On Amazon: *GIMBAL RIBBON CABLE: amzn.to/2PeCKl5 *PRECISION DRIVER KIT: amzn.to/3sJYCDB (Need 1.5mm allen and phillips) ~Longer Video I was Referring to: kzitem.info/news/bejne/26Zu3GubiZSLdo4
@samstyme4125
Жыл бұрын
I've seen many Mavic disassembly videos and yours is the only one that points out that the 2 small plates underneath having smaller screws on the outside plate. Good job!
@samuelakande166
4 ай бұрын
Hi bro Please how can I get gimbal ribbon cable for faith 2 Se drone
@shadow74uk
6 ай бұрын
Thanks for this video. I used it on conjunction with a more detailed explanation (not the one you linked, another one I found) but yours was easier to follow for getting at the ribbon. Bit fiddley in places (the yaw connector and folding took me ages!!) and I had a minor panic when the camera seemed to now work after re-assembly (my manual camera settings meant the shot was so underexposed it looked like a black screen!) but all worth 2-3 hours of work 🙂
@MyCoreU
16 күн бұрын
Thank you so much for this video. I was able to fix my drone even if all this seems overwhelming. DJI charge 100 dollar/ hour and i was able to this myself. It cost me 10 dollar for a ribbon cable from aliexpress and 1.5 hour of time
@youpmac1
7 ай бұрын
Just followed your video to fix my mavic good job thks
@davin1573
2 ай бұрын
a little late to this but any insight on what silicon to use or if it’s really necessary
@meone310
2 жыл бұрын
very discriptive and detailing video. I managed to replace cable. After repair, no more error showing on controller, however left control wheel on remote does not respond to camera, which means camera only stays in front position - stand still......any advise TIA
@BeerkegGarage
3 жыл бұрын
Thx for the upload
@nopiatl
Жыл бұрын
I had the same thing happened to me earlier last year when mine ran into a tree. That replacement of the ribbon cable isn't too bad
@cbell2257
2 жыл бұрын
Thank you for this bro! same thing happened to me.
@NoName-yr1jv
3 жыл бұрын
Nice fix 👍
@NoNonsenseKnowHow
3 жыл бұрын
Thanks my man. It was a PITA to route that tiny cable.
@JonDotExe
3 жыл бұрын
Dude. Get a pop filter. Great guide, but now I need to repair my speakers 😜
@mohammedal-faraj123
7 ай бұрын
Hi bro. I have same but no video picture come to the mobile, ist need to calibration first and signal will comes ?
@cdnturbo
3 жыл бұрын
Great video. Can you answer this? I have a mavic pro with a gimbal issue. Video feed is fine. I suspect it’s a ribbon cable problem . While I wait to do the repair can I disconnect the gimbal power and still have camera transmission? How would I do that ?
@NoNonsenseKnowHow
3 жыл бұрын
Thanks. And I'm not sure on that one honestly
@meridian8794
21 күн бұрын
I replaced the gimble with overload now my camera stopped working, checked the connections but fear the camera cable was only barely working
@blasterxx5691
3 жыл бұрын
Why don’t you have camera feed ?
@clarencewiles963
Жыл бұрын
What went wrong is you broke it 😂 but you called a good fix 😊
@metakis
3 жыл бұрын
Unfortunately I did it today, I just ordered a cable from China .. I hope to replace it successfully
@NoNonsenseKnowHow
3 жыл бұрын
Yeah it's not too bad a task especially if you have steady hands
@metakis
3 жыл бұрын
@@NoNonsenseKnowHow I'm not famous for my craftsmanship... :D
@NoNonsenseKnowHow
3 жыл бұрын
Me neither! Just take your time with it and you should be good. Maybe order two ribbons in case you mess the first one up. They are cheap
@ayeapprove
Жыл бұрын
I've replaced the gimbal cable and now I have no more video feed and the gimbal violently tries to calibrate and doesn't work. What can I do? Thanks!
@glitchhin332
12 күн бұрын
Did you ever figure it out?
@ayeapprove
12 күн бұрын
@@glitchhin332 Sent it off to a certified technician and even he could not figure it out. It was replaced by DJI in the end.
@tkinson
Жыл бұрын
I just followed this video to replace my gimbal cable. It all seemed easy to follow. Only now, the startup sequence seems wrong, and the gimbal overload error is still present. Do you have any idea what it could be? Here's a video of the startup sequence: kzitem.info/news/bejne/lGZpnJOqrZSrqaw
@mgvv7852
2 жыл бұрын
How in the hell is this a video of replaceing the cable you showed a video of common sense take the screws out
Пікірлер: 32