Yep, I believe you have done a service for the community here sir!! 👍
@tinypantsfpv3303
3 жыл бұрын
My V2 Goggles are having this issue right now, currently they are just a paper weight until this firmware gets released. Thank you for posting this video and getting DJI focused on this problem.
@Cre8ionz.
3 жыл бұрын
What I'm asking myself is: Once the V2 Google is activated, can't you just downgrade and change the "mode" and update / upgrade the Firmware again ?
@tinypantsfpv3303
3 жыл бұрын
@@Cre8ionz. No, when the battery died something got wiped. So even after upgrading/downgrading the option is not there, stuck in the wrong mode with no way to switch back on any of the available software version using the DJI_aftersales account.
@Cre8ionz.
3 жыл бұрын
@@tinypantsfpv3303 aii 😬🥴
@josefdahari
3 жыл бұрын
The man who got it done baby !!
@princesfpvdrones
3 жыл бұрын
Thanks for this video! I have had the V2 goggles since their released. It took me a very long time to drum up the courage to even turn them on during this debockle. I did so a month ago and registered them but did NOT update them but bound them to the air units. All worked great and it works great in audience mode. I still have my V1's and that is what I am continue to use.
@jlester42
3 жыл бұрын
Thank you for the update. And thank you for bringing attention to the issue, and working with DJI. I originally wanted to just get the V2 goggles and the Air Unit, but decided to go ahead and get the DJI FPV Drone system, and also purchase the Air Unit. This would explain why I have not had a problem switching back and forth.
@100SteveB
3 жыл бұрын
Well done Ian, sounds like they have finally taken notice. But it still puts DJI in a very bad light for me. They knew about this issue, yet chose not to do a thing about it. They were more than happy to leave people with a pair of goggles that were useless, with the only option of sending them back to a service centre. I have never been a DJI user, but I was getting more and more tempted into getting the goggles and a couple of air units. But then of course DJI decided they were no longer going to build air units - just leaving it to a third party to build and supply them. And then on top of that we have had the total chaos that's reigned since the V2 and the fpv drone came out. The whole debacle has simply put me off DJI full stop. I just don't trust them. I am going to wait to see what else comes on line in the next year or so, be it shark byte, or something else, that is where my money will go. DJI have shown one too many times that they simply don't care.
@MOEMUGGY
3 жыл бұрын
Don't try DJI, you won't like them. HD is so overrated. I would much rather fly 420p with a transmission signal that will not transmit through wet cardboard. We'll show those big DJI CEO's for not acting fast enough fix a problem that only affected 2% of users. (Rolls eyes)
@raynerfpv2471
3 жыл бұрын
Awesome vid once again!, Also a bonus to hear you say "eeeeh unit" :D
@rocoltro
3 жыл бұрын
Great video and iniciative. I have the V1 but I think DJI needed a "push" to solve this issue, not sure why they were not working on it, and videos like this one really helps! Thank you for the videos and for the help you give to the community!
@AlfieDoug
3 жыл бұрын
I have the V1's but appreciate what you have done, it has been a bit of a David & Goliath marathon.
@markwestergren1709
3 жыл бұрын
When will the fix, aka the new firmware be released? We have firmware v01.01.00. This firmware version doesn't fix the problem.
@dailydronejourney
5 ай бұрын
When I was read all of your comment, one of your comment said problem still exist even you have new firmware. so my conclusion the problem is not firmware, but the hardware right ?
@henrikfredlan775
3 жыл бұрын
Thanks Mad! Everything woooorks with the new Firmware!!!!! Even activating the Goggles!🥳
@jakewarrensford8418
3 жыл бұрын
Great video! Thanks for demonstrating the issue too and bringing awareness. Subscribed for sure!
@GeorgeCooper_LoneWolf
3 жыл бұрын
Well done for this update video, keeping everyone informed, and it sounds like good news for pilots who had the problem, and great news for DJI (more sales lol)
@NoviceQuads
Жыл бұрын
Now that the 03 air unit is out. My issue is after updating firmware. Once again I cannot get out of dji fpv mode to fly my caddix birds please HELP
@BigJayCL
3 жыл бұрын
Update Ready Today! all working Perfect!
@randyloader
3 жыл бұрын
Well done Ian👍
@erikniemi1977
3 жыл бұрын
Nice, it's not a perfect fix but any fix that keeps the googles from bricking themselves into FPV drone mode is appreciated.
