You saved my drone! And saved me from either buying another one, or spending who knows how much getting it repaired - thank you!!
@richardwharton8235
Жыл бұрын
Thanks for the tutorial!! You helped me bring my mini 2 back to life after crashing it. After I replaced the ribbon cable I started the drone up, it had multiple error codes, I restarted the remote and drone, when switched both back on it worked exactly how it should. Thanks for the help again!!!
@divinerobinson1726
22 күн бұрын
I usually don't comment on much but I gotta for this. (DJI Mini 4k) Crashed into a tree and luckily it tumbled to the ground for me to collect. Tore the ribbon cable. Followed this vid step by step and my drones up and running again!!! 10/10 video
@sergeynovikov91
6 ай бұрын
Brawo! Best Video Repair Gimbal DJI Mini 2. No empty talk, no water. You excellent technician. Thank You.
@lefordz8075
5 ай бұрын
Got it done but had a heck of a time plugging the tiny ribbon cables back in, thought for sure I was going to mess one up. Happy to report it worked out great and the mini 2 lives to fly another day.
@stevemazza
9 ай бұрын
Thanks for helping me save my drone!!! A crash into some trees resulted in a partially ripped ribbon cable and your video helps greatly in getting back up in the air.
@ricardasulozas
Жыл бұрын
Great, it worked as charm. Thanks to you I overcame disassembling anxiety!
@S.Overkamp
Жыл бұрын
My cable was broken after a crash. Watched this video and bought me a new cable on aliexpress. 2 weeks later it arrived and installed the cable with this video on the pc. Took some time, but the drone works again! I installed it on a mini 1.
@iRepairAutos
6 ай бұрын
Thanks for posting this video. Because of you I was able to repair my drone!
@andmotion5399
Жыл бұрын
Well, hallalo ja :) - after about 3hrs (ribbon connection wires slightly bent on arrival!!!, tried and tried, ended bending them badly trying to get to locate, then pulled them all back again comparing with the original cable- it worked -50mins!!!) - My drone works, no errors IMU/GPS... - It works - Thank you for such a clear video, likewise saved my a good bit of money.
@pierredeschesnes8608
3 күн бұрын
Great video. Thanks
@tracyj318
Жыл бұрын
Im in the middle of doing this step by step as you are in the video. So far so good .will update u on my end result. Waitin for ribbon now.
@orezculapte7207
8 ай бұрын
How it went?
@rihardsbimanis8390
7 ай бұрын
Did you do it? Does you drone work now?
@FrancescoCominetti
Жыл бұрын
I would like to add 2 info, connectors glue could be very hard, I used a soldering iron at 210° C Mini 1, SE and 2 ribbon cables are the same
@stevrgrs
3 ай бұрын
Bro you put back in a pre bent cable. Show people the CORRECT way to bend their newly FLAT cable. That’s the only real difficult part of this repair :P
@idegas39
Ай бұрын
New cable from Aliexpress for 5 euro and some time and effort. Works great!
@YoMichaelRay
Жыл бұрын
This video saved me big time! Definitely earned a new subscriber out of me.
@henrydavis2660
Жыл бұрын
Thank you so much! This video was simple and concise, yet detailed enough to get the job done. Saved my drone!
@devander6347
Жыл бұрын
Thank you for this video without you i would have spend so much more time and money, i purchased the cable and followed you step by step and now the drone is 100s again!! thanks
@mecdepaname7575
Жыл бұрын
thanks a lot guy, i fixed it with your video ! After a big crash at Zakynthos Navagio beach, it fly again ! Thanks from Paris !
@71k31
4 ай бұрын
Hat geholfen. Vielen Dank!
@Wcclark75
Жыл бұрын
just a thank you for the algorythm.. A huge help thanks for the guide
@palolargo8731
2 ай бұрын
excellent ill be able to fix my drone, you are the best
@whatspopping7992
3 ай бұрын
Thanks alot you save me hundreds of dollars
@5Mhz
Жыл бұрын
Thanks Bro your a Legend!! My done now works perfectly
@Ismacuch
6 ай бұрын
Thanks my friend, you saved me!
@BlazingGex
5 ай бұрын
oh yes, big success! thanks!
@gortech3898
Жыл бұрын
What a fantastic instructional video without speaking. You have talent, many I bet. Thx for sharing!
@leonardopereira_94
5 ай бұрын
Congratulations , you help me Very much 🤝🤝🤝🤝🤝👍
@Andrius-Lithuania
Жыл бұрын
My recommendation: gimbal assembly do AFTER every cable is attached to motherboard and MB in place. Cause I had difficulty to attach cable after I glued it before MB installation as on this video instruction.
@lleonardow_
Жыл бұрын
Thank you so much, bro! Saved my drone! ♥
@HidalgoTigrao
6 ай бұрын
Thank you so much!!!
@tornagawn
4 ай бұрын
No biggie but 2 gimbal mounts and the front left sensor, ?compass….were dislodged in a crash. Perfect vid to show fixing it.
@stevecorrao7170
7 ай бұрын
Thank you!
@antoniomarquez664
Жыл бұрын
Foi o melhor video de como trocar o flat ou desmontar o DJI mini 2 agradeço de coração esta de parabens 👍👍👍👋👋👋
@manuelrodriguez1338
Жыл бұрын
Increíble, funcionó a la perfección.
@JCAquino2012
Жыл бұрын
Amazing, tanks a lot for this vídeo from Brazil.
@bangaji7711
9 ай бұрын
Thx you so much 🙏
@arunp1449
9 ай бұрын
Thanks for the video, In my case after replacing the ribbon cable the Mavic mini is not powering on. Only the 4 leds shows up and turn off :(
@new.videos
Жыл бұрын
Fantastic video.. one question, what kind of glue are you using for the connectors. Can the glue used to glue the display on the mobile phone?
