBeyondFilms
2 жыл бұрын
I use the Aloft app for iPhone. Thanks for watching
@Olivia07262007
2 жыл бұрын
Goodevening (Above and Beyond) I had the same issue with my drone, mine had been experiencing issue's with Gimble motor overloaded error. I noticed before I saw the error show up, I noticed the gimble was slightly looking down and I was merging the camera upwards and saw the jumpy video as I tried to look forwards. Any idea?
@AboveandBeyondFilms
2 жыл бұрын
Try using your hand to move the camera on the three different axis when it’s powered off. I could tell something was inside and it eventually worked it’s way out. You can also calibrate it and see if that helps.
@BinaGapuraDesaPerina
Жыл бұрын
Its help me verry much
@AboveandBeyondFilms
Жыл бұрын
🙏
@Grill.N.Chillz
2 жыл бұрын
I just crashed my dji air2s and feel like crap about it. The props were damaged but I easily replaced those, but the thing I’m worried about is the gimbal. Since the crash i noticed a slight tilt on the gimbal. Although I try to recalibrate it automatically, it doesn’t seem to fix the issue, only when I manually do it. Do u have any suggestions on how to fix this? Also sometimes I hear some noise from the gimbal, like a motor or something.
@AboveandBeyondFilms
2 жыл бұрын
If the gimble is now making a strange noise it probably will need to be repaired. Sorry to hear about your crash 💥
@Grill.N.Chillz
2 жыл бұрын
@@AboveandBeyondFilms hey good morning. Yeah I messed around with it, moving it left to right up and down. Turning it on and off (including take offs/landing) and it seems the noise went away. I’m in the San Diego area , I noticed you made a couple of videos down here. do u know any spots in SD that I could possibly take it over to look at?
@Olivia07262007
2 жыл бұрын
Do you notice the tilt, when the drone is powered on
@hieuduong8813
2 жыл бұрын
Where can I buy signal lights like you? Tks you.!
@AboveandBeyondFilms
2 жыл бұрын
lumecube.com/products/strobe
@furuleviFPV
2 жыл бұрын
Motor bearings (propeller, gimbal) and dust should not be mixed.
@AboveandBeyondFilms
2 жыл бұрын
💯
@justgrayyy105
2 жыл бұрын
Similar thing is happening to my AIR 2 and it’s really frustrating
Пікірлер: 51