@vitaliyburovart
2 жыл бұрын
how do I connect tbs fusion to dji v2? I have the adapter but don't know what other things to do to make it work... Thank you
@illusionistsam
3 жыл бұрын
Great job its fixed and i have just activated mine
@cinerigsindia
3 жыл бұрын
How did you fix it?
@illusionistsam
3 жыл бұрын
@@cinerigsindia brother i didn't i simply updated and it automatically updated dji has fixed it
@frizzle101101
3 жыл бұрын
Hey looks like u stopped preaching no continued support...and actually started causing things to be solved good job
@Rip1Outdoors
3 жыл бұрын
Thank you sir!!!!!!!!
@southwalesdrones281
3 жыл бұрын
Great stuff as always dude!
@typxxilps
3 жыл бұрын
congrats ... 19500 is just 500 to go to make the 20K subscribers mile stone. Have not believed that they would fix that issue so fast cause the other issues did take longer. Hope that this one will fix it really and not just for 2 weeks till the next issue might appear. Still waiting for the dji overall strategy regarding a Mavic 3 or X and support of the goggles and air unit. For sure I am not willing to invest again if that is not working from the beginning. For know I buy the old air units and stay with the Mavic 2 since a battery fix had become available to last those Mavic 2 batteries longer.
@andrehope8994
3 жыл бұрын
When will the firmware be out? 5 days or 5 weeks? Maybe you do not know, but as soon as possible i hope and will not have that problem again.
@MadRC
3 жыл бұрын
Days than weeks I believe.
@PavelRumberg
2 жыл бұрын
I got a dji fpv combo in Israel, and I didn't have the option to switch to dji mode. A didn't have an AV input option ether. When I wanted to get an AV input working, I thought that the option for AV will appear when I actually plug a 3.5 inch connector to the AV input. I tried and it worked. The AV input option appeared and the air unit mode appeared as well... The problem was solved for me instantly and I was able to connect to my air unit. After that, I had no problem switching between the fpv drone and the air unit at all.
@dailydronejourney
5 ай бұрын
I've tried, plug a 3.5 jack connector in AV Input, but the menu switch to dji mode still not exist.
@droneseyeview8327
3 жыл бұрын
Will this fix the activation issues with the v2? I still am unable to activate my v2 paperweight. Happy to hear this resolves the low batt issue. But will this let me finally activate my v2 without issue? Thanks for the persistent work on your part!
@MadRC
3 жыл бұрын
No not as far as I am aware. Are yours stuck in FPV Drone mode not activated? Is so I would return to your dealer.
@andrewjamez
3 жыл бұрын
Would be nice if they could update other common features users are dying for...
@henrikfredlan775
3 жыл бұрын
Had a mail conversation with DJI support! And he told me to do the DJI_aftermarket thing with the Firmware 1086. But I reply and told him that this Firmware is gone!?....but ask him nice and friendly to put it back!...🤣
@jordigrau3625
3 жыл бұрын
I put little hate in comments of the last video where you didn't recommend to buy it. Now I understand the point of the video. And i am sorry. Thanks to pushing DJI to release the new firmware.
@peteypufffpv659
3 жыл бұрын
Does the update keep the airunits bound when switch over the fov mode? Or do you still need to rebind everything? Great video and thanks for keeping us informed
@mattraymond2935
2 жыл бұрын
I'm getting video freezing v1goggles on the v.606 firmware update and not on v.600 the Vista won't roll back any fixes?
@jimreynolds8284
Жыл бұрын
low power mode unable to record and no mater what i do it wont fix and i did everything from tx and rx swop to changing power mode. have any ideas?
@Josepdlf
3 жыл бұрын
And what about the V1 users? we have been abandoned by DJI and punished without FW updates. We have been the guinea pigs that have helped to test the system and now they pay us back with indifference.
@mikieperdue69
2 жыл бұрын
Just purchased my new DJI fpv drone I've updated all and I can't seem to get the motors started what am I doing wrong can you please help
@samsonscw4279
3 жыл бұрын
Thank you for what you have done👍
@manc01
3 жыл бұрын
So the issue of having to rebind when you swap between the FPV drone and the air units cannot be fixed then? If so that is more than disappointing. I haven't switched between them both for a while as I did hear that it can cause issues if you do this too often although I am not sure if that is factual. If we have to constantly rebind I am sure that lots of us will be very unhappy about this.