@ArgonautasDrone
Жыл бұрын
Ótimo drone, sofreu quedas, consertei e continua voando perfeitamente. Meus vídeos continuam muito bom.
@DennisMoreira
Жыл бұрын
Muito bem explicado. show!!
@robyhandoyo3384
11 ай бұрын
thank you
@MrLemurman
Жыл бұрын
As per instructions here, I ordered the #1 Phillips screwdriver. Once I got the screwdriver I tried it in the screws and it does not fit. Won't even go into some of the holes in the body. Will not fit in the prop screws.
@GunOfYear
Жыл бұрын
can you upload a video on how to replace the front led of mini 2
@joller79
Жыл бұрын
Does the ribbon cable also suply power to the camera feed? My mini 2 has no videofeed and no gimbal function, after crash
@TrippyGang2000
5 ай бұрын
Is it the same for mini 2 SE??
@Randalgoncalves
Жыл бұрын
It will works as the same for Dji mavic mini first edition?
@jaybhandari13
28 күн бұрын
Navigation system error what is solution
@thecan80an33
Жыл бұрын
Slight crash and it ripped this cable. Before I replaced it (thanks for the instructions) it would work but gave me the "Incompatible Gimbal Data" error and I couldn't fly. After repairing it just as you show here, I still have the same problem. Replacing that cable didn't help. Any idea on how to repair Incompatible Gimbal Data?
@businessmotivation4542
Жыл бұрын
How will flex cable attached into drone. How it will be connected to a drone
@MehdiOthman
11 ай бұрын
can it be replaced by the ribbon cable of mavic mini 1 ?
@Felipesilva-eu4rk
Жыл бұрын
ótimo tutorial
@jeangomes8161
Жыл бұрын
Parabéns gostei muito tirou minha duvidas
@miguelmitre6207
Жыл бұрын
Does this tutorial apply to Mavic mini as well?
@eddiedevine834
Жыл бұрын
Hi is there any chance you would replace the ribbon in my mini 2 drone the drone works the camera just doesn’t go up and down and I can see the ribbon is broke and the places I can find to do the work want what I paid for the drone is this something I could get you to do please
@Rocnfire
Жыл бұрын
I did this repair and it fixed the original problem but now it says navigation system isn’t working error code 30105 anyone know how to fix it?
@kirstybailey3977
Жыл бұрын
Hey, please help. I've followed this tutorial. When I turned back on a solid red light now the drone won't attempt to turn on? I've checked all points are correctly pushed in and are in the correct positions. 🤷
@KusagiTsuki
9 ай бұрын
look at error codes in app not at "red light"
@JOSHUA-xg7cs
Жыл бұрын
pls do tutorial video of gimbal calibration using python apps
@WaltusAurelius
Жыл бұрын
My drone will not turn on now that I have it all back together. Any ideas where I went wrong?
@andrewswimingpool
6 ай бұрын
Same
@angelmanuelcamacho8690
Жыл бұрын
But, yes yes yes, there's a big But, if you buy a new cable or gimbal, motor ect, then you need to calibrate the gimbal through your computer, an app that's called Python and it's a hassle to do it.
@FlightPattern177
Жыл бұрын
Just did this and there was no calibration required. Was basically plug and play.
@greattouchrepairs2574
Жыл бұрын
Pls Gimbal flex of min1 and min2 are they desam
@Jared-jv8fy
Жыл бұрын
What made you replace this cable
@Yehoshua.Matityahu
9 ай бұрын
came to see what i can’t see & found out… my bottom mount tore out so essentially i need a new chassis 😀
@john4491
Жыл бұрын
My mini pro 3 wing broke can you plzzzz do a video on that
@fireball2275
Жыл бұрын
I think you have more issues than it being Broken if it has wings
@ThiagoSilva-ie4gs
Жыл бұрын
Awesome. My cable just arrived and I'll try to change it as soon as I get a glue gun
@sousarogers
Жыл бұрын
Hello do you need to connect to the PC
@sousarogers
Жыл бұрын
After installing the new Flex cable,
@ThiagoSilva-ie4gs
Жыл бұрын
@@sousarogers no
@thatswhatsup5456
Жыл бұрын
How’d it go for you
@ThiagoSilva-ie4gs
Жыл бұрын
@@thatswhatsup5456 I took like one week to do this because it was more complicated than I thought but it's working like a charm so far.
@Jared-jv8fy
Жыл бұрын
I’m having a problem where it says gimbal stuck. I tried about everything, it worked for a minute and then it jammed again recently. My only & last idea is to fix the issue with replacing this cable. If anyone else has this issue and has solved it let me know
@AFishInC4603
Жыл бұрын
just to make sure, you aren't flying with the cover on are you?
@ScottMitchellMedia
Жыл бұрын
9:4o - I see what you did there ;p
@DrMarvinLara
Жыл бұрын
Is this Professor Frink from the Simpsons?
@christopherderksen5524
2 ай бұрын
I changed the ribbon and now have 1000 different error messages 😂 must’ve done something wrong
@drinrem
Жыл бұрын
What if the camera said it need to be calibrated my drone fell. The camera is not working. I already replace the broken cable.
@ilhamsalam5517
Жыл бұрын
Hey did you solve the problem.. I’m having the same issue please share if there is any info thank you
@drinrem
Жыл бұрын
no. It needs to be calibrated by technician. i cant find any software to calibrate it. i buy a new drone. hahaha. 😭😭😭
Пікірлер: 84