您們常一起的空拍夥伴是誰?
我的空拍夥伴是哈妹😝😝😝
--
DJI Care超過48小時 拍攝方式 mini 範例
--
DJI Care Video Verification Tutorial (Inspire 1 V2.0 example)
Welcome to this DJI tutorial video for DJI Care video verification.
To get protect your aerial system with DJI Care, follow these steps.
DJI Care video verification requirements:
1. Show aircraft, remote controller and DJI Go app in the same shot.
2. Shoot your video in a bright and open outdoor area.
3. Ensure video is clear and in focus. DO NOT edit your video.
In the verification video, please shoot the following items in order
4.S/N numbers of your aircraft and gimbal, making sure that both numbers are clearly
visible(For Phantom 4, only the aircraft SN is required)
5.Turn on the remote controller and the battery
6.Enter DJI GO app and calibrate the compass outdoors (open area recommended)
7.Format SD card using the DJI GO app. Make sure it is backed up before formatting.
8.Check the IMU.
9.Demonstrate gimbal pitch movement and rotation by moving it up, down, left and right. If
using a Phantom 4 or Phantom 3 series product, simply tilt up and down.
10.Use the Combination Stick Command to power on the motors.
11. Hovertheaircraftinaplaceatanaltitudeofaround1.2mandadistanceof6mandtransform
the Inspire. Skip this step if using a Phantom 4 or Phantom 3 series product.
12. Move the Inspire up, down, forwards, backwards, left, right and do the clockwise and
counterclockwise rotation.
13. Use the remote controller to record several seconds of video and use the Playback button to
check the recording.
14.Hover the aircraft at a high altitude, i.e. 20m.
15.Carryoutadistanceandaltitudetest,makingsuretoshowtheDJIGOappclearlyinyourshot.
In an open space, distance and altitude should reach at least around 200m and 120m
respectively.
16.Test aircraft landing gear by lowering it until the landing gear lowers automatically. Skip this
step if using a Phantom 4 or Phantom 3 series product.
17. Land the aircraft, power off the aircraft battery and then turn off remote controller then stop
your recording.
Your DJI Care verification test is now complete. Upload your video link and personal details to the DJI Care website and wait for approval. REMINDER: DO NOT edit your video.
Once approved, DJI will inform you through email. Thank you for your cooperation.
--
DJI Care視頻驗證教程(Inspire 1 V2.0示例)
歡迎使用此DJI教程視頻進行DJI Care視頻驗證。
要使用DJI Care保護您的天線系統,請執行以下步驟。
DJI Care視頻驗證要求:
1.在同一畫面中顯示飛機,遙控器和DJI Go應用。
2.在明亮開放的室外區域拍攝視頻。
3.飛機和雲台的序列號,請確保兩個編號都清楚
確保視頻清晰清晰。請勿編輯您的視頻。
在驗證視頻中,請按順序拍攝以下物品
可見(對於Phantom 4,僅需要飛機SN)
4.打開遙控器和電池
5.進入DJI GO App並在戶外校準指南針(建議開放空間)
6.使用DJI GO App格式化SD卡。格式化之前,請確保已對其進行備份。
7.檢查IMU。
8.通過上下左右移動來演示萬向節俯仰運動和旋轉。
如果使用Phantom 4或Phantom 3系列產品,只需向上和向下傾斜即可。
9.用 (遙控器) 啟動 (空拍機)。
10. 將飛機懸停在航標高度1.2米到6米的距離之後啟發。
如果使用Phantom 4或Phantom 3系列產品,請跳過此步驟。
11.向上,向下,向前,向後,向左,向右移動Inspire,
並按順時針方向逆時針旋轉。
12.使用遙控器錄製幾秒鐘的視頻,然後使用“播放”按鈕檢查錄影影片。
13.將飛機懸停在20m高處。
14.進行姿態和高度測試,確保在您的照片中清楚顯示DJIGO。
在開放空間中,距離和高度至少應達到200m和120m左右
分別。
15.(Mini不用)放下飛機起落架,直到起落架自動下降。忽略這個
如果使用Phantom 4或Phantom 3系列產品,請執行步驟。
16.降落飛機,關閉飛機電池電源,然後關閉遙控器,然後停止您的錄影。
-----
您的DJI Care驗證測試現已完成。將您的視頻鏈接和個人詳細信息上傳到DJI Care網站,等待批准。提醒:請勿編輯視頻。
一旦獲得批准,DJI將通過電子郵件通知您。謝謝您的合作。
Негізгі бет DJI Care超過48小時 拍攝方式 mini 範例
Пікірлер