@larsulrich3356
3 жыл бұрын
What quad/multirotor drone would you recommend for using the DJi v2 and DJi air unit with a spektrum DX8E radio for a beginner pilot?
@xavier_arthur
3 жыл бұрын
Excellent 👌😊
@CertsUAsPilot
2 жыл бұрын
I bought an air unit Caddx and FPV goggles V2 a week ago and both have been updated to v01.00.6060. I can see the video feed in from the Polar camera while in the Digital FPV mode. However, when switched over to the DJI FPV mode, I get ‘image transmission signal lost’. While in the DJI FPV mode, I connected the goggles to the DJI Assistant 2 where it showed the current firmware as v01.00.0606. It also showed only one latest firmware version available for upgrade, v01.02.0015. I had watched your video about the DJI FPV 01.02.0015 Stealth Update, so I still haven’t upgraded the goggles to the v01.02.0015 yet. Is the reason I get the ‘image transmission signal lost’ while in the DJI FPV mode because my goggles don’t have v01.02.0015 firmware installed? Thank you for all the informative videos.
@PaosElectronicDreams
3 жыл бұрын
Welcome to the 2ND season of Operation Overlord. Good news!
@giorgi22bm
2 жыл бұрын
i have the same issue with V2 every time i power it on then transmittion is lost !!! This is disappointing !!!
@yakplateado1923
2 жыл бұрын
I got the fpv combo recently and the option won’t appear even after binding it to the fpv drone. Any idea why this might be happening?
@zerogravityarts
3 жыл бұрын
so whats the deal with the situation that doesn't allow everyone to even activate the v2 goggles or show up in the assistant software @dji
@PhilipKittelson
3 жыл бұрын
Thank you for the video. I had a similar issue. When my V2 goggles started to get green lines and moments later lost the image on both viewfinders and they remain that way. I only get a black lit screen that turns on and off (The image still shows through my phone on the DJI fly app). I’ve contacted DJI and they want me to send the goggles in to see what’s up, but it’s a hassle because I live in Bolivia. Any suggestions on what might be the problem and a fix? Thank you in advance for any info.
@tarasflonts6166
2 жыл бұрын
I have exactly the same problem, first the green lines then the black screen, how did you solve this?
@svendeclercq5160
Жыл бұрын
So what us the fix? i have this problem that my batterie died while flying and now i cant go back to fpv (vista) mode... I’m on v 01.00.06.06 with the root mod and fcc haaks so i can,'t downgrade to 015 version. It seems the problem came back and there is no fix anymore
@RCREVIEWS101
Жыл бұрын
End of 2022 and I just got one Google V2 brand new (old lot?) and bricked from DJI, --- STILL NO FIX VIA FIRMWARE ---- will need send back to them for replacement
@tarasflonts6166
2 жыл бұрын
goggles started to get green lines and moments later lost the image on . I only get a black lit screen
@t-producciones5138
3 жыл бұрын
You da man!!!! We are all glad you made that video! Question. Do we still have the problem for V2 goggles...we cannot update to the latest firmware?
@user-vl7mi3dx9j
2 жыл бұрын
End of january 2022, faced the same issue, goggles has the latest firmware version and now I need to find official store to fix that
@lstavenhagen
3 жыл бұрын
So is the new FW that's coming part of the long-awaited more general FW update that addresses all the other problems? Or is it only an update to the goggle FW?
@MadRC
3 жыл бұрын
The update is more for the FPV drone side of things than anything else. Other than this I see no changes to the FPV system mode. For things like the rebinding on changing modes that likely never to be fixed as it’s a more complex limitation of the way they dual boot.
@lstavenhagen
3 жыл бұрын
@@MadRC Ok, thanks for the info. I'm not surprised about the rebinding-on-switch; I figured that was a non-trivial problem. You can only bind to one FPV drone at a time, for example, which tells me whatever hardware/firmware is used for the binding support is wiped out each time you bind to an FPV drone. I won't try to pump you for info on what gets fixed on the FPV drone side, but since I have the FPV drone too, I'm highly interested in things like will they improve the tune, etc...
@Zzxii
2 жыл бұрын
Now that it is the future, what was the official firmware number that fixed this issue? I suspect for future readers the answer to my question is v01.02.0000 but would prefer an expert to answer.
@maxun1
3 жыл бұрын
Fantastic video.
@henrikfredlan775
3 жыл бұрын
So basically this Firmware will not work, and will not let me activate the DJI Goggles V2, so I can choose the FPV Air Unit mode?
@giladkeshalesfpvpilot
Жыл бұрын
I have this problem. How can I fix it?
@hensidetv
3 жыл бұрын
Thanks sir 👍
@fickjr1
3 жыл бұрын
Any late information about new firmware? Any knowledge of a work around?
@tinypantsfpv3303
3 жыл бұрын
Mad Tech, can you please point us in the direction for the fix, waiting on DJI is getting ridiculous.
@MadRC
3 жыл бұрын
I was told this week, If nothing by friday ill try to find out. more. are you locked out ?
@tinypantsfpv3303
3 жыл бұрын
@@MadRC Yes I am locked out. Battery died during use 10 days ago, no DJI dealer near me. Unable to fly with my 3 air units, sucks.
@matixnznz
3 жыл бұрын
@@MadRC i got locked out yesterday as well...
@austinderby3538
3 жыл бұрын
Been locked out for a week and a half now......
@dailydronejourney
5 ай бұрын
so how do you solve this issue@@austinderby3538 ? please advice
@michaellahey2690
3 жыл бұрын
I bought them in March and sent them in to dji 2 times first time they sent me a new pair then the second time they claimed to have replaced a board in it. I just got them back yesterday and they still won't allow me to do anything.
@le_coelho
3 жыл бұрын
Ola meu amigo sou do Brasil, acabei de comprar um Goggle Fpv V2 e o firmware instalado de fábrica não permite a conexão com a airunit esse problema não ocorre somente quando a bateria acaba, seu video anterior foi muito importante para alertar a comunidade FPV esse problema precisava ser denunciado ....... a DJI não conseguiu resolver meu problema e parou de responder meus emails de suporte...... a solução deles foi que eu devo conectar meu goggles a um drone fpv DJI mas não conheço nenhuma pessoa que tenha esse drone.... acredito que ninguém deve comprar o goggle até realmente o firmware ser lançado e testado, essa atitude é muito descaso com o cliente, aqui no Brasil esse goggle é muito caro para termos esse tipo de problema e mesmo que o valor fosse pequeno a empresa tem que ajudar os clientes com agilidade. Hello my friend I'm from Brazil, I just bought a Goggle Fpv V2 and the factory installed firmware does not allow a connection to an air unit this problem does not only occur when the battery runs out, your previous video was very important to alert the FPV community this specific issue be reported ....... DJI was unable to resolve my issue and stopped responding to my support emails ...... the solution was that I must connect my glasses to a DJI fpv drone but I do not know no one who has this drone .... I believe that no one should buy the goggle until the firmware is actually released and tested, this attitude is very neglectful of the customer, here in Brazil this goggle is too expensive to have this type of problem and even if the amount was small, the company has to help customers quickly.
@stelliosskouloudis703
3 жыл бұрын
can the drone link the the other OS or is it just air units??
@Freebird_67
3 жыл бұрын
I’m seriously thinking there is an issue with V2 goggles and Airunits or DIY
@centralpennrealtor
2 жыл бұрын
New user here and I'm locked out. How can I go back and get bound with my vista? I have the latest firmware and see no option to go back...
@DriftaholiC
3 жыл бұрын
Does the video out via usb (the recent hack) still work on new firmware?
@MadRC
3 жыл бұрын
Yea no changes.
@SusiSpecial
3 жыл бұрын
A couple of weeks.... OMG, how much QA are they doing for an issue which exists since the release of the V2 goggles? Have they fired so much Engineers that they don`t have enough ressources to fix issues? I hope they deliver soon the fix, however I can`t believe it because of past DJI firmware fixes for any of there products coming so late or never... Personally I wouldn`t take the warning video down until they have REALLY fixed it.
@MadRC
3 жыл бұрын
It’s not down down and o have a copy of the beta. The fix has been tagged onto a firmware that was due for release anyways. I’m really not sure they were aware this was as much of an issue as it was. It seems not everything makes it back to dji.
@userman444
2 жыл бұрын
Thats great, but what about remembering drone when you switched to one mode and back. Right now you need to RE-BIND everything again. Controller and Goggles. The same story if you switch to the custom build drone from DJI FPV Drone. It also doesn't remember anything and you need to bind everything again ! Its really major issue. Any news from DJI regarding fixing that issue ?
@peteyfpv2217
2 жыл бұрын
still works great on v2 with vista's
@Dji.kuldeep
2 жыл бұрын
Hello sir I have v2 goggles I try to connect it with dji fpv drone but its not binding I upgrade v2 goggles but i dont find fpv mode Any suggestions ?
@dailydronejourney
5 ай бұрын
how bout now ? do you still have issu e?
@Freebird_67
3 жыл бұрын
Well I’m stuck in Dji fog mode can’t get out! I don’t own fpv drone just air units.
@aivassilis
2 жыл бұрын
when i switch from air unit to dji fpv i have to bind my dji drone again with the goggles and then bind again my quad with the air unit also.... it doesn keep them
@MadRC
2 жыл бұрын
Sadly this issue remains. It’s only the forcing it self into the wrong mode that’s been fixed.
@grandykim
3 жыл бұрын
This just happened to me. I had the goggle for 1 week and it was working fine with my DJI air unit but I changed the settings myself by mistake. If you go down to About and SCROLL down to the bottom, there is an option to switch back now.... I freaked out when I didn't see the option (didn't think to scroll down in my panic).
@dnumdug
2 жыл бұрын
Exactly what options do you have and choose from the "about" meny to fix it? I still have mine not operational, and I have the 01.00.06.06 update on them.. Please help..🙏
@TomColontonio
3 жыл бұрын
My goggles only show the DJI logo now. I couldn’t get them to work with the air unit although the osd shows but just the logo
@MadRC
3 жыл бұрын
Are they in FPV or drone mode. You can see in my screen shots the difference tween them. Are they the V2 ?
@TomColontonio
3 жыл бұрын
@@MadRC turns out the camera ribbon was loose.. thanks !
@madforit9661
2 жыл бұрын
The letters NA are displayed o my goggles What does this mean?
@MadRC
2 жыл бұрын
This usually means no telemetry is being received from your flight controller.
@Sir_Hubris
3 жыл бұрын
Thanks for sharing! ¶ :-)
@dnumdug
2 жыл бұрын
Wich update do we need for this, and where in the meny do you get it back for air unit? Can someone please describe the prosess from a-z🙏?
@MadRC
2 жыл бұрын
Just update to latest FPV system firmware version ending in 0606 that has the fixes.
@dnumdug
2 жыл бұрын
@@MadRC I have the 0606 but can't find the fix...
@dailydronejourney
5 ай бұрын
actually I'm on 0606 firmware@@MadRC , so it must upgrade higher right ?
@jmcjmc5587
3 жыл бұрын
5:00 I have killed two lipo :-)
@kayrothewagon
3 жыл бұрын
Imagine they also “fixed” the dji fpv video out
@MadRC
3 жыл бұрын
No nothing changed. I tested that. All hacks and all mods remains the same.
@christianjohnsson4186
3 жыл бұрын
I just recived my v2 goggles and was not able to activate them. I tried the aftersale account but was not able to downgrade. Today when I tried the aftersale I was able to upgrade to 01.01.2201 (?) and that solved my problem. When i rebooted I was able to switch to the digital fpv system and then the DA2 asked me to activate!
@RazvanSecu
3 жыл бұрын
upgraded to 01.01.2201 but i see no option to switch to the digital fpv system
@christianjohnsson4186
3 жыл бұрын
@@RazvanSecu That's wierd. It appered for me under Settings > About > Switch to digital fpv system. That option was not avalible on my first firmware 01.01.0000.
@RazvanSecu
3 жыл бұрын
@@christianjohnsson4186 tried all options, all softwares, all accounts and for the record i can only see 1806 not 1086 and no option to switch to fpv.
@christianjohnsson4186
3 жыл бұрын
@@RazvanSecu Sorry to hear. I can only see 1806 too and 2201 (the one i use now) I updated to the 2201 and then logged out of the aftersales account and logged back on to my own account and it asked me to activate the goggles.
@dailydronejourney
5 ай бұрын
So, how the result now @@christianjohnsson4186 ? How to activate your goggle ?
@lostdeath4202
3 жыл бұрын
So how do you fix it this helped nothing
@phuocthiennhantam7970
3 жыл бұрын
Thanks you! when will they add new firmware?
@MadRC
3 жыл бұрын
Sadly I still don’t know. I was told last week.
@gustavomartins6360
2 жыл бұрын
Hey guys, my goggles are acting really weird after I upgraded, and I don't really know if anyone eles is having these problems. Most of the times I turn on the goggles it will just stay in a black screen. I managed to bind it to my caddax vista and was able to have video feed a couple of times and some of those times I got weird crackling screen just like in this video. Can anybody help???
@MadRC
2 жыл бұрын
This is usually battery issues. You can refresh your firmware via assistant 2 for FPV. Try thst first. If your using the V2 it’s possible your battery is bad or the usb c connector it not in well.
@csmarkham
2 жыл бұрын
7 months later, still happens with latest firmware. New goggles, new DJI battery Not caused by flat battery. It switched into the DJI FPV mode by itself and there is no menu option to switch it back.
@csmarkham
2 жыл бұрын
I registered and updated to v01.02.0020. Trying to bind to my Caddx Air Unit it switched over to DJI FPV mode with no menu after a few reboots during binding attempts to a BetaFPV 95X V3.
@csmarkham
2 жыл бұрын
I suspect (no proof, nothing in logs) that having the DJI assistant plugged into the goggles still after the update, while trying to bind is what tripped this software flow issue. Having conditional menus based on some product or registration is the software fault, IMO.
@joinjanis6986
2 жыл бұрын
how is it resolved? still have the issue with newest firmware..
@MadRC
2 жыл бұрын
Your goggles not allowing you to switch between FPV and drone mode ?
@AlanzFPV
2 жыл бұрын
@@MadRC I just experienced this same issue. Locked out, DJI Assistant 2 only offers the stealth “upgrade”. In settings menu I scrolled down to reset all but doesn’t fix it. I’m on firmware 1.00.06.06
@thekrosisslab4149
2 жыл бұрын
@@AlanzFPV same, i'm on firmware V01.02.0015 . If you will find solution pls tell about it
@dailydronejourney
5 ай бұрын
wow, do you upgrade from 0606 to V01.02.0015 @@thekrosisslab4149 ? I think when using the new firmware it will fix the problem. so how do you fix this issue ? Please tell me
@selective7648
2 жыл бұрын
Is this issue solved do you have an uodate video ?
@MadRC
2 жыл бұрын
yes it’s fixed in new firmware just update
@dailydronejourney
5 ай бұрын
update to firmwmware what version @@MadRC ?
@pepadrtik7229
3 жыл бұрын
Why I can not switch from 25mw to higher output power in my dji fpv goggles 2 ?
@MadRC
3 жыл бұрын
are you in low power mode? if your in CE area you will be limited to 25mw and you need to perform the FCC Hack, I have a video on that on the channel.
@pepadrtik7229
3 жыл бұрын
@@MadRC Gonna check it out, appreciate your work man 🙌
@mrtarika6414
3 жыл бұрын
Great achievement Mad. DJI is tough to move. Do you have any idea if they work on a fix linked to "SD card slow" on Air Units. This has been a well known issue for months now.
@MadRC
3 жыл бұрын
Not that I’m aware off. It’s not one I get at all strangely enough. Iv never had it on any of my Airunits. Will be interesting to see if the new CaddX/dji one does.
@mrtarika6414
3 жыл бұрын
@@MadRC Thank you for your answer Mad. I have several air units and they all do this error message. It isn't linked to the SD card even though the message refers to this. I asked Caddx about a potential new firmware and they said that they only put a new camera but firmware update is done only by DJI.
@aerialcraftibiza1069
2 жыл бұрын
Just happend to me 😏 any fast fix for this
@MadRC
2 жыл бұрын
Latest firmware fixes this.
@ZabkaSKYFROG
3 жыл бұрын
THX but still i cant repair my goggles :( i dont want to buy DJI FPV DRONE
@FiFa_FPV
2 жыл бұрын
Ничего не исправлено, я сейчас столкнулся с этой проблемой.
@MindRiderFPV
3 жыл бұрын
2 years using DJI AU and Vista...never happened...
@MadRC
3 жыл бұрын
If your using 2 years your in the V1 Goggles, these are not affected.
@MindRiderFPV
3 жыл бұрын
@@MadRC Had V1 now V2. No issue other than slow card. nothing against you...but it's not true. as it wasn't true about the reboot? Why?
@dailydronejourney
5 ай бұрын
can you try using the low battery in v2@@MindRiderFPV ? if you did and never happen like this video, please tell me.
@MindRiderFPV
5 ай бұрын
@@dailydronejourney Never used it, I look at the battery overall and cell levels, usually land at 3.6.
@dailydronejourney
5 ай бұрын
no for battery drone@@MindRiderFPV, but the battery goggle v2, the video tell goggle v2 battery.
Пікірлер: